Has anyone here constructed an overunity system that works?

[stivep]

Investors from some of " modern mutants  of deep feudalism countries"  are  feared
that  by simply mentioning  their country name they
more likely become a big losers as Western buyers reacts to
their products  with disbelieve.However I do respect   population and values of every country .
(- that doesn't mean I will always agree with them .)
_______________________________
Rubtsovsk city in the Altai region of Russia.
The Lab599. Great website, good product available possibly only outside of Russia.
________________________________
Some of you  are  involved in, fishing, boats or ham radio and so on.
I'd say - I'm none of them, but In some areas I just simply shine with knowledge and experience,
like most of us Americans.
For these who are lucky to have license  this is great start with experiments:
-A to B  energy transfer .
- energy extraction from  the interface, originating in Schumann Waveguide ( the FE) 
free from risk of getting into a problem with law.
<sub>In Russia  highly likely there is problem at first, and  than all depends from how much money you have to shut and silence  the problem.
But any  absolutely any  Tx can do it , even  made  by you  PCB Tx.

Dr James Corum  used at first:
52MHz band</sub>
1.8 MHz band
137kHz
than he applied for permit to  be at 20kHz.
but everything  below 9KHz is license free in most of civilized world.
The lowest you go the better.
Zenneck  Wave https://www.youtube.com/watch?v=wIIABIU3tRw&t=1336s
works from  wavelength of the light to VLF  frequencies. 20Very%20Low%
watch?
Only  its name  changes from:
-Polariton https://en.wikipedia.org/wiki/Polariton to
-Zenneck Wave Sommerfeld-Zenneck,

___________________________________________________________

So at first we say WOW... Russians did it ,they can do something really good.
<sub>But than we look at PCB assembly and it doesn't seem to look like Russian made. Highly likely it is Chinese
Lack of injection mold form in aluminum momentarily says about likely small operation using our Western
CNC or its Chinese  version.
Obviously it looks like they couldn't make cellphone with CNC so they never made one .
....well they did make the biggest Russian joke Yota phone. But that's  only my opinion.

So the buyer may be  afraid that:
-no warranty will be served 
or
-is the device  legal in Western Word due to US and EU sanctions is for you to find out.
But I wish them the best.


Advice from my friend in research:</sub>

_{please consider used
ready to use old ham gears to start  just your experiment today evening
You can wind your Tesla coils acting as an antennas  to resonate exactly at bands listed above.}

_{Legal note: Opinion expressed in entirely my own  according to constitution of USA}
Precaution:
1. use at least 5 to 20m  coax cable  between transceiver and tesla coil  acting as an antenna,
    to prevent  damage from HV.
2. use transmatch ( antenna tuner) to match 50 Ohm impedance of output of Tx  to the antenna ( mandatory) !!!

_{Legal note : opinion expressed is entirely my own  according to USA constitution.}
Wesley

[stivep]

in regards of  my last  post:
if energy transfer between two points A and B is  made  with use of ready to use Ham radio transceivers  or  just  Tx(transmitters)
we need to remember:
1. output  power of the Tx can be very small (QRP) and it is  going to work.
2. it is much better and easier if instead of 1W it is 100W or more but we have other problems than.
  a. We need to  move  top capacitor in vertical  Tesla coil UP or DOWN  before we are able  to tune it to the Brewster Angle.
  b. In low frequencies  the distance   of NEAR FIELD  till it will become FAR FIELD  is larger, so the  receiver
      in form of LED. incandescent light bulb, RF Volt meter, or just  Ham Transceiver may react to regular EM wave in the air instead of desired
      EM wave from the interface.  And this is what we don't want.
  c.  The distance between A to B  should be minimum 22m when using Low  Power Tx at   frequency w.g 1.8MHz. 
       The lower you go the bigger  the distance is needed.
  d. this  training is  a must before you attempt to get   energy from Schumann Waveguide without any  Tx.

Wesley 

[Ilya Tsimbaluk]

Greetings.

lancaIV

I usually try google translator. This allows me to translate my thoughts faster.
Now we are going through the TRL-5 LEAN stage, this is the engineering stage. when we try to integrate a physical phenomenon into a real device. What we actually do.

Concerning Ether or broadcast - I had such an idea, and I hope. that I will do it. But this can be done already when there is a working prototype.
Now, at the moment, my colleague and I are setting up an experiment, because a
person wants to see it all with his eyes. secondly, he is a professional designer of electrical machines and drives.
But since everything is done on enthusiasm, it is difficult for me to indicate a deadline.

The simplest thing is to follow in the footsteps of the Shark, Vamus and wind up a beautiful and non-working craft so that people believe in another fake. But this is the easiest thing, and without it - honestly, it's terribly difficult. Because now we do everything with our own money. which are hard for us in this country.

So when Wesley talks about how hard life is for some individuals, I'm not sure. which is hard. But then. that as an inventor I am experiencing difficulties is a fact. But since I have no confidence. that someone will pay for my complaints - I have to somehow put up with it and move on.

As for environmental friendliness and other pleasant things - then I just count on it.

Now for Wesley's questions. I have a colleague, his name is Andrey. we plan to. that he would like the issues of negotiations with investors.

About excellent English. It's all Google. This is the Internet resource most influenced by the KGB. even in one video. in which you were poisoned. perhaps alcohol or vodka, this is probably because a special chip was inserted into the third bottle. which gets inside you and controls your consciousness. And even now you need to think about that. what you write is the influence of this chip that has penetrated to you.
These are such insidious FSBs.

I'm in the process now.

[Ilya Tsimbaluk]

I hope my jokes are received adequately.

As for the majority of Russian goods. then, as a rule, all these goods are made in China. It is probably suicide to create production in Russia. As a rule, this is China or India. But China is more common.

The reason is to stimulate the state.

But practice shows. that most people from the post-Soviet space are trying to get into Silicon Valley To do this, they organize a company in the same Delaware.

where to organize a laboratory? It's hard for me to say. I would work in the US in the future as I plan to devote my life to working on these technologies. my main dream is to influence the transport system. Because transport without borders or with its minimization is a delightful thing.

[stivep]

//Concerning Ether //
// now we do everything with our own money.// hard for us in this country.//
//I have a colleague, his name is Andrey. we plan // negotiations with investors.//
About excellent English. It's all Google.

Thank you Ilya.
For entire  world, Ether doesn't exist so for many of us  it degradates our discussion  level.
Can you use better "Google translator", as only one comment of yours was really good.
Time is going to fast, no negotiation with  Americans will go good ,
(disbelieve,sanctions, lack of confidence to deal with entities from your region.) and you need money now.
We can't sale anything anymore.
The country is  over-saturated with goods.
We buy, don't repair the product than throw it out, because  it was scratched, or button doesn't  work,
and than we buy new one, as everything is so cheap here.
We are spoiled with goods.
Excellent motor without application means nothing here so target is to attract  manufacturers, not end users.
But than.. our manufacturing  is  not in USA any more.
everything is in Korea drifting from China as China becomes contentious.
Some people say that after finishing deals with  Russia we going to   finish deals with China and if not than China finishes us.
Dealing with Chinese or Korean working in USA factory there, is likely not going to  help.
However an American  can try to approach the few who are still here.
_{your mileage may vary..( idiom)}

Wesley