Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

[Ghazanfar_Ali]

@Broli
C1 I used is non polar. 18uF IPC-7351 Tantalum
C2 is 47mF electrolytic cap. 50V

[broli]

@Broli
C1 I used is non polar. 18uF IPC-7351 Tantalum
C2 is 47mF electrolytic cap. 50V

Hmm I can't seem to find anything simmilair to C1 on ebay.

Would this be a good substitute?...

http://www.ebay.com/itm/20uF-3-400V-DC-Through-Hole-Tubular-Audio-Capacitor-Red-New-/300650351387?pt=LH_DefaultDomain_0&hash=item4600284b1b

or these

http://www.ebay.com/itm/10-x-400V-10uF-Low-ESR-Impedance-Radial-Electrolytic-Capacitor-105-C-audio-PC-/290612531647?pt=LH_DefaultDomain_0&hash=item43a9db51bf

[Ghazanfar_Ali]

@Broli
Ok here is another optimization. I simply increased the amplitude of pulsed DC from (0-5V) to (0-10V). And now I am placing a 10Ohms load which is almost equivalent to a heating element. Now The power output is around 800W.
And it did not affect the oscillation.
U can use capacitors in parallel and series combination to get the desired value.

[Ghazanfar_Ali]

@Broli
Ok here is another optimization. I simply increased the amplitude of pulsed DC from (0-5V) to (0-10V). And now I am placing a 10Ohms load which is almost equivalent to a heating element. Now The power output is around 800W.
And it did not affect the oscillation.
U can use capacitors in parallel and series combination to get the desired value.

[Khwartz]

Interesting approach.

thanks 

Definitely we dealing with  pumping effect
The problem I might have is gas or vacuum . TK did not used any vacuum and any gas
violence of spark gap depends on geometry of spark gap.
I have one vacuum tube that has flat discs 1.4" diameter and it works like a charm.

Good to know that.

I have noticed that  TK utilized thick wire  with flat service in all of  his devices.


Wesley

One of my compatriots in France, uses a multiple-parallel-copper-pipes-gap, but lightly separated and in the air. It makes multiple sparks in the same time and works very well for his Tesla coil to spark...

http://youtu.be/EWqRpbefAOE

I think it could be horizontal bars of copper too but with shape angles side to side...