Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Self Running Micro TPU, with closed loop.

Started by EMdevices, November 12, 2007, 11:49:58 PM

Previous topic - Next topic

0 Members and 15 Guests are viewing this topic.

Print
Go Down Pages 1 ... 41 42 43 44 45 ... 139
User actions

eon

#210
November 26, 2007, 03:40:00 PM
im down to my last bc337 and i blew up my large blue led. anyway ive now got to grips with swapping things in and out without damaging them. as you can see, ive got no breadboard (yet), so its all a bit of a fiddly solder job.  im an electrical fitter or electro-mechanical engineer so electronics is not my forte.

im not going for length of operation until i have a greater range of components, but more to establish a model and vary it.

im happy to report that
identical cap outside the core at 9.6v gave run of 7.06, 7.08, 7.07 mins
identical cap (minus wrapper) inside core, gives 7.47, 7.43, 7.47mins

4Tesla

#211
November 26, 2007, 04:00:17 PM
Interesting!  So having the cap inside the core adds about 40 seconds!

One thing I would like to know is run times at 2hz, 4hz, 7hz, 14hz, and 30hz.  If the runtime shortens by about half each time upped then we can conclude that the frequency doesn't effect the efficiency of the coil.

Edit: or 2hz, 4hz, 8hz, 16hz, and 32hz

4Tesla

4Tesla

#212
November 26, 2007, 07:45:46 PM
I went shopping!  :)

I bought 2 of the FT114-77 1.14" ferrite toroids, 1 of the FT140-77 1.4" ferrite toroids, and 1 of the T106-26 1.06" iron toroids.
Site: http://www.oselectronics.com/ose_p88.htm

I also bought some red and green 20 gauge colored magnet wire (copper).
Site: http://www.bulkwire.com/colored_magnet_wire.asp

I'm going to buy some 20 gauge iron wire from my local Grainger store.. Grainger Item # 6A852
Site: http://www.grainger.com

4Tesla

Bruce_TPU

#213
November 26, 2007, 07:52:15 PM
@ 4Tesla

I think you should try the iron core.  I have it on good authority, that good things can come from iron cores, but not sure if so with this set up.   ;)

@ All

Hey guys,
I have been working feverishly to increase my time past 30 minutes and to no avail.  I have burned out all but three LED's and my best transistor.  I replaced the transistor tonight, and saw that my barium ferrite am radio antenna core coils have arrived!   ;D  Now this will be fun!  And we need to boost the voltage, but not the total wattage.  High voltage equals speed, and we need speed.  So any ideas to easily bump the voltage, would be helpful.  I am thinking of adding some part of the cold electricity circuit to this circuit.  That is my plan. 

I will let you know when something good comes, and I hope that it will!

Happy experimenting and happy holidays,
Bruce

EDIT:
@ 4Tesla
Please post the link to the iron wire, I could not find it on the grainger site.  Thanks!
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

BEP

#214
November 26, 2007, 09:13:40 PM
@btentzer


WW Grainger #6A852 is 'J' type thermocouple extension wire. It is composed of a positive leg of iron and a negative leg which is 45% nickel and 55% copper.

Select 'Grainger item number where 'keyword' is shown and put the 6a852 under that and click 'go'.

Interesting use of T-couple wire. Never thought of that! Might be interesting. Other types may be more interesting  :)
Print
Go Up Pages 1 ... 41 42 43 44 45 ... 139
User actions