Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Working Magnetic Motor on you tube??

Started by Craigy, January 04, 2008, 04:11:39 PM

Previous topic - Next topic

0 Members and 6 Guests are viewing this topic.

Print
Go Down Pages 1 ... 230 231 232 233 234 ... 613
User actions

Bruce_TPU

#1155
January 18, 2008, 03:48:53 PM
Quote from: blue_energy on January 18, 2008, 01:28:09 PM
QuoteThe very fact that ANYONE would build something like this, and pour pessimism, evading the possibility of OU so vehemently is ridiculous. I would pee my pants as I think most of you would if you could make this thing run like in his video.

@unzapped
I think Als statement on Jan. 5 is a reasonable, skeptical, scientific way to look at it:

<<<
Please, no theorizing until we know the facts.
It spins, we don't know why, it's probably a worse mistake than even Steorn made.
Later I will be able to explore the issue further.
All this talk about Faraday meeting Saul on the road to Damascus makes me nervous.
>>>

QuoteHe already put up one video, a second better video would be very easy.

True.  It would be easy.  And if he were in the process of attempting to convince everyone that he has discovered the key to mankind's energy needs forever - it would be odd if he did not.  But, he's not trying to convince anyone of anything.  I suspect, at least, that he doesn't care what anyone else thinks.  Big Claims require Big Proof.  He has resisted the urge to bias his judgement by concluding anything until more research has been done.  He's asking us to allow what we see to be relegated to the realm of the unknown until there is more evidence.  Real science is stepwise, patient, and often boring.  As to why he hasn't made progress on it lately: he has said he has pressing commitments at work that demand his time.

QuoteReplicators keep on keepin on, but beware you may have nothing more than an interesting toy and a sore finger....

You may well be right about that.  But, the only way to know for sure is to experiment and see.  Any replicator who is only doing it because he 'knows' he's going to witness overunity - may well fail whereas those who are merely attempting to document the truth about this fascinating effect - are more likely to find it, whatever it is.


Hi blue_

I could not have said that better!   ;) :D ;D

The sound of reason is always music to my ears!!  LOL

Happy experimenting we will go, indeed!

@ Sean

Very nice video.  Great promise. 

Perserverence is not measured by the number of hours or days, but by the steady, patient tuning, of a man on a mission.  Thank you for showing continued diligence.   ;)

Three more of us will quickly be joining you.

Warm regards,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Bruce_TPU

#1156
January 18, 2008, 03:49:28 PM
Oops!  Dbl post.  :)
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

CLaNZeR

#1157
January 18, 2008, 03:50:27 PM
Quote from: Craigy on January 18, 2008, 03:31:54 PM
Mk2 in production , when will i learn lol..

Looking good mate.

Cheers

Sean.
****************************************
http://www.overunity.org.uk
****************************************

Yadaraf

#1158
January 18, 2008, 03:59:51 PM
Quote from: CLaNZeR on January 18, 2008, 03:47:40 PM
Quote from: Yadaraf on January 18, 2008, 02:37:35 PM
[
@ CLaNZer

I noticed that you have taped the OD of the rotor -- presumably to improve aerodynamics.

Al did not tape his rotor, and it's possible that subsequent air movement within the channels created a static charge.

Comment?


The Tape is to black out the edge with a reflective strip attached for the Tacho.


@ CLaNZeR

Is it possible that air flow through the rotor channels develops static charges?

Does the tape in your model need to block the channels, or can the tape be applied only to the area beneath the channels?

???

Thanks...

jwk

#1159
January 18, 2008, 04:03:56 PM
Everyone attempting to replicate this device, before you go any further you really need to ensure you have read this thread (below)  from start to finish (finish being a few day's after the video was released). There are many things mentioned on this thread that not all replicators appears to have picked up. height and distance of stators included.

http://www.steorn.com/forum/comments.php?DiscussionID=59687&page=1

Print
Go Up Pages 1 ... 230 231 232 233 234 ... 613
User actions