ENERGY AMPLIFICATION

[Leely]

Tito, what kind of transformer is your device made up of? Is it made of
1. Straight transformer, or an EI transformer?
2. Ferrite core, iron core, or air core?

[lancaIV]

ENERGY AMPLIFIKATION = ENERGY MODULATION


Tito,what "kind" of transformer is your device ?


An Auto-Transformer ? Seriell-/Parallel-Couple with feedback ?


                     Avramenko-loop  ?


Sincerely
               CdL


The Gift: Radio Macau http://www.youtube.com/watch?v=9gQu04ib7Y8

[Leely]

I'll replicate this in due time. I'm still working with the switching methods. I actually dismantled my first switch. And time, oh.

[Dave45]

Iv been playing with this circuit a little, its a very interesting and simple but the sims have a hard time with it, a couple of people have got it to run in a sim but showing only conventional view + to - it would be very interesting to see it in electron flow - to +
What would you say is triggering the mosfet gate, I believe D1 and D2 are the trigger but is it bemf that triggers the gates or femf.
It will pulse two primary's from the center out and from the outside in but will not oscillate if one is reversed, its interesting if you use cw and ccw coils you are pulsing the primary's but the polarity does not change only the bemf collapsing into the coil changes the core direction, If all bemf were stopped from interring the primary's this would operate like a flywheel,,,,,,, you know ring magnets will only fit one inside the other if their polarity's are nsnsns.

[totoalas]

Iv been playing with this circuit a little, its a very interesting and simple but the sims have a hard time with it, a couple of people have got it to run in a sim but showing only conventional view + to - it would be very interesting to see it in electron flow - to +
What would you say is triggering the mosfet gate, I believe D1 and D2 are the trigger but is it bemf that triggers the gates or femf.
It will pulse two primary's from the center out and from the outside in but will not oscillate if one is reversed, its interesting if you use cw and ccw coils you are pulsing the primary's but the polarity does not change only the bemf collapsing into the coil changes the core direction, If all bemf were stopped from interring the primary's this would operate like a flywheel,,,,,,, you know ring magnets will only fit one inside the other if their polarity's are nsnsns.

if you pulse both primaries at the same time as ive done  you can see the kick kick bak back  result    cheers