Is Lindsay?s ?SM? a fraud?

[innovation_station]

ok for the wireless grid i spoke of b4

this is how im starting to see it


btw i used to install wireless internet 

so we need a freq a carrier if you like  just for simplisity and it makes it easyest for me we will use 2.4ghz wirless internet gear    keep it simple and cheep !!!!!!

so we need a tower as an access point just a place of transmittion we will brodcast exacatlly the same as we do now a days lets use a 1 watt amp

so we would want an omni antenna on the access point so we have 360 deg of transmittion  ok thats it for the access point  this is line of sight transmittion ....

now on the recieving end we need a reciever be it what ever i personally would use tubes in my final network  but we will use a 2.4 ghz bridge ...  and an atenna ...

the bridge will recieve what ever we transmitt from the tower ...   what goes on next  is simple  my tpu's will have no control curcuitry in them  they will be sent signals fron the bridge that will activate the coils....

im gonna leave it there ....  for now 

all coils will be identical other than the unique signiture used for control of payment this will enable the owners of this tower to connect or disconnect at there will.....

i dont like the idea to charge for it but the goves will have it no other way

truley there is no need to make it this way but why not .......   

ist

not to hijack the thred as i usually do lol ....   

but keep this in mind!!!!!!   i have set up links useing this exact gear i speek of over 40km and i have POE...  over 900' 

poe = power over eathernet  this means 0 interferience from any coils and control curcutry ... as well everything needs to be sheilded...

plus you can just burry the ring   underground  so an it is tamper proof 

[MACEDONIA CD]

@sparks

hi man I HAVE JUST HAVE SPARK HERE IN MY TPU>

I THING IS  RF SPARK

[sparks]

  @inno

     Tesla would feed pulse energy into a resonant circuit using his capacitor/coil up in the tower and the Earth as an inductor.  This way the conductor/coil of high selfinductance between the ground and the cap up top would result in a mass elicited gain every time the waves would bounce from the top of the tower to the bottom.  This way he utilized the current lost in a typical resonant circuit to support his standing wave.  So out the top of the tower you have some real high voltage over ground building up.  He needed to run this at high frequency otherwise he would start ionizing the air around the top of the tower and blow the whole block up with a 300foot long lightning bolt.  I think he was operating in the radar spectrum looking at the covers of some of his books.

  Hey Mac how ya doing.   You should see the sparks I got flying in my microwave standing waves burning water.  I gotta get my video up this stuff is fun.

[innovation_station]

awsome sparks...

i designed that system with safety in mind and with out the use of hi  power  there is no need to transmitt high power only the need to recieve high power

any how nuff bout that

here is my 6pac charger unit

ist

[MACEDONIA CD]

HELOO  INOVATION