Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

[verpies]

The game with "cores" are fruitless... , if we don`t understand "the principle".

Enlighten us then, what is the operating principle of OU devices containing "cores" ?
For example this one...

[a.king21]

@a.king21, you should have also underlined the' long grounded wire' as this is first time I have heard such an expression. Almost all working replications include a long grounded wire, usually the camera man follows this all the way down to show earth connection at end. Any one know why long wire is needed ? Do well put together replications including mine fail due to short earth termination?
Regards
Keith

Yes I agree, but it's got us thinking along the correct lines. So a short sharp spike also creates a static disturbance. In order to harvest this we need long earth wires and a short aerial. (Tesla). Now Kapanadze's devices have some Tesla logic behind them, we can think along correct lines.
My personal view is that the earth, being one plate of a massive capacitor, creates an electromagnetic duplicate of an electrical transmission, and harvesting this and looping it into the device is one of Kapanadze's secrets. This is in addition to the standing waves which are created when a short sharp spike is produced. Standing waves are a Tesla discovery also.
The main thing is to harvest the effect of the short sharp spike using a short aerial, and long earth wires. The bifilar resonant coil system is also crucial. Step down should be on a 4:1 ratio to maintain resonance. (Tesla again).
Also the 'A'L1 and 'B'L1 coils representing transmitter and receiver respectively should have an earth link on the negative side. (Tesla again). (Look at Tesla's Wardencliffe patents).
It's possible that Kapanadze simply linked L1 and L2 via earth long wire ground and got away with a Tesla shortcut, but it has to be tested by experiment.
Kapanadze told me in passing, (whilst discussing various incarnations of his system) that he needs to measure his wires and the coils are bifilar. So if he needs to measure and uses Bifilar we look to the source.  The source is Tesla. So there is confirmation with Tesla.
The next step is mixing harvested static "from the air" (Tesla)  with ordinary electric input. This is where the Melnychenko "static mixing" patent comes in. So we get a further kick in an electrical version of "stochastic resonance" which produces further spikes in the form of beat frequencies.
All we have to do now is to build the thing.

[MenofFather]

Enlighten us then, what is the operating principle of OU devices containing "cores" ?
For example this one...

This one seems not have overunity. Because brightness not full, Weshley say that full, but in reality I see, that only about 3 procents of full brightnes.

[MenofFather]

Hi, Keith!
Yes LONG wires are VERY IMPORTANT part of the "effects".
I do the very simple experiment: 230V main => Transformer => Rectifiere + Capacitor 10 000uF => LONG WIRES (long as possible, my was 2meters 125mm2 "soft wires") => 555 timer circuit with resistor and Zenner diode to 10 Volts with 1000uF cap to stabilize 18V power from rectifiere with 10 000uF => MOSFET driver + Induction Coil WITHOUT any BackEMF filters!!!! => At the end spark plug. We can spark "earth ground" or "minus ground". I don`t remember but I think I do like ordinary- to minus.
How do you think what was happened? These long wires starting colect voltage!!!!
My Zenner start "blow up" and Multimeter go to HIGH!!!!!
It is.
You can think about it!

Without schematic I not understand, that you saying.

[GeoFusion]

Kapanadze Schema?
This might work, and show's the Electrostatic way of harvesting and mixing.

Cheerz~