IST SHIFT COIL

[innovation_station]

WHAT I BELEAVE TO HAPPEN IN THIS UNIT AS SHOWEN WHEN THE PRIMARY IS

POWERED AND INTRURPTED AT ITS NATURAL RUNNING FREQ.. 

THE KICK WILL BE FORCED BACK INTO THE DRIVEING CAP CHARGEING HIGHER IN VOLTAGE...

THUSS RUNNING WITH GAIN ...

SO THE FOLOWING DUMP WILL BE OF MUCH HIGHER VOLTAGE..   

TO THE PRIMARY AND IF THE CHOKE COIL IS NOT ENOUGH RESISTANCE USE A RELAY COIL ....



IST

To understand the action of the local condenser E in fig.2 let a single discharge be first considered. the discharge has 2 paths offered~~ one to the condenser E the other through the part L of the working circuit C. The part L  however  by virtue of its self induction  offers a strong opposition to such a sudden discharge  wile the condenser on the other hand offers no such opposition ......TESLA..

[jeanna]

Have you found its natural running frequency?

I am winding a very big core today. It may be the same size as yours. Its frequency is naturally a lot slower. I expected this, but it is a lot. (17KHz at 1000 ohm base resistance) .  I hope I can get enough voltage from 240 turns to keep the voltage high enough when I up the base resistor to raise the frequency.
I like the plan to snap the cap at the rate of the MK2 pulses. Good idea.

jeanna

[innovation_station]

TY JEANNA

BUT I DONT WANT A RESISTOR ON IT I DONT THINK ....  NATURAL .... 





THE CHOKE DETURMAINS HOW MUCH IT USES ...  ADD MORE AS YOU SEE FIT ... THIS IS 1 TO 1

IT SHOULD BE OR IT COULD BE ...   LOL   369


OR 1 2 3 IF YOU LIKE X THE MASS OF THE PRIMARY ...

IST!

OR YOU COULD GO 3 6 9 X THE LENGTH AS LONG AS THE GAGE IS THE SAME ...

IF I DO PUT A RESISTOR I WILL USE SOMETHING LIKE 1 OHM 5 WAT OR SO TO PORTECT THE TRANSISTOR ..

[innovation_station]

 FOR THOSE THAT FIND AN INTREST IN MY COILS HERE ARE THE DETAILS...

50" 14 GA 10 T P 24.5 G AND 265 T 28 GA 24.5 G 180 DEG OF SEPERATION

STANDARD MK2 LITZ WIRE PICKUPS...

IST UNPLUGGED ...

[jeanna]

The resistor I refer to is in the MK2 first coil set up as a joule thief.

Then it is collected in a cap then the cap discharges into the one you have there and that discharge is the frequency that has no resistor.

Did I get that right?

jeanna