Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Cavitation. The key to overunity?

Started by Pirate88179, November 29, 2008, 10:50:09 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

spinner

 ???
Quote from: TheBuzz on December 23, 2008, 10:02:19 AM
Nature is what lead me to it Ramset. I know that nature is simple and repeats itself from the smallest to the largest. So I spread out every free energy patent I had collected over decades on the floor and started walking around looking for a pattern. Cavitation is the pattern I found.
So, cavitation is the answer to  any FE patent/device? OK...
Quote
Nature only knows one method to convert energy into mass and to convert mass back into energy from what I can determine.
If you think about Einstein's famous formula - there are a few mechanism allowing to convert mass to energy. Care to name one technically viable which does the opposite? (energy to mass conversion).
It shouldn't be difficult... m=E/c2.
Quote
I don't know every detail of every free energy device but once the basic principle is known, people can find the different methods used to accomplish it.
Placing three coils or inductors in series is one method. The phase change makes the third coil no longer able to see the first. The inductors do not collapse at the same time and so an electromagnetic cavitation takes place. Thane Heins toroid is using this method, Hubbard, Cook, probably the magnifier, etc.
This is a novel electrotechnics. Electromagnetic cavitation?  ROTFLMAO! ;D
Quote
Pulse a gas under a vacuum with high voltage and electrons are removed from the gas when it transmutes is another method used in many devices such as the Methernitha, Papp engine, probably Meyer, etc. I feel this one could be dangerous - don't play with it unless you are well trained.
Methernitha community? Papp noble gas engine? Meyer OU electrolysis?
Do you people ever check a certified history behind all those fascinating claims? Or, your 'knowledge' is mostly based on an articles coming from a different "fringe science" sites?
Why there is no replications? Why science community neglects all those revolutionary achievements?
Ah, the conspiracy... I got it.
Quote
Cavitate a fluid and some of the fluid is converted into atomic energy contained in the fluid such as the Clem engine and others.

What all the devices have in common is they produce acceleration which is a result of cavitation.
Gee.  You've just made the cavitation phenomenon more important (and fancy) than, e.g., radiation. Congrats!
Quote
This is what all free energy device have in common and is what I have been saying for a year now on several different web sites. At first I hinted at the connection and I was ignored. I wanted someone else to figure it out and release the information. Later I started spelling it out in black and white and I was attacked for it. That is confirmation from the spook community that occupy and run many of these sites.
WHICH FE DEVICES??? THIS IS JUST YOUR FANTASY! YOU'VE POSTULATED YOUR OWN THEORY, FOR A NON EXISTENT THINGS!!
Btw, who are the spooks?
Quote
What never happened in all that time, with hundreds of posts, is not one person ever pointed at a validated free energy device that proved my theory wrong.
There are no FE devices (yet), ergo "your" theory is a fiction.
As long as your theory is dealing with a fictional devices, don't expect a great interest and valid answers...
Quote
Many books have been written on the subject and not one of those books ever showed anybody how to invent a free energy device and the real principle that makes them work. If they did, free energy devices would be everywhere.

I didn't need to invent a device to prove the theory, plenty of people already did. What the inventors didn't do is either understand or explain how the device worked so they could be easily replicated.
:o
Quote
The moment you invent a device and publicly prove it, you are going to get placed under an illegal secrecy order to protect the oil companies and Jewish central bankers that control the money rackets across the earth. You lose the device and the rights to it.

You must find a qualified patent attorney and still the corrupt government is not going to allow you to sell it.

I feel the best way is to produce a set on instructions so detailed and complete that anyone can follow it. Then thousands of people will be able to overwhelm the corporate ignorance and mind control embedded in academic science to prevent people from freeing themselves from that tyranny and destroying their careers if they do.

It all begins with a thought, everything does. This is the reason thought integrity is so important. Good examples of the insanity that results from a lack of thought integrity such as projection are all around you. Stick to the truth of the science and ignore the crazies and you shall know the truth and the truth shall set you free.
Forget about conspiracies, etc.
Who would prevent you of using the FE device for yourself? Or, publish it on a net worldwide in a "blitzkrieg" fashion?

Excuses, excuses....
"Ex nihilo nihil"

Grumpy

Quote from: TheBuzz on December 23, 2008, 12:10:17 PM
A "spinner" is a type of sail - yet another nautical term... It just has to be US naval intelligence, an oxymoron if there ever was one. Notice how they travel and post in a pack?

You're right Grumpy, they are amateurs in every sense of the word but before they lose their contracts, let us have our fun with them? I'll have to share a funny NIS story with you privately some time. This wouldn't be the first time I had a laugh at their expense.

"Sloop" was probably already taken, as was "Junk".

You know, the "other guys" are much better.  They are quite successful at infiltrating public and private forums with ease - never even a hint of their true identities.  No reason for a visit unless you got the goods and prove it - This is why they always pressure you to "prove it".

