Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

[Hoppy]

@all

Look, while some guys go into their directions of theory that is OK, I am still puzzled to the extreme.

Green Box: At 14:33 you see Temo next to the green box with the bearded guy always right beside him. When you look at all the movement of people around the bearded guy, then someone stretching forward to touch the transistors and with all those people around, the bearded guy DID NOT MOVE ONCE. Not even his foot moved. It is a nice sunny hot day and everyone is wearing a T-shirt or short sleeved shirt but the bearded guy is wearing a long sleeved shirt. The sleeve of his left hand is going all the way to his wrist. This is all suspicious activity or more a great lack of activity that only indicates that they are hiding something and the bearded guy is part of their trick. (See animation).

Then you have this other wire that is stuck onto the base of the water pipe. See image below. The wire starts at the pipe base, loops around the guys right foot and heads further away under a plate of some sort but then to the right of the plate the wire continues but now it is thicker wire. That thicker wire then turns to go towards the back end of where Temo is standing.

Now let's go back to where I noticed the light going off before Temo flicked the switched. This has now been confirmed to me by @Sergey77 as well. So I took a closer look at our bearded guy during that moment. He is totally still, concentrated and he moves his right hand finger and the lights go off then Temo flicks the switch realizing he was really late on their mutual synchronicity.

All this spells bad news for me personally, I know. Guys will say "he is grabbing at straws", guys will say "just because he cannot find OU he is attacking TK". hehehe

None of that is true. Weather it hurts or not does not make any difference to me as long as it gets closer to the truth. I have put my own OU developments on hold for so long now because of this TK business. I really thought TK was onto something but the more I look, the more I realize TK was just tricking people into thinking this was an OU miracle and because he was getting paid for it, this made the "all is fair in business" seem OK for him. I don't think TK knows what OU really means.

This does not take away from all the other guys working on their devices, regardless if it is TK based or oriented as they may think it is pertinent in TKs reality of the device. This is only great that others use their own brains to work out the solution but for me, all these things lead to one conclusion. TK did tricks and he got paid for it. It is not for me to find out exactly what the trick was but we have enough elements in hand to conclude that TK used a number of people to accomplish his Green Box video to make people think this is OU.

The black vested guy with his fancy ammeter comes off as a true EE investigating to his best ability but he cannot see all these events around him to come to any greater conclusion then, this may be OU. Even the a.king21 group and Wesley came back with eyes wide open with OU in their hearts and minds.

Sorry, but for me this is the last time I will spend part of my limited life on this TK stuff. No more. I am now taking my own direction and working on my own designs that have been put on hold. I will no longer partake in any video analysis that involves screening video frames on any device made by a guy that is not willing to divulge how his device works from day one.

So if you have an OU device but do not want to disclose it, then as far as I am concerned you are a fraud and should go f*&k yourself and do not waste our time, money and life and energy and brain-power and intent and vision. We should just tell these furt heads to F off and keep concentrating on what you yourself are doing on your own bench. After so many pages, so many battles, so many theories, so many smart people here that would render TKs own true OU intellect as that of a peanut compared to most here, I have had it. I do not want to start 2013 with TK crap. When it all simmers down in a few years, one of TKs cronies will come forward and explain how they did the demos and we will all hit ourselves hard, realizing how many years have passed.

So @members, you can organize to pay TK more money, but if you expect any more then what a.king21 and Wesley got, you are dreaming in full color. These guys are not going to let you see squat because they have nothing. Their patent was only to give themselves some credibility and the patent itself is just a bunch or irrelevant mumbo-jumbo.

If you guys want to spend more time on this, then may I suggest you try your hardest to find out what exactly happened in Turkey. How can such a big demonstration of supposed OU not wind up as a commercial device since so many years. I think during that demo the officials found out it was tricked and just kicked TK out of the country. I don't know but from all the other videos, we now know TK does tricks and he gets paid for it. David Copperfield does tricks as well and he gets paid for it. So it is all fair business to trick people as long as you are getting paid.

So, I will not add any more elements. I will sit on the side lines and just work on my own stuff from now on.

wattsup

Added: The last image is really an animation so if you cannot see it then go here and click on the gif file.
http://purco.qc.ca/ftp/Tariel-Kapanadze/greenbox

Good observations, especially concerning the white wire I pointed out as suspicious in a couple of previous post. I asked the question way back about how many people were part of TK's team. I would say a good few of the crowd around the demo table. the whole effort cannot really be taken seriously as a demo of OU as there are dodgy looking characters, lengths of wires scattered about on the ground which look really suspicious, not to mention the high level 'washing line' and other suspicious things that have been raised before. Like you, I've seen all I need to see to convince me that its not worth wasting any further valuable time analysing and commenting on this particular video. The aqua2 video is more interesting IMO and although I'm fairly sure that its faked, I have not as yet been able to decide on whether he doctored the earth wire or used a more elaborate method.

