Muller Dynamo

[Groundloop]

I tought u use something more professional.
I call myself an IT engineer and I don't recognize something simple like that... bad for me
I have edited the previous post to you

I do use other design programs also. But the Paint program is good enough for small and simple circuit designs.
Once you master the copy/paste and zoom in/out then you can make drawings very fast. :-)

I have moved the switch and updated the drawing with a 47000uF 25V cap.

GL.

[romerouk]

@woopy
good to see you arround.
Regarding the stranded wire:
Some time ago in a Bedini project I have built 2 identical coils but one with normal wire and another with stranded wire.I was using this coils to collect the power from the rotor powered with a Bedini standard circuit.Same core same wire diameter, all the same...
The results at that time(no load):   normal wire output was 9.2 volts
                                                stranded wire output was 12.3
since then I have always used stranded for most of my coils
it is easy to do the same experiment like me, actually it would be nice if someone else will confirm this.
I always try everything myself, I don't take all info I found as granted.
If I was wrong I would like someone to tell me.

@Groundloop
one more change to the drawing: input cap 47000uf

[toranarod]

@woopy
good to see you arround.
Regarding the stranded wire:
Some time ago in a Bedini project I have built 2 identical coils but one with normal wire and another with stranded wire.I was using this coils to collect the power from the rotor powered with a Bedini standard circuit.Same core same wire diameter, all the same...
The results at that time(no load):   normal wire output was 9.2 volts
                                                stranded wire output was 12.3
since then I have always used stranded for most of my coils
it is easy to do the same experiment like me, actually it would be nice if someone else will confirm this.
I always try everything myself, I don't take all info I found as granted.
If I was wrong I would like someone to tell me.

@Groundloop
one more change to the drawing: input cap 47000uf

Thanks for the info on the wire
thats all I need to know that is a good reason
cheers

[plengo]

this is to important to pass up
I am going to build one, I am not stopping my current project as it will work
as well. will have two motors on the go.
keep every body posted
cheers

Me too!

@Romero.

Excellent work man. I will replicate this too.

Would be possible to take good close up pictures of your motor of every detail and post it? sometimes pictures can answer a million questions and also helps with documentation.

Many thanks,

Fausto.

[penno64]

Hi all,

How wonderful it is to see so many going for it.

I dont know if you are religeous Romero but, GOD BLESS YOU!

Regards, Penno

p.s. Rod, I thought you would like this.