Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Downloadable Pic to help UNDERSTAND!

Started by Bruce_TPU, April 23, 2007, 09:44:09 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 2 3 4 5
User actions

turbosetch

#5
April 23, 2007, 10:17:28 PM
Anyone able to translate this to a schematic. I am having issues undrstanding the drawing. He refers to spark gaps.

Did I miss some thing did anyone actually build this and see it working or is this a theory that needs to be tested.

Bruce_TPU

#6
April 23, 2007, 10:24:19 PM
 :-X
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Motorcoach1

#7
April 23, 2007, 10:27:08 PM
Yes it looks very promising. looks like you were in a hurry , when you remake the drawing use bold line grids and keep everything in black and white so it is printer friendly . I'm sure you have thought about the SS control devise. THANK YOU FOR TAKEING THE TIME TO THINK THIS OUT. Mike

Bruce_TPU

#8
April 23, 2007, 10:35:19 PM
 :-X
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

giantkiller

#9
April 23, 2007, 10:36:57 PM
Quote from: btentzer on April 23, 2007, 10:24:19 PM
THIS IS NOT a Schematic.  The coils are important, but the controller is the key.  We must walk before we run.  Make 1 coil about 5" in diameter of stranded wire.  Take a FEW strands at each end, pulse HIGH FREQ into it, offset, first in one direction and then the other.  THE Spark Gap is also the location of the freq. inputs. HAVE a BIGGER STRANDED wire in between the two, and wrapped TIGHTLY around the 5" coil.  Place a PERM. Magnet Just ABOVE the spark gap, facing N_S.  (not touching, I don't think)  Take a voltage measurement, and then we can go from there. 

Like Steve said once you UNDERSTAND, the rest is wiring.  Someone better than I will need to come up with the SCHEMATIC of the controller and we can all work on the wiring of the completed coil.  But this will work!!!  And is a place to begin in the right direction!!

I have been the only one that incorporated real stun guns in my tpu circuit. Do you mean that I was that damn close? And did you know that there is an adjustable pc board based micro spark gap inside the stungun casing itself? This cuts down on the number of diode-cap stages for build up. oohweee! Radiant energy on the hip! I am a stungun slinger.

Fire 'em if ya got 'em.

--giantkiller. 8)

p.s. But safety first! No dogs, kids or birds! Be safe! Ok, call the significant other over for the test.
Print
Go Up Pages 1 2 3 4 5
User actions