Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

[stivep]

Wesley.
"If it is me  that is what I would do  or  buy the winder and try to find some  wire to wind it for myself."

My thoughts exactly.

Having said that, I do own a cnc router with 4Th axis drive, recently build the coil wire dispenser for it and right now I'm experimenting with it. Thinking about winding flyback coil myself if my setup and gcode programing workout...

You put the smile on my face
Right approach.


Wesley


http://www.youtube.com/watch?v=NoVFQ8R1qsA
http://www.youtube.com/watch?v=xwGuNLH2hhg

[jbignes5]

We are working on it in background. There are health and safety hazards with very strong alternating magnetic fields and possible standing wave. Additional processes are happening inside of ferrite core and unless we can cancel outside fields, we cannot meter what is going on there.

I will post here ZeroFossilFuel comment, hopefully he will not get upset

"I have been posting updates to my web site at http://alt-nrg.org/Kapanadze.html  Beside the smaller yoke ferrite shown there I also have created a new one about twice the size that I have been experimenting with. When I energized this coil from a spark gap, the magnetic interference created was so intense it shut down all of my USB webcams, caused my computer to freeze, even prevented my daughter from streaming music to her laptop 50 meters away at the other end of our house! My neighbors have not said if they experienced any problems and I have no intention of asking them! LOL!!!"

So, unless you got right equipment for this experiment, it is better to stay safe..

Cheers!

This effect can be blocked or to be very accurate reflected, you just have to statically shield the yoke on the outside to shield it from the environment. This is because you are sweeping around the device with a very high voltage field. This field is a sphere around the device for the most part. Maybe a quasi bow tie. Be very careful with the frequency of the pulses you use. Make sure it is 3-4k+ cycles a second. Tesla has very very important information about the pulses. When in lower frequencies it can be very very powerful and pull on everything around it strongly. The higher the voltage the finer the network resolution becomes. This high resolution network energizes everything in it. Metal attains a higher standing voltage from the increased resolution.
Tesla said 2k was the limit of his perception. So to be safer raising the cycles per second to 2750-3500 should be acceptable. 2k was the phenomina of spontaneous light and good feelings of the highly energized field.


Try not to go too low in frequencies. Stay on the high end and you get better push back from the universal pressure due to higher density..

[wattsup]

@verpies

The problem we ran into with the yoke is that the core seems to change properties once it has been exposed to all that HV. I don't think the yoke materiel was originally designed for HV since it is only there to guide or warp the signal which does not require HV at all. I still have mine that is OK but I still need a new flyback to drive it, hence all this flyback making stuff.

@stivep

Yes I know exactly what you are saying is right in many ways.

The problem is not to have or not have a winding device. It is knowing how to use it, how to handle the wind, how to insulate the layers, how to then encapsulate the coil in epoxy or silicone, etc, etc. There are many factors involved that if you just purchased a winding machine you would have to spend how many months just trying to learn the does and don'ts. This is why I was saying that knowing one of these guys is like gold. Yes there is a price to pay but for me the most important is being able to do some work with them and have access to them in the future for other builds.

Bob is taking a few days to work out the final pricing as what I said in my previous post is exactly what we had discussed so I am just being totally transparent about it.

You see, we can buy stuff but we cannot buy the knowledge of how to use it properly in order to expect a given outcome. These guys know all of that before they even start, they know exactly how and what to do. Like I said, if there were more orders for the flyback, then no problem to make it is robotic method at lower cost but until then we are dealing with hand made "Limited Edition" units. Anyways, don't worry, whatever the first unit price is, I will pay it for the first unit but if guys want their own flyback thereafter, we will have the price that will be the same for everyone. Bob is located in New Hampshire so not that far from Montreal.

Then only reason I am so interested in this is after having putzed around with all these regular flybacks, burned a good 4-5 of them so far and my present one is also going slowing down the tubes, I really want to try the TBC type which I have never been able to find elsewhere.

wattsup

[27Bubba]

"Right approach."
Z pewnoscia...

[T-1000]

This effect can be blocked or to be very accurate reflected, you just have to statically shield the yoke on the outside to shield it from the environment. This is because you are sweeping around the device with a very high voltage field. This field is a sphere around the device for the most part. Maybe a quasi bow tie. Be very careful with the frequency of the pulses you use. Make sure it is 3-4k+ cycles a second. Tesla has very very important information about the pulses. When in lower frequencies it can be very very powerful and pull on everything around it strongly. The higher the voltage the finer the network resolution becomes. This high resolution network energizes everything in it. Metal attains a higher standing voltage from the increased resolution.
Tesla said 2k was the limit of his perception. So to be safer raising the cycles per second to 2750-3500 should be acceptable. 2k was the phenomina of spontaneous light and good feelings of the highly energized field.


Try not to go too low in frequencies. Stay on the high end and you get better push back from the universal pressure due to higher density..

Thanks for sugestions just in our case we have standing wave what penetrates everything.
Also Nicola Tesla used 20k+, not 2k cycles per second. The lower frequency caused pain and so on.
http://www.stealthskater.com/Documents/Tesla_09.doc

Cheers!