Lynnferd Grant HHO Breakthrough

[HeairBear]

So where do you think Stan hid the transducive material? Without a crystal or ceramic material, making a transducer is impossible as far as I know. I have done a great deal of research into ultrasonics and HHO but I couldn't find an inexpensive way to build a stainless steel tubular transducer. I think Lynnferd's experiment is great but I don't think it was the way Stan did it. But hey, I'll keep an open mind over it and see what happens. Go Lynnferd Grant!

Lynnferd, if your reading this, Shoot me a PM here at the forum. I would love to hear more of your thoughts on this topic.

[goldenequity]

Final exerpt... 

"and that was adaquate... 5 watts of ultrasound... shaking that... formed a cloud of gasses
which I presume were hydrogen and oxygen like Meyers was making because I had a similar
2000 volt DC gradient ... which he didn't have DC... he had pulsing DC because he felt that
he had to synchronize the pulses with ... I feel... the cavitation or the plasma pulses of the
smashed little bubble.... and he did not know that.....

I think he may have suffered from.... like all of us who are trying to get something done...you
don't have time to read the literature..and I forgive him for that.. we need to get things done,
we also need to study things.. and so there's a lot of people, hard working, that don't get the
chance to read the literature... but he may not have appreciated sonoluminescence.. which is
a relatively recent thing.. and some of this research came out about the time he died ... about
10 years ago... so he may not have understood the significance of this...

But we should not... we have no excuse! look at this! Sonoluminescence is examples of sonoplasma
state which is highly conductive... and a quick comment here.... you might think of a colloid..which
is a tiny little metal particle... which can be suspended by Brownian movement in a liquid as being
like an inter electrode.... the difference is, yes there is hydrogen and oxygen forming on this tiny
little speck of a colloid.. metal colloid... but notice... it is not immediately vaporizing as the plasma
bubble is.. it is staying there long enough that it will simply spin... the hydrogen on one side of the
inter electrode .. this microscopic little nano particle of a colloid.. it will immediately turn and act
like a water fuel cell in the classical, old fashion, scientific meaning of a "fuel cell".... and when you
put hydrogen and oxygen in a fuel cell... you have a battery.... that's what the standard hydrogen
fuel cell has meant.

Well this tiny little particle simply spins around and becomes a battery, in effect, and shunts out
the electrical field and behaves like an ion in your (water) bath... this is very common for people
like me who make colloidal silver... you have silver electrodes to form electrolysis... and the tiny little
pieces of silver are shocked apart by erosion of the electrodes due to electron cluster.. you read up
on that.. yes electrons cluster... they form minute craters... you look at it under a microscope and
they look like a meteor hitting the electrode... and they splatter out molten metal.. and that is the
source of your silver colloid... or copper colloid... or platinum colloid... or any other colloid... but
platinum apparently absorbs the splatter... and that's why you have platinum spark plugs.

If you're following me.... these tiny little specks are very common... in any electrolysis cell... it should
be acting as an inter electrode ... and forming your hydrogen on one side of the tiny little metal and
oxygen on the other."

whew.... 

[goldenequity]

Thanks Luc..... I decided to treat this as a "news" reporter and dig out stuff and just report.
I'll let you guys do the commentary and theorizing.
My motto is.... you never know, until you find out.... so here's some more stuff I found:

These are 2 friends, Thomas and Lynnferd,
that worked together and performed this at 3:45am on Wednesday or Thursday this past week,
and then announced this to a Yahoo group... and then to James Robey / Water Fuel Museum.
Here are some extractions from the yahoo thread:

1) We used a 2100 V Microwave output from the Capacitor (DC current)
2) We used a Ultra-Sonic Jewelery cleaner
3) We used a plain plastic cup about 7 inches tall
4) We used Distilled water
5) We used one paper clip to be used as one of the electrodes but in series with a 100 watt bulb to not short out the microwave which acts
like a fuse in line
6) We used on the other electrode a stainless steel spoon that is about 3 to 4 inches apart from the paper clip
7) Make sure you put a bowl of water into the microwave before turning it on so it will not ruin the microwave
Make sure you put your ultra-sonic jewelery cleaner under neath your 7 inch plastic cup but have some water in the ultra-sonic cleaner too
9) before you turn on your microwave to make sure that your 100 watt light bulb is turned on before you put the lines in series with one of the outputs of the microwave capacitor
10) DO NOT TOUCH THE LIGHT BULB LAMP OR THE WIRES THAT ARE HOOKED UP TO THE ELECTRODES WHEN YOU TURN IT ON AT ALL OR YOU WILL GET A SHOOK THAT MIGHT KILL YOU !!!
11) after you have done all of this then you can turn on the microwave
12) about one minute into the processes then you turn on your ultra-sonic jewelery cleaner on high speed
13) about around 5 minutes to make sure you shut it down so the hydrogen will not accidentally explode or have it explode and kill you !!!
----------------------------------------------
I AM SENDING JAMES ROBEY OF WATERMUSEUM SO HE CAN
PUT IT ON YOUTUBE.COM FOR US SO THERE WILL BE A DISCLAIMER ADDED TO
IT SO NO ONE WILL SUE US IS WHY I DID NOT WANT IT ON YOUTUBE YET !!!

