Steve Marks Device May Be Authentic

[mikestocks2006]

www.magneticenergu.co.uk.   htp://www.americanantigravity.com/ documents/Stan-Deyo-Antigravity-2005.pdf

Freedomfuel, it seems the links do not work?
neither does the one in the first post of this thread.
any other references available?
thx

Hi,

There are typos in both links.  I managed to figure out the first correct link is: http://www.magneticenergy.org.uk/


And regarding the second link, the easiest thing to do is to copy and paste the following filename into www.google.com :                             

Stan-Deyo-Antigravity-2005.pdf   and then you can have it opened then save.

And regarding the link in the very first post, you can read info on it here:
http://peswiki.com/index.php/Directory:Steve_Marks_Toroid_Generator and go down to:
Stefan Hartman Posts Video 
It was uploaded in Oct. 22, 2004 to http://ntint.ntinternals.net/  but this link is down.  Maybe Stefan still has these ZIP files available.

rgds
Gyula

Much appreciate it.
thx

[giantkiller]

To Starcruiser and the rest.
This category is going to grow fast from what I have released here.
Lets say that the clockwise ring goes at 40k, just to piss the FCC off. And the counterclockwise run goes 40k. The interference sweep will be 1:1 and the crossover point will be somewhere on the device.
Now lets crank up the CCW freq to 80k. The sweep ratio is now 1:2 so now there are 2 interference crossovers, 180 across from each other. There is a hidden effect now because if you have 10 lines of flux in each sweep then in each crossover will have 100 internal crossovers in both interference crossovers. And now the device is balanced and the gyroscopic effect should feel pretty strong.
Lets crank the CCW again to 120k. The interfence sweep will be 1:3 and puts us at a interfernce ratio of 1:300 * 120K hz which would be 360,000 harmonic revolutions now. Everything starts to aggresively multiply. The trick is to focus not on the physical revolutions but the power effect of the harmonics. It is really like a 'Butterfly effect'. Small movement magnified beyond extremes.
Now can everbody see how this directly correlates to any of the authentic UFO videos and what the ships do?
Once again. Tesla patented this. He never had any failures, think of that compared to other inventors. Tesla said that 'He dreams this shat up". So don't think any twist of words or logic will get you a patent. If you apply, you will get visitors. Because this application is the only one that doesn't have a follow on product commercially in our lives. Till now.
Back to the crank up. At some point, anomalies will show up. I suspect the order is gyroscopic effect, then levitation, then strange light patterns, then very high speeds.
To navigate horizontally, the harmonics can be shifted everso slightly by either raising the lower freq or lowering the higher freq.
Does everybody see that? Go back and look at some UFO videos again. We are talking very tight frequency control. What else would there be. Also, we are talking extreme overunity. All other attempts are useless.
My next step is to mount the coil to a platform and put in wire connections. I will post documentation also.
My center is iron core which is a 2 section of cut 6 in dia. pipe for like $10.00. You can get it at any metal yard. The wire is 16g dual conductor, 4 x 50'.
I am going to run my first test using my auto ignition wires, cylinders 1,2,3,4. I would really like a help step here. I am thinking of using ignition coils to drive each of the coils on the ring. If anybody has a design for this let me know. It would speed things up.
Like I posted prev that as I make steps I would release. I have kept my word so far. Because when I get to the 'PLAY' stage, this site is going to surpass Google in interest.
Right now I am in a three way, between building, documenting and design. My day job is getting in the way and I have been here all too often. And hey, If it isn't possible then explain the Gyroscopic effect in Steve Mark's coils. I believe that is free, right?

Let's rock! Betcha my ship flies first.
Eventually I'm gonna need very fat copper and a reactor...

[PaulLowrance]

Sounds interesting. I bought all of Al Bielek's audio CD's on the Philadelphia experiment. He describes the secret of time travel is to have a rotating magnetic and electric field inside a gravitational field. The gravity field is vertical, obviously, and the M & E fields are horizontal. A rotating magnetic field by itself has an electric field. At the correct frequency and sufficient power this supposedly causes problems with our space-time.

Regarding your interesting device, I'm wondering how efficient it is to generate a looping magnetic field around a steel toroid. Steel usually peters out within a few KHz.  You know what would be great for this device is a magnetite, Fe3O4, toroid core. This would great for extremely high frequencies. I've always wanted to make my own custom Fe3O4 cores. Anyone have any ideas how to do this? I know Fe3O4 melts just under 1600 C!  So the mold would have to be made of something like ceramic, which typically melts at around 1800 C. That sounds easy enough to get a slap of cheap ceramic and drill and chisel away a toroid or whatever shape you want. Then you could buy a container of powder Fe3O4, which is real cheap. I've bought this at chem. stores real cheap. You pour the Fe3O4 into the ceramic mold. The hardest part is building a high voltage power source that simply touches both sides of the Fe3O4 material in the mold, which causes a small amount of current, at high voltage, to heat up the Fe3O4. Given enough power the Fe3O4 melts. Of course you'll want this entire mold to be inside some type of heat-insulated oven. After you turn off the power source you quickly remove heat probes. You want the Fe3O4 to slowly cool down. Key word is "slowly."

Perhaps an easier method that does not require high voltage is to get a tungsten plate. Somehow you need to plate the entire mold shape with tungsten. The tungsten heats up when you pass current through it, which when hot enough will melt the FeO4.

Presto, you have one awesome nanocrystalline extremely efficient high frequency magnetic toroid or whatever shape you like.

Paul Lowrance

[starcruiser]

  You know what would be great for this device is a magnetite, Fe3O4, toroid core. This would great for extremely high frequencies. I've always wanted to make my own custom Fe3O4 cores. Anyone have any ideas how to do this? I know Fe3O4 melts just under 1600 C!  So the mold would have to be made of something like ceramic, which typically melts at around 1800 C. That sounds easy enough to get a slap of cheap ceramic and drill and chisel away a toroid or whatever shape you want. Then you could buy a container of powder Fe3O4, which is real cheap. I've bought this at chem. stores real cheap. You pour the Fe3O4 into the ceramic mold. The hardest part is building a high voltage power source that simply touches both sides of the Fe3O4 material in the mold, which causes a small amount of current, at high voltage, to heat up the Fe3O4. Given enough power the Fe3O4 melts. Of course you'll want this entire mold to be inside some type of heat-insulated oven. After you turn off the power source you quickly remove heat probes. You want the Fe3O4 to slowly cool down. Key word is "slowly."

Perhaps an easier method that does not require high voltage is to get a tungsten plate. Somehow you need to plate the entire mold shape with tungsten. The tungsten heats up when you pass current through it, which when hot enough will melt the FeO4.

Presto, you have one awesome nanocrystalline extremely efficient high frequency magnetic toroid or whatever shape you like.

Paul Lowrance

Paul,

How about using an expoxy base for the powder and a lined mold to prevent it from sticking?


Carl

[PaulLowrance]

Hi Carl,

That's too easy, lol.  Actually it's fine to add a binder, but it lowers the permeability. I think the reason companies add binders are because they like to add MnZn or Nizn, which are electrically conductive. Also binders strengthen the material since pure magnetite is not as strong as typical ferrite core.

If say pure Fe3O4 has permeability of 25000 then any idea what the perm would be with minimum amount of binder?

Actually, if we're going to add a binder then perhaps highly pure iron power (extremely small particle size) would work. I know extremely pure solid iron has permeability over one million.

Paul Lowrance