Holcomb Energy Systems:Breakthrough technology to the world

[SolarLab]

I don't understand why the machine takes so long to count? I encountered such a problem, but it turned out that the conditions for calculating the initial data for the machine were incorrectly set. Sometimes it's worth breaking the calculation into parts.
My advice is, first you need to master the design element, and only then the whole design on a special software product.

As for the cutting of special electrical steel, you need to look for specialized companies. Perhaps they do not want to do this, they are unprofitable for a small order of an unformatted task, or they will deliver a sky-high counter.
Electrical steel is too brittle. Waterjet cutting is very suitable for this purpose, it does not overheat a thin sheet that can be deformed during laser cutting.

To get accurate results you need a "very fine mesh" and "very small time steps" therefore a "very long calculation" run.

https://www.youtube.com/watch?v=51woRXXoDug

Check the Ansys or other EM-CAE sites for further details.

Also, FWIW (Wesley), Solidworks creates the G-Code internally for you in their CAM add-on.

https://www.youtube.com/watch?v=2-SvDm4eZpc 

Plus, Laser Cutting thin electrical metal sheets is common as recently pointed out by Beginners Mind.
[just before the Troll Roll]

http://www.polarislaserlaminations.com/ 

And, yes, you can create excess energy (a.k.a overunity)!

[citfta]

What?

" -Some guy talks about delivery of G code."
I started to laugh too.

- "Is he milling or winding or he doesn't know.?" .............................
- "what is he winding the core or the core winding? "

G code is not delivered  it is written for particular CNC and its operation.
But most of it for particular operation, is simply generated by  CNC and its computer.
You  are not waiting  for G code delivery...

Wesley

Wesley, What has happened to you man?  For years I have followed your posts and you have until recently always been a voice of reason on the forums.  But lately it seems like all your posts are written to discourage others from their pursuit of an alternative energy source.


You know as well as I do that the part of your post I quoted is nonsense.  I worked for over 20 years repairing CNC machines.  So I am quite familiar with Gcodes.  In order for a CNC machine to make an accurate part the process has to start with someone drawing the part using a CAD program.  Then the CAD drawing has to be processed to generate the Gcode.  And then the Gcode has to be sent to the CNC machine before the CNC mill, lathe or whatever can make the part.  So the Gcode DOES get sent to the CNC machine.  It may be only in the next room or across town, but it still has to be sent to the CNC machine.


You post contributed nothing to the discussion except to try and pretend you know more than anyone else.  That is just not like the Wesley I have followed for years.  I wonder why the change.  Maybe you are an imposter as someone else suggested.


Carroll

[kolbacict]

I'm starting to think maybe you are not the real stivep!

It would be better if you  answered for my posts.
My questions are specifically on the topic of the device.

[stivep]

Wesley, What has happened to you man?  For years I have followed your posts and you have until recently always been a voice of reason on the forums. 
But lately it seems like all your posts are written to discourage others from their pursuit of an alternative energy source.

Carroll

Everything is good with me.
It is just dejavu  from  few years ago  when SolarLab was very aggressive to me. that's all.
Very much natural reaction to you too when  someone steps to many times on you  and you are trying to be nice.

deception, trolling, not doing the required work and lying!

It is an accusation
this is the largest and most known FE forum in the world.
But we need value and advice here not trash.
e.g.
Re: Wesley's  Kapanadze and other FE discussion forum  « Reply #3736 on: Today at 07:34:16 PM »

__________________________________________________________________________________________
When you look at video posted by me my post was very much on the topic of what they call here "electrical steel."
https://youtu.be/DNxob3yY4LE
You have the same attempt there ,of getting 15kW form 10W.

I am supporting all kind of work, and activity that doesn't make people losing their time and money.
Nonsense of repeated talking about nonexistent OU, brings value of this form down.
You want Free Energy or energy for Free - that I support but not Ether, OU, or Time travel or anti gravity..
although I'm open to discussion if someone has valid scientifically recognized  counterarguments.
e.g

And, yes, you can create excess energy (a.k.a overunity)!

Solar lab colliding with laws of thermodynamics, has Zero of  scientifically recognized  counterarguments as they don't exist.



For the past 12 years I have not seen, so much of text, from individuals having no idea what they talk about.
Throwing terms, phenomena, e.g "zero point energy" that   "backfills into the copper wire"
and "Motionless Switching Magnetosphere Electric Generator." 

It is below level of imagination of 12 years old students at the  selected  physic class I am involved with.
But it looks like now everything is changed.

10 years ago it was discussion where everybody wanted to understand each other with respect.
And now it looks like it is a competition.


-removal of accusers,and trash makers, was not invented by me.
Wesley

[SolarLab]

There is no OU device, and never was,
Please provide any scientifically recognized literature conforming that Overunity devices exists and its examples.
Please provide any scientifically recognized literature describing
"Motionless Switching Magnetosphere Electric Generator." its processes and its function.   

Convincing you that the Holcomb devices can, in reality, create Excess Energy is rather pointless.

You're free to believe whatever you want, as we all are. But, believing what can actually be seen inside
Holcomb's Lab - working devices - FPL datasets, varification documents, CAE analysis, eye witness
testimonies and on and on is more than good enough for me.

So, believe what your mind is telling you. That's no problem at all for the rest of us who have been there and
done that.

No amount of factual based evidence or solid science and engineering will change your mind - so it's not a
big deal in the whole chain of things.

Before long you'll be claiming that you actually invented it!