The Master Of Magnetics "Steven Mark"

[Mannix]

Freedom fuel,

Thank you for your insights.


First of all the sebcar.
I did not discover any overunity as such in the sebcar...but.

One of the effects was that many people had trouble with the adjustment pot smoking up!

This could possibly have been external.

The sebcar was a fun project that was a bit outside the box so to speak.
Perhaps using the sebcar system with air turbine coils could be fun to?
another project that looked interesting was the tep project at jlnaudins site.

Just going thru what steven had told me

I do suggest that people who are not familiar with rf and the burns that can be had do not mess with this.

The coils get hot. THis problem has not been resolved. It apparently due to the windings moving.

Think of the ouput as dc (pulsed)5khz with lots of Hash in it.

When it is unloaded the voltage climbs substantially and I do not mean a spike. it lasts for several seconds and is a good third higher.
Steven calls it the turbine effect.

The large coils have control units (as seen) the small coils have the control unit mounted on the inside edge of the coil and they do have to be inside the coil.
Here is something interesting from Steven.



It has been a very long road from beginning to end. It took several years of experimentation to discover what frequencies and most importantly how to make small integrated circuits work to perform the control functions necessary to make the demonstrations you see on the video tapes available today.
So in many ways we have early RCA color TV engineers to thank for my discovery of the power generator. I am sure they are all dead now but they did contribute.
Perhaps a story which had impact on me at that time was told to me by my boss way back in 1970 I believe it was.
He told me that around 1965 or 66 there was an explosion in an apartment in Chicago. the authorities had concluded that for some unknown reason, a General Electric color television receiver had been the source of an explosion that killed a young black child in the apartment. My boss went on to relate that he was involved in the investigation because he was in Chicago at the time and he was  invaluably experienced with television circuits and etc.
He told us that what they found was, the TV had exploded with some quick furry. The explosion did in fact kill the poor child who was sitting directly in front but sparred his mother who was some distance away in the kitchen.
The explosion was strange because of the absence of expected chemicals necessary to create the explosion. It appeared that the TV was the exact center of the explosion, however no one could find a reason for the explosion occurring. Also consider that there is not really much inside a TV to explode with enough force to kill people and destroy the living room a large apartment. Yes a CRT can explode and kill someone, however this was not the kind of explosion we are talking about. The most interesting part of the story is that according to our boss, metallic objects especially those containing large amounts of iron were dramatically displaced. He mentioned that some nails were actually removed from the walls and pulled toward the TV set. When they found them they were bent and shaped like cork screws! Everything in the room appeared to have moved or was moving toward the TV as it exploded, or imploded as the case may be. The child was apparently killed by way of these metallic objects traveling through his body on their way toward the center of the TV set.
As far as  my boss knew,  there was never a good explanation for the occurrence. We found out that this was not the only unexplained explosion of TV sets worldwide. However, the fact that all the sets exploded while in operation may bear some light. Also most of the TV sets were made by the GE company or were TV sets made using GE circuits and of similar design.
However, this man who had been my mentor for so many years had his own theory which he never told anyone as far as i know, except me. His theory was that the TV while in operation, somehow managed to become a receiver of more then just television waves and so for a millisecond in time became a receiver and the discharger of a huge amount of electrical and magnetic energy. This discharge of magnetic energy is vary similar to the discharge of magnetic energy during an atomic explosion. . . Now that is something I have thought about a great deal.
My employer's words had great impact on me. Not that they meant anything really, but I kept thinking about the possibility of many frequencies combining at one moment in time to produce an entirely different effect then intended by the designers. And so it goes. Some of the reasons why I thought about things the way I did and perhaps why I set out to think along the lines I did when I discovered the power generator technology. Or more appropriately, the power converter technology, because that is actually what it does you know.
Sincerely,
SM





Thats about all I have for now.

As long as this stays relevant and in Stevens interest I will continue to post.

There is something that I must add here. Steven has had no convictions of any kind..search the net for effects
search for blowing up tv sets find a clue to unusual effects.



I do wonder why people chose not to use their actual names.


Sincerely

Lindsay Mannix

[hartiberlin]

Hmm, very strange this "magnetically-imploding" tv set...
Well, if indeed nails were removed from the wall and were accelerated into the direction
of the TV-set, then the magnetic flux density must
have reached at least 100 Tesla or more ! I can?t imagine, how this could have happened
just in a old TV-set. There must have been forces at work, which have not been
created by the normal 60 AC supply.
Such forces would have needed at least a few 100 KWatts of power to generate
just a huge magnetic field. The fuse of the appartment would have been
blown, if this power would have been drawn from the grid socket...
A loose transformer contact in the TV set could have caused just a burnup
of some components, but not such a Mega-Watts requirement magnetic field !
Hmm, indeed, very strange...

[hartiberlin]

http://harti.com/coil/toroid_gen.gif

This is the mentioned animated GIF pic of a toroidal core being powered
by a DC supply and changing the taps where the power supply is applied.

Remember, that the 2 partial-coils are in repelling mode, so the magnet fields
wil move out of the core inside the center.

This same configuration can be got, if you use 2 pairs of coils ( 4 coils all in all) located
90 degrees apart
on a toroidal core and control them with a 90 degrees phase shifted sine generator.
This way you can avoid any mechanical switching and also get the same rotating field.

Now I read, that the control circuit must be inside the big coils in the bigger units and
that the bigger units only contained cork and wires.... Now the question is,
how is the big outer coil wounded ? Is it wounded around its axis or is it wound like a toroidal
transfomer ? Are there many coils around the cork core or just one or 2  or 4 ?

If it is a selfrunning system as it appears to be, there must be some kind
of feedback loops, so the system can oscillate up and feed itsself.

But the small 2 toroidal coils ontop of this plastic box, can they generate such a big field,
that the outer big coil on the cork toroidal core can have enough induction
to generate a feedback loop ?
It is a pretty huge airgap so to say...

Hmm, we really need more info before we can try to setup an experiment
to prove any effects...

Regards, Stefan.

[hartiberlin]

Who is Klaus Rassbach ?
I don?t know him...

Lebt Klaus Rassbach noch,Herr Stefan Hartmann ?
Addresse:Berlin

Hoeflichst und mit aller gebietenden Hochachtung
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?de Lanca

p.s.:Hanna Albert Awad,irgendwo im Libannon(Ajaltoun,Kerouan),
mindestens ein Anruf wert

[Elvis Oswald]

These latest comments about inspiration for the device are interesting.  Even more so considering that Tesla worked for RCA in the early years of TV.  It is said he worked under a different name... and I have no confirmation of the one source... but interesting.

About the TV exploding... I wonder what kind of antenna setup they had on it.  Back in the day, it was not uncommon to use rabbit ears with aluminum foil sheets connected to the ears.  I'm sure people used all sorts of metal and the like.
It's possible that a set of power amplified rabbit ears got screwy and electronically enlarged the antenna to such a size that it was able to draw a greater source of energy than regular broadcast waves.

If you like that theory... let's talk about how Bushwacker's HOPE might work.