Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Working Magnetic Motor on you tube??

Started by Craigy, January 04, 2008, 04:11:39 PM

Previous topic - Next topic

0 Members and 45 Guests are viewing this topic.

Print
Go Down Pages 1 ... 176 177 178 179 180 ... 613
User actions

FunkyJive

#885
January 15, 2008, 03:36:24 PM
Quote... i got the impression after watching the first video in youtube that when he stoped the two smaller round magnets it sounded like a small electric motor kicked in and made the big rotor speed up.... i watched it many times, got the same impression each time.

Hi b0rg13

Presuming that it was not a faked video, even a pure-magnet motor would doubtless sound or behave like an electrically-powered motor if it were truly developing power and momentum.

Kudos to those trying to prove or dis-prove either way  ;)


All the best,

FunkyJive
"Invention has its value, but discovery is priceless"

"Faith from the wealth of negative speculation cannot deny faith from the sparks of promising experimentation"

"A quest of impossible odds is not driven by expectations of what is achievable, but by the certainty of what is not"

"It is not weak minds that perpetrate misconceptions, but strong minds heading in the wrong direction"

"Experimenters seek understanding from achievement, academics seek achievement from understanding, whilst sceptics would seek to deny them both"

"Once the world was flat lest we should fall off. Once man could not fly as he was much heavier than air. And so we arrive at another threshold"

BD Townsend

dean_mcgowan

#886
January 15, 2008, 03:36:52 PM
.. i get the impression he's a bit of a wiz with the truth (pun intended) ... hehehe

Bruce_TPU

#887
January 15, 2008, 04:00:26 PM
Hi Sean,

Your Stator Magnet Holders are looking very nice!   ;D

The only encouragement I would give, is to keep the top of the Stators to about the bottom of the rotor magnets as we discussed yesterday.  It would probably work above the rotor a hair just as well, but not on the same plane.

Fine tuning will be needed as you are well aware of. 

I wish the machine shop milling the three of ours would hurry!  LOL

Warm regards,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Grimer

#888
January 15, 2008, 04:08:39 PM
Quote from: Craigy on January 15, 2008, 11:45:12 AM
hi sean , built a few more of my mk1 stators using 2 separate 4 x5 neos in a wheel. while they all look identical, i have one of the three that does a AGW spin with a tickle. just bear that in mind wen testing and test all stators for performance, some work better than others lol
That's interesting Craigy. One of the things I soon learnt in 4 decades of materials research is that there is no such thing as a uniform material and one always has to check for variability. For example a 1% difference in density between concrete samples can make an 8% difference in strength. I believe one of the main reasons people were not able to replicate P&F's cold fusion results is that different batches of palladium have different properties. P&F got lucky with their batch. It may take quite a bit of fiddling about to reproduce Alan's machine - Anyway, congratulations on getting AGW. That is the first step on the road to Rome.
Who is she that cometh forth as the morning rising  -  Fair as the moon. Bright as the sun  -  Terrible as an army set in battle array.

sterlinga

#889
January 15, 2008, 04:17:50 PM
Quote from: JAG on January 15, 2008, 07:05:47 AM
posted at the Steorn forum

CommentAuthoroldHorseface CommentTime1 hour ago edited  permalink
I have build a quick and funky new system where I get a short burst of acceleration, then a sustained speed for 10 seconds, then it slows down to stop in 20 seconds.
My stator is the same one from my Lego setup, but my rotor is 12" in diameter with 12 magnets facing outward alternating north-south. (unlike the OCAL system or my last Lego setup)
I think if anyone is getting AGW lock, you got it happening, you just need to reduce friction and tweek your alignment.
As AL said, the distance between rotor and stator is citical and different for every type of system. Anyone building a test jig should make that distance variable.
I am going out to Burbank tomorrow to get more magnets (disc neos) and try some more things.
I have seen energy from permanent magnets! I think I'm going to cry.


Posted at http://peswiki.com/index.php/OS:MPMM:Replications:AuthoroldHorseface

If anyone has contact with this person, could you ask him to post photos, video, contact info?  I'd like to add it to the above page if that's okay.

sterlingda {at} pureenergysystems.com
http://freeenergynews.com and http://peswiki.com
"The best cutting-edge, clean energy news and directory service on the net."
Print
Go Up Pages 1 ... 176 177 178 179 180 ... 613
User actions