SO IT DOES WORK BUT WILL BE PUT ON WWW.YOUTUBE.COM MAYBE NEXT WEEK
SOME TIME GUYS AND WHEN IT DOES GET ON THERE THAT JAMES ROBEY WILL
PUT A LINK HERE FOR YOU GUYS TO LOOK AT IT THEN BUT NOT UNTIL THEN

THOMAS
------------------
Hello Sir. I will be placing this video on youtube next week so there
will be a disclaimer with the video so no one will come back to sue us
for not having it in the video ok but its for real and can be done just
by making the constant ultra sonic frequency by using a ultra sonic
Blitz machine that you can buy at the JCPennys store near you so if you
do this experiment to make sure you do not touch the 2100 V from the
microwave or you will get electrocuted and possibly die from it !!!!
Me and Lynnferd will be doing some more experiments next week with
other things in the Distilled water but also remember you do not have
to have plates in the water to get the same results that we got and
also they can be far apart but also we used just a big paper clip on
one side of the plastic cup and a stainless spoon on the other
electrode which both were 3 inches away from each other in our video it
shows all of this to work !!!
------------------------
The constant of using the Blitz Ultra Sonic Jewelery cleaner at the
higher speeds this machine only has off, slow speed, fast speed and
you can buy one at JCPenny's store where we bought it at so you can
try to use the slow speed but it might not work as well as the faster
speed when all we used was a paper clip at one end electrode and the
other electrode a stainless steel spoon which was 3 inches apart from
each other so its going to be very interesting to find out with using
plates at a closer distance when I do not think that the distance
matters but me and lynnferd will be doing some tests ourselves next
week on this so we can show the outcome of the experiment of this so
be tune for the results !!

I bought some stainless steel spatulas at a close store to do some
more tests with this
--------------------------
Hello guys. I will be putting this video on youtube.com but next week
because so there will be a disclaimer on the video so no one will come
back to sue me or lynnferd is the reason why we haven't done it yet but
will send it to someone to edit the video and put it on youtube so be
patient with me on this thanks !! THIS WORKS JUST WITH ONE ELECTRODE
AS A PAPER CLIP AND THE OTHER ELECTRODE WHICH WAS 3 INCHES APART A
STAINLESS STEEL SPOON !!!

IF YOU DO THIS EXPERIMENT TO MAKE SURE YOU DO NOT TOUCH THE 2100 V FROM
THE MICROWAVE WIRES AT ALL AND THE WATER TOO WHEN YOU TURN ON THE
MICROWAVE AT ALL BECAUSE IF YOU DO THEN YOU MIGHT DIE FROM THE 2100
V !!! THIS IS A DISCLAIMER AND A WARNING TO ALL WHO READS THIS SO YOU
ARE WARNED !!!

THOMAS
----------------------------

[Dave45]

Has anyone replicated this yet, is it hho or ?
Dave

[Kator01]

Folks,

I have to warn you about the way this guy was performing this experiment :

2000 Volt at 60 or 50 Cycles/sec in a small glass with spoons ( ! )  is an absolute nogo for unexperienced persons.
When you open the microwave-ofen and touch the capacitor you will be dead for sure because it holds more than 2000 Volts.

I strongly suggest to do this experiment with new designed neon-transformers. They operate at 28 KHz. Here you will get 4000 Volt but the difference is you might "only" burn your fingers badly.

Hight voltage at grid-frequency is a very deangerous thing.

I do not understand that this suggestion is made to the public at all - without any stern  warning about the danger involved.

Also this transformer has a power of 500 Watt at least and what I can understand from his description is that he´s just got a few tiny bubbles - at what input-current ?

Regrads

Kator01