Now that one is ineffective, another steps in.  He was obviously not informed that the "conservation law" does not apply here since we have not requirement for net charges.

Hmm.  I'm not banned yet - I must be doing something wrong...  ROFLMAO!!!

It is the men of insight and the men of unobstructed vision of every generation who are able to lead us through the quagmire of a in-a-rut thinking. It is the men of imagination who are able to see relationships which escape the casual observer. It remains for the men of intuition to seek answers while others avoid even the question.
                                                                                                                                    -Frank Edwards

Freezer

Awesome lecture by stan meyer, if you haven't seen it already.  This guy is/was brilliant..
http://www.youtube.com/watch?v=JyqQ-jXePO0&feature=channel_page

Grumpy

Quote from: TheBuzz on December 23, 2008, 02:38:12 PM
You nailed it Grumpy. They can't step in without proof that you have the goods and is why they try to bully people into posting pictures of a device. That and they can learn about you from what else is in the picture, especially if you bought the camera with a credit card since they encode the camera info. into the picture.

I don't have to build a device, so many others have. :-)

Hey grumpy, ever noticed that the tube on top the Methernitha Swiss ML has a pick up coil wound of loose steel inside and then it is surrounded by a thick tube?

People say that is a valve tube but I find that unlikely since the diodes can be clearly seen on the sides of the center post.

The inner tube has a gas in it under vacuum - there is your acceleration. The thick tube surrounding it is to shield the radiation.

Also, if you find the right photo, you can see the U shaped magnets are wired together at the top which splits magnetically the electron stream. Again a cavitation and we call that form of cavitation Aharonov Bohm effect.

Ever notice how on the smaller older units there is that bar magnet with a bunch of winding on the end? - Same thing - splitting an electron stream.

The Swiss ML appears to use two cavitation (acceleration) techniques.

Funny thing is, for 100K (after taxes) I would have just shut up and taken up golf as plainly stated on other web sites. Instead, they spend a small fortune on amateur Mossad and NIS spooks that can't keep a cover even while hiding behind a computer. Please stop wasting our tax dollars?

The few pictures that I post are heavily reduced - I doubt much is left to help anyone.  I don't post vids.

On the Testatika, they found it could not be stepped up to (I think) 20 Kw.  This made me suspect that  some sort of assisting material (as in active) is used.

don;t settle for a measly 100k - maybe 100k a year, but not a one-time payment.  I think they have a policy to not offer payments these days, as someone else comes up with it and they would have to pay everyone and that would get expensive and also is harder to cover.   Fear is cheap and since they have the goods themselves, they don't need anyone around to either spoil it or explain it.  Do you ever hear of people with the goods being "recruited" - not at all.  Ain't gonna happen unless they need you.

AB effect also has "potential" as the cause for the cavitation or is is the potential that is cavitating?   See all of the hoopla over that?  Even scientist have to put up with the crap slinging.

Here is a bone for the spooks - just not right to have them read all of this stuff and not have anything to add to the report:

Steel wire is also a collector or converter of cavitation energy - depending on how you look at it.  Not the same as copper, a bit different form of conversion going on.
It is the men of insight and the men of unobstructed vision of every generation who are able to lead us through the quagmire of a in-a-rut thinking. It is the men of imagination who are able to see relationships which escape the casual observer. It remains for the men of intuition to seek answers while others avoid even the question.
                                                                                                                                    -Frank Edwards

AbbaRue

@TheBuzz
When You mentioned 3 coils connected in series I immediately thought of the following article:

Posted on page #1 of the   Single circuits generate nuclear reactions   thread.

2) A magnetic version of the before mentioned discharge device I build using the know nuclear magnetic resonance phenomena, all atoms have a nuclear precesion known as the Larmor precesion frequency, his value for a magnetic field of 0,5 Teslas is about 21 MHz, this suggest than if we create a magnetic circuit tuned to this frequency by the quantum relation E = h * f , the nucleons proton-neutron area break and there is a nuclear desintegration and energy liberation

I test a common iron rod and place 3 coils, one for the polarization field of 0,5 Teslas, another for generate the resonance at 21 MHz and a third for get de power, in my firsts tests I get about 10 KW with the starting polarization and oscillator using less than 100 watts, and autopowered devices to 220 VAC, 50 Hz and 110 VAC, 60 Hz, I see the frequency output is the tuning difference between the resonance Larmor frequency and the external oscillator, thats say if the nuclear resonance is in 21 MHz and the oscillator was at 21,001 MHz the output power frequency is in 1 KHz , I see in this magnetic circuit there is a desintegration of the Fe atom in a isotope for a delay of time for reciver his initial state
This method is used in medicine but not used for energy generation and too many more single than the here shown system use Uranium , this is an ecologyc device and low cost in comparation to that, I wait upload this to the before web site I mentioned

This circuit is clearly a cavitation device using 3 coils.