ENERGY AMPLIFICATION

[smoky]

Hi Erfinder,
What Lester Hendershot  did with one of his early designs was to[/size]

Take a thin metal plate and pivot it between 2 equal strength Nth Sth permanent magnetic poles.
He wound the thin plate with fine wire like Litz wire and connected it to an aerial.


Weak signals coming down the aerial wire mixed (heterodyned in some manner) to produce difference frequencies in the audio range.
These audio signals were low enough in frequency to pass through the Litz wire coil.
Causing the plate to become an electromagnet attracting it alternately toward one magnet face and then the other.


The original minute change of aerial signal flux on the plate was greatly amplified by the electromagnetic plate physically approaching either magnet's pole face.


I guess it could be termed a "tipping threshold or avalanche" effect much like onset of negative resistance in a spark gap and other phenomena with tipping points.


The extra energy was supplied by nature in each magnets flux density as it didn't need to be supplied by external current or voltage sources.

[Dave45]

.

[Dave45]

.

[Dave45]

.

[Dave45]

.