ENERGY AMPLIFICATION

[Leely]

@Reiyuki. Tito's device and what you brought up here are not the same.

[Leely]

I've dismantled my replication because it was not cost effective compared to solar panels.
Also I was concerned at the heavy "breathing of the car batteries when I upped the power draw to 300 watts.
I ran the device for a week with manual switching, always drawing 11 watts mains light and occasionally powering a 300 watt motor generator setup and occasionally powering a 12 volt car electric kettle. After a week the battery voltages were the same as at the start.
The key is what  Benitez says.  He is very clear.
I used 2 car batteries and two HGV batteries in my setup. I used a 20 watt 1:1 trafo and a motorized Tesla switch for the interrupter.  The cap was a tiny 6kv cap.The circuit is the simplified one in Patrick kelly's book. I told him about my replication and he published the Benitez stuff. You need a big trafo or it won't work. Maybe a microwave oven trafo will work. You won't get a simulator to work because they can't simulate a spark gap or Tesla switch.

This is why I don't like Benitez patents, it needs so much batteries. But how many trafos did u use? Why I like it is because it is a kind of replication to Tesla switch.

[Reiyuki]

@Reiyuki. Tito's device and what you brought up here are not the same.

Completely agree.  However, I now believe the principle of operation is the same (different reference frames generating voltage).

  I think energy is extracted in the same way, but the driving methods are different.  In a Faraday generator, velocity distorts one reference frame.  Perpendular to a B field this creates voltage with a current that's limited only to the resistance of your circuit.

  (Possibly) T's circuits create a distorted reference frame with opposing magnetic fields against a 90deg B field.

[Tito L. Oracion]

I think i'm paid already


and here is my bonus payment, whether you get it or not so be it.


free energy could get freely from nature all we need is to tap.


lets say for example when there is a twin tornado, those are very strong, what we only need is just a part of that energy. so we just make a tapping but in this design we really need a good spark gap from the atmosphere going to the ground.


That's it so be it.


And GOODBYE!!!


YOU @#$@#$@#$@#$%$#%#$%

[Bob Smith]

For what it's worth, folks:

Ive noticed that every single "free energy" device embodies the same device at heart. They all need Hv pulsed dc, tesla coil, choke coil, some sort of resistance and some sort of capacitor. In every single device. Look at all of them one by one and look at how they really work. it all comes back to the same, for example the joule thiefs can be made using just a transistor and a bi filer toroid and aa battery. In this case the coil fills in more then one use, it is the coil, the resistance, and the capacitor. When you make larger devices the coils can no longer fill these places entirely so to resonate the way you want you have to add choke or resistor and capacitors.

With this knowledge getting coils in "resonance" is much easier to understand.
Once you understand the concepts from Tesla you can build much better versions from modern day parts. Source: http://www.energeticforum.com/renewable-energy/5096-no-electrolysis-water-split.html#post213110

I don't think this person's version (HV pulsed DC) is the only way, but thought I'd pass it along.
Bob