Anyway, I will join you and sit on the side lines and let the TK believers waste their time continuing to throw up even more fancy theories.

[Сергей В.]

ПРИВЕТ ВСЕМ !! GOOD NEWS TO ALL !! UFOPOLITICS MADE 6 TIMES OU MACHINE !! THERE WILL NOT BE AND OF THE WORLD BUT WILL BE END OF BANKERS ILLUMINATI CABAL. WELL I SENSE WE ALL WILL GOING IN THE NEW ERA OF FREE ELECTRICITY ON THIS PLANET !!

MESSAGE FROM UFOPOLITICS

Hello to All,

Physically I feel wasted...My body is a complete mess.
But My Soul is full of joy to see with my own eyes the fruit of so much hard and endless work...
Soul-Brain will take care of Body later on...it is a rejuvenating process.

First I want to thank My Dear Old Friends here...that had followed me since Thread One...Thanks guys for trusting me, without your support...I would have never , ever come this far....and I love You All!

This is a "Work In Process" like Sir John Stone wrote...not finished yet...meaning, Do Not go blindly trying to buy stuff and spent your money into something NOT Completed yet. The building of this Machines requires high craftsmanship experience and tons of very HARD WORK...plus all the required equipment needed to make it happen...as also the knowledge of handling AC Mains that could kill you in a nanosecond...it could stop your heart in a bliss at contact....and please, We do not want to feel guilty, that we did not warn you about it.

I promise I will make ALL Measurements required by Physics and Electrical Engineering to fulfill your doubts and concerns.

Originally I was searching (shopping physically, because I wanted "yesterday") a State of the Art Power Supply that will render the V/A to feed Prime Mover, which is 36V/50A...No one had it in stock...and honestly the prices are so high...that I can not afford it right at this moment.

Yes, the Set-Up needs a speed control installed at the end of Motor.(Prime Mover)..connected to a "smart" electronic controlling switching system that recognizes a drop down in RPM's and increase its feed...no sweat, that could be done, like John Stone wrote...that is "classic stuff"

In order to make it a self runner, using batteries just to start...we need an Ultra Fast Transfer Switch with a Storage to supply a feed during the nano seconds of drop down vertical curve...so, it needs to be a very robust Capacitor Bank.

I am going to try the old method...with a transformer...from an old Charger of 36 Volts...I have bought 10 1000Uf 100V Cap to make that bank for now....let's see if it works...my only concern is that it would have a too high amperage that could damage the Asymmetrical Motor...but if it does...I will re-wind it again and again...till I drop down.

A Word on Generators behavior:

This type of new Brushless Generators have a benefit, less friction...but the Magnetic drag to output power is still huge...once that we excite their Capacitor.

One very IMPORTANT aspect to have in mind about this kind of Electric Symmetrical Generators is that this Machines are either "Black or White"...Power or No Power...meaning, they require "religiously and fanatically" an Accurate and Constant (no drop) of Two parameters together, Speed and Torque,and if just one of the two, drops below required spec's...it will not output a single Milli-Volt, it is that simple. For example, I tried with the 24V/33A...it ran excellent but did not developed the required RPM's when I excited its Capacitor...output was a big zero, and it was turning 2800 RPM's...
Of course it is not exactly required a 3600 steady RPM's...but a RANGE...I believe it is from 3400 to 3800 Max...to output power.
When buying a Gas Engine for an specific generator model, factory specifies an Accurate HP Output MINIMUM LIMIT...And for this Mecc Alte it is a robust 13 HP, and like for most Two Poles generators that torque must be obtained steadily at 3600 RPM's for US and 3000 for Europe , South America and other Countries where they use 50 Hertz.

The RPM'S vary with generator design, for example a four pole generator will only require 1800 RPM's to output (1/2 half of the two poles) but, the drag is bigger, so it requires a higher Torque (HP) to turn those four stiffer poles within the generating fields to Output power.

The rule of thumb works only for bigger sized Gas Engines to smaller output Generators...NOT the other way around...meaning, We can not buy a 5HP Gas Engine and try to run a 6000 Watts Generator..."maybe" thinking of just using 2000 Watts surge...sorry, but NO, it does not work that way...you will get zero volts output...You NEED the required RPM's TOGETHER to a steady factory required HP for that Generator to produce its Constant Output. And AGAIN, no, IT WILL NOT get "first 1000W and then 2000, and so on till it gets the 6000...NOPE!...when it Outputs...it Outputs its FULL POWER...or absolutely NADA.

