Howard Johnson Replication Tube Claim

[nyctuber]

Very convenient how Mylow will only let Sterling (or his cronies) view this. 

Does Sterling have anything to gain by saying, "Yes this is a working magnetic motor, I have seen it"?

Ultimately, no, unless someone can reproduce the device. And it's worth pointing out that Sterling travels on his own dime, and sends Mylow magnets etc on his own dime. Whatever he's made off selling plans for the motor has definitely more than been spent on magnets etc.

[joe_1001101]

thinking.

[AnandAadhar]

Sorry, I've gotten a little behind in reporting on my recent correspondence with Mylow.

There are some very great developments afoot.

Today he opened his box of magnets that I had shipped to him -- two complete rotor-stator sets; one of alnico, and one of ceramic.

He said the alnico channel magnets for the rotor are "exactly like what he had before -- same size and shape"

He was very excited to get them on the rotor disc and get them running.

What's even better is that the supplier, AllMagnetics.com (ask for Felix, mention promotion code "PES") has 700 of these in stock, with 1000 more on their way in a month.  (Part number listed in the email  below.)

And Mylow is now willing to let some of our guys in to witness.  This is all likely to happen today/tomorrow.

Eddie Sines (http://www.potomacenergyprojects.com), PMMTester and LightRider are on notice to jump in cars / on planes to come in.  I'm in the SLC airport set to fly out in 45 minutes to Estonia, so I'll not be able to go this time; but I have confidence in the three that are planning on going.  LightRidder will be travelling 1400 miles from Canada to attend.

A quick note: Eddie, who will be the public face on the camera (the other two guys wish to preserve their anonymity), will need some help reimburse his plane ticket, if some of you who have offered could come through for him.  He's willing to cover $200 of his ~$600 round trip cost.  PES is bled dry right now, but I expect that with validation that the sales of plans will go up substantially, enabling us to reimburse his travel.  http://mylowplans.com

In other news, Mylow told me that he had his new configuration running as well (I didn't get a chance to ask him exactly what he meant by that).  But he said it had a lot of up and down vibrations. 

A couple of days ago he told me that he did a run-down test with this bar magnet configuration, and that without any magnets on the stator, the run-down time was around a minute, but with the magnets on, it was more than five minutes.

I saw a similar effect when I was playing with his version 1.2 configuration.  With the stator magnet moved far away, the run-down time was around 53 seconds from 50 rpm to zero.  But with a certain configuration, the run-down time was around 75 seconds.

In the last few days, Mylow seems in very good spirits, glad to be doing what he's doing and confident that good things are unfolding.

He's a hero, in my opinion.

I'm very much looking forward to these unfoldings.

While I'll have limited phone availability in the next few days, I will have internet, and can check my phone messages.  PMMTester and others know my Skype username.  I prefer to not give it out publicly.

Onward, and upward.

History in the making.

Sterling D. Allan, CEO
| New Energy Congress: http://newenergycongress.org
| (Pure Energy Systems) PES Network, Inc.: http://peswiki.com
| http://energystork.com - newfangled products
|
| Profile: http://sterlingdallan.com
| Daily news by email:
| http://www.freeenergynews.com/newsletters
|
| Phone: +1-801-407-1292 (mountain time)
| Fax: +1-801-880-8322
| Eagle Mountain, Utah, USA




----- Original Message -----
From: "Sterling D. Allan" <sterlingda@pureenergysystems.com>
To: "felix" <felix@allmagnetics.com>
Sent: Monday, April 13, 2009 1:34 PM
Subject: Re: Your Order


Hi Felix,

I'd like to modify this, if it's not too late.

I want the following sent VIA UPS NEXT DAY to:
[Mylow]

64 pcs. GALNCH use P/N HS253875 .
2 pcs. HS811N @ $10.00/pc. (not in stock, ship 07270 ...)
1 Magnetizer for Alnico Horseshoes (no charge "lend it")
2 pcs.  CB60134 @....
64 pcs. CB-1434 @ ...
[...]

Thanks

| Sterling D. Allan, CEO
| New Energy Congress: http://newenergycongress.org
| (Pure Energy Systems) PES Network, Inc.: http://peswiki.com
| http://energystork.com - newfangled products
|
| Profile: http://sterlingdallan.com
| Daily news by email:
| http://www.freeenergynews.com/newsletters
|
| Phone: +1-801-407-1292 (mountain time)
| Fax: +1-801-880-8322
| Eagle Mountain, Utah, USA

Thanks Sterling for all your sincere efforts. You're the best for all of us under scrutiny. I would be very glad to be proven wrong by you in this case. My dream is also that magnetic overunity can be proven this simple. It would be the crown on my work.

[hansvonlieven]

@ Sterling:

Be prepared that when you, or one of your representatives, (only one allowed now) arrive at Mylow's it will be just after another tiff with his wife and she will have "destroyed" this motor with her broom also.  Can't blame her really, it is only the biggest news story since the printing press and she can't stand it being in her home.  Wake up Sterling, I know you are better than this.

Bill

Not a bad projection Bill,

though I think, personally, all by myself, without assistance from the government or the Pope, the MIB will turn up and can the whole project. 

Hans von Lieven

[wattsup]

Yes it is still moderated although I do like spending most of my time on projects (Mylow, TPU and more) then worrying about people that should already know how to conduct themselves in a public forum. Just keep it clean and respectful, no pot shots. I have not gone through the whole thread to do some clean up. What's the point, but thus far things read OK so keep it up guys. There's no shame in having a clean discourse.

Regarding @Sterlingas' post, I have not been able to get any specs on the magnet models he mentioned, like pull specs, dimensions, etc And what is the M646, there is nothing on the web on that magnet.

As far as helping out with finances, my help budget was sort of depleted when we all helped JackH (pretty sizable) with his patent expenses and we have not heard from him for a long while. So I am kind of dry in that department. But guys here should be able to pool "some" resources. That is if it is still required since now it is said that Mylow will only accept one witness. One is better then none.

OK, back to my own tests. lol