Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Successful TPU-ECD replication !

Started by mrd10, June 12, 2007, 05:12:47 AM

Previous topic - Next topic

0 Members and 32 Guests are viewing this topic.

Print
Go Down Pages 1 ... 130 131 132 133 134 ... 358
User actions

Bruce_TPU

#655
June 30, 2007, 11:40:45 PM
Quote from: bob.rennips on June 30, 2007, 11:30:45 PM
Due to time zones 'tonight' can be hard to determine. How many hours from now approx. will that be ?

@ Bob R.
No, not Earl.  And I do not know what time zone this person is in, so that is a good question!  LOL

I enjoy your experiments very much!  Theory only gives direction until proven true/false and that is what experiments are all about.

I am glad that you did what BEP suggested with the diodes on the bifilar.  I was wondering what would happen...

Bob, how can this test ALSO be conducted on the ECD??  This so fits into TAO's statement that SM so approved of.  I am just so excited because piece by little piece we are going to make this happen.  His TPU is (easy, think diode, signal pulses) but it's complexity, very deep.

Happy, Happy Days!
Bruce  :)
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Bruce_TPU

#656
June 30, 2007, 11:52:09 PM
Listen up guys!

I have been asked to post the pictures and details for them.  When I receive them in my mail, I will start a new thread with the information.  Here is hoping all is accurate...;)

Happy, Happy Days! :)
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

bob.rennips

#657
July 01, 2007, 12:16:11 AM
Quote from: btentzer on June 30, 2007, 11:40:45 PM
Quote from: bob.rennips on June 30, 2007, 11:30:45 PM
Due to time zones 'tonight' can be hard to determine. How many hours from now approx. will that be ?

@ Bob R.
...
I enjoy your experiments very much!  Theory only gives direction until proven true/false and that is what experiments are all about.

I am glad that you did what BEP suggested with the diodes on the bifilar.  I was wondering what would happen...

....
Bruce  :)

NO. NO. This is not what BEP was describing with his 'infinity inductor' and bifilar coil stuff. Reread my thread!!

BEP was talking about using diodes to transfer energy out of a tank (resonating) circuit. I'm doing exactly the opposite. You don't want the oscillations. You don't want a tank circuit where the energy is being stored - oscillations deplete energy. You want only an electric field. An electric field, in this set up, stored in a coil has the potential rising from 12V at one end to 300V+ at the other.

You have to keep the energy IN. The diodes are not there to bleed energy out of a tank as BEP was suggesting. You have to use two diodes one on each end of the coil so that the BEMF cannot get out. If you use one, you do not get this affect, the energy dissapates.

I've already managed to get rid of the 10% oscillations. I can now bang the voltage straight up to 300V. This is pure changing of electric field.

We need to thanks MACEDONIA for putting me onto this route.


z_p_e

#658
July 01, 2007, 12:26:11 AM
Quote from: btentzer on June 30, 2007, 11:26:49 PM
Hey guys,

Just a heads up... An OU claim is coming tonight.  It is a "type" of TPU is all I can say.  They will tell you all about it and post pictures.  Just please do not overwhelm or bombard this person.  But stay tuned, it could be a very exciting night!

Happy, Happy Days!   ;D
Bruce

Bruce, If your friend has done his homework and due diligence, there will be no need for a barrage of questioning.

However, I would advise that they be well-prepared to be eaten alive if they have not. There have been too many IDI's already, and the troops are restless and may be unkind.

Darren

bob.rennips

#659
July 01, 2007, 12:35:29 AM
Quote from: btentzer on June 30, 2007, 11:40:45 PM
Quote from: bob.rennips on June 30, 2007, 11:30:45 PM
Due to time zones 'tonight' can be hard to determine. How many hours from now approx. will that be ?

Bob, how can this test ALSO be conducted on the ECD??  This so fits into TAO's statement that SM so approved of.  I am just so excited because piece by little piece we are going to make this happen.  His TPU is (easy, think diode, signal pulses) but it's complexity, very deep.

Happy, Happy Days!
Bruce  :)

Any coil that participates in holding the electric field has to be open circuit or it has to be adding energy into the coil - all with two serial diodes per coil. As soon as any coil that is participating in holding the energy is shorted, the energy is transferred to that coil.

****For example, I have a coil and another coil wrapped at 90 degrees to this coil. If you pulse and capture the BEMF as an electric field in one coil, as soon as you short the 90 degree coil, this BEMF energy appears in the 90 degree coil.**** EDIT: This original statement is INCORRECT. Subsequent tests have shown that shorting a 90 degree coil does not affect the stored energy. The statement does apply to a bifilar coil.

The electric field can be measured on the 90 degree coil (collector) when the main coil is storing the pulse.
END_EDIT.

The main concept is to rise the stored capacitance to as large a level as possible whilst at the same time moving this electric field in a circle. I'm getting some very interesting effects when the high voltage oscillations appear on top of the already stored electric field!! This has echoes of the Italian Device.

Print
Go Up Pages 1 ... 130 131 132 133 134 ... 358
User actions