The Lee-Tseung Lead Out Theory

[samantha]

(continued)

It turned out that the breaking of the two successful configurations into 4 new single disc arrangement was not a good idea. The continuous rotation time dropped to about 1 minute. Tuning with different hammer weights and lengths increased that to about 2 minutes. Hours passed and frustration started to appear.

Tseung: “Do not worry. I know I can always fall back to the original configuration. Let us experiment with loose coupling.”

Two loose coupling techniques were tried. The first one was using springs to hook up two independent wheels. The hammers were offset at 90 degrees. The coupling effect was observable. However, hours of tuning could not increase the continuous rotation to more than 2 minutes.

The second loose coupling was tried with magnets. Magnets were attached on both wheels repelling one another. The rotation of one will force the rotation of the other. However, hours of tuning could not increase the continuous rotation to more than 2 minutes.

Tseung: “Let us take a break and rethink the strategy. I am prepared to pay for two systems â€" one to take away, the other to be left behind for you to play.”

Sun: “It is no longer a matter of money now. We already accepted this as a money losing operation. We are all addicted.”

Tseung: “Let us turn our attention to another pulsing mechanism â€" that of falling weights. From observing the movement of the hammers, I know that at low speed revolution, the force of the spring is much less. The falling weight technique might be much better.”

Sun: “We tried falling weights before. Those were miserable failures.”

Tseung:  "What's that smell, is something burning?"

[ltseung888]

The more advanced rotating flying saucer element design
By Mr. Bill Fung in China

Attached is the more advanced design by Mr. Bill Fung in China.


In the conceptual design, there are two counter rotating circular donuts with some inner elements.  The elements are numbered with the following description:
Element 1 is the outer surface
Element 2 are the moving magnetic balls
Element 3 is the inner surface
Element 4 are the driver coils
Element 5 is the special shape to allow for collision to produce upward forces
Element 6 is a collector coil

The operation is as follows:
(a)   The magnetic balls 2 are driven by the driver coils 4 to move inside the donut shaped ring.
(b)   The driver coils 4 and collector coils 5 can be programmed to be interchangeable.
(c)   The combination of (a) and (b) is effectively a variation of the Adams Motor or the 225 HP pulse motor by the Jupiter Group from USA.  It can lead-out electron motion (magnetic) energy.
(d)   The outer surface 1 has a special shape 5.  When the attraction force is off, the balls 2 tend to fly away due to the centrifugal force.  They will collide with the special shape 5 to provide  upward forces.

Such a design produces both an electricity generator and a lowering in weight object at the same time.  There is no need to carry fossil fuel.  Obviously, there are much more details that need to be filled in.  However, it is theoretically possible.

Mr. Bill Fung and I are willing to accept jeers, cheers and insults.  Both Mr. Tong Po Chi and Dr. Raymond Ting are aware of the design.  However, they will work on theirs one step at a time.

Lee Cheung Kin said that this might be the design behind the Nanjing UFO video on youtube posted in June 2006.  You are welcome to post your comments.  We want the World to benefit together.

[broli]

Lol overnight 5 pages have appeared with some weird stuff.

[wang]

The more advanced rotating flying saucer element design
By Mr. Bill Fung in China

Attached is the more advanced design by Mr. Bill Fung in China.


In the conceptual design, there are two counter rotating circular donuts with some inner elements.  The elements are numbered with the following description:
Element 1 is the outer surface
Element 2 are the moving magnetic balls
Element 3 is the inner surface
Element 4 are the driver coils
Element 5 is the special shape to allow for collision to produce upward forces
Element 6 is a collector coil

The operation is as follows:
(a)   The magnetic balls 2 are driven by the driver coils 4 to move inside the donut shaped ring.
(b)   The driver coils 4 and collector coils 5 can be programmed to be interchangeable.
(c)   The combination of (a) and (b) is effectively a variation of the Adams Motor or the 225 HP pulse motor by the Jupiter Group from USA.  It can lead-out electron motion (magnetic) energy.
(d)   The outer surface 1 has a special shape 5.  When the attraction force is off, the balls 2 tend to fly away due to the centrifugal force.  They will collide with the special shape 5 to provide  upward forces.

Such a design produces both an electricity generator and a lowering in weight object at the same time.  There is no need to carry fossil fuel.  Obviously, there are much more details that need to be filled in.  However, it is theoretically possible.

Mr. Bill Fung and I are willing to accept jeers, cheers and insults.  Both Mr. Tong Po Chi and Dr. Raymond Ting are aware of the design.  However, they will work on theirs one step at a time.

Lee Cheung Kin said that this might be the design behind the Nanjing UFO video on youtube posted in June 2006.  You are welcome to post your comments.  We want the World to benefit together.

Lawrence, thank you so much for your theoretical design.  It is brilliant as always and backed up by top level math and science, and it therefore cannot be wrong.

But my friend, you spend too much time on this, trying to educate anonymous forum members, while your true friends like myself and Goldfield see so little of you.  You are not appreciated here, and I quickly learned that neither am I.  Why don't we just work on our inventions in private, where we are surrounded by educated peers who have no trouble understanding these concepts?

Come back to us, old friend, forget this hostile group.  And please, do not forget Goldfield.  Samanatha breaks my heart every time I see her.

[Top Gun]

Dear Mr. Tseung.

What is the result of the rotating device prototype when it is lying flat horizontally?