If we were talking about an old permanent magnet dynamo...then it DOES Apply there...we will get output from 1V to Max Prime Mover could render in mechanical work....unfortunately in all our daily electrical needs we need more than just a few volts and a few amperes... so we need this heavier machines.

This Motor accomplishes that task, just because it does what physics said once it could not happen...obtaining a very high speed at same rate as the delivered torque...but of course that is completely true...if we are referring to a Symmetrical Motor...that simply, do not apply with the Asymmetrical Systems.

I have an Identical, "Untouched, Unmodified" Imperial Symmetrical Motor...that I WILL install easy in that Generator Rack...then you will see that it will never obtain the results we have got with the modified version.

I also have a 5800 Watts Gas Engine and pretty new Assembly...that I will be adding the same loads and observing behavior...

I still have to check for input spec's (this Generator renders 240V/25A)...but I will be turning On My Miller 240V Mig Welder...and welding...while powered by this set up...IF it is not a 240/40-50A...then of course it will never turn it on.

Now, one important thing that I will mention AGAIN, is that NEVER turn OFF prime mover while Generator have the Loads ON, NEVER!!
As also never turn Prime Mover ON while Generator have Loads connected and ON...It needs to run for a bit, reaching normal working spec's before turning all loads ON!

BY NOT DOING ALL THIS REQUIREMENTS YOU WILL DAMAGE YOUR GENERATOR AND ANY SENSIBLE LOADS CONNECTED TO IT.

Please follow all Generator Manufacturers suggestions religiously...and you will have a very reliable machine that does not require any maintenance as the Gas Engine does...just look at your Gas Generator Manual...and you will see...there...

"...Replace Air Filter every bla, bla, bla...
Replace Spark Plugs every bla, bla, bla...
Replace Spark Plug Cables every bla, bla, bla...
Replace Oil of type such every bla, bla, bla...
Replace Gas Filter every bla, bla, bla...

If leaving Generator in Storage use additive "such" for long periods storage, to prevent from clogging occurs in the fuel system..."

Electric Generator requires absolutely NO Maintenance in all this "Gas Rituals" process...except, replace the brushes IF it is not "Brush-Less"...

Regards to All and see you soon...and be patient please!


Ufopolitics

RAW VIDEO, FIRST ROUND...BETTER LATE THAN NEVER...
http://www.youtube.com/watch?v=HHeDYP1YWDY

HIS CHANNEL
http://www.youtube.com/user/ufopolitics


TO ALL: COPY AND SPREAD AS MUCH AS YOU CAN ALL OVER THE WORLD !! AND WAIT FOR NEW VIDEO INFORMATIONS HOW TO MAKE AND TRIMM.

NOW 6KWATTS OVERUNITY TOMORROW 6 GIGAWATTS OVERUNITY



...
HIS TOPIC - HERE YOU WILL FIND ALL INFORMATIONS AND GET NEWEST DIRECT FROM UFOPOLITICS
http://www.energeticforum.com/renewable-energy/11885-my-asymmetric-electrodynamic-machines-95.html#post218245
...

[Сергей В.]

WELL FOLKS TAKE SOME TIME AND SPREAD A GOOD NEWS ALL OVER THE INTERNET !! 

ON
http://vkontakte.ru/
http://www.odnoklassniki.ru/
https://www.facebook.com/
http://twitter.com/

and all networks you know !!

[elementSix]

Here is a quick info guide to all the parts of NMR.  The newer video of the TPU has them talking about how it works and what they used in the TPU was Ceramics.  Which makes sense because Ceramics are superconductors.
The web page guide...
http://chemwiki.ucdavis.edu/Physical_Chemistry/Spectroscopy/Magnetic_Resonance_Spectroscopies/NMR/Nuclear_Magnetic_Resonance_II

The new TPU video.  Watch most of it..  Pay attention to when steve runs the magnet around the TPU to align the nucli for the pulses to spin right.. Its At 4min 40sec or 3min 40sec..
http://youtu.be/W_fRKxz_UNo#t=227s

[Zeitmaschine]

Like you, I've seen all I need to see to convince me that its not worth wasting any further valuable time analysing and commenting on this particular video.

But what about analyzing this statement below?

How to figure out whether the TK device could be real or not? It's easy in theory: If Kapanadze has really contacted Mikheil Saakashvili because of the device, then I don't think the device is just a Copperfield trick. So it would be nice if someone near TK could confirm that he has indeed contacted the President of Georgia concerning his OU device.

And BTW: If the TK device is fake, then what the distractors are all doing here?

Sorry, but for me this is the last time I will spend part of my limited life on this TK stuff. No more. I am now taking my own direction and working on my own designs that have been put on hold.

But if OU really exists (so it makes sense to further work on it) then why should just Kapanadze not have it?