Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

[xenomorphlabs]

Note to all people here : Stop doing police work and investigating SR.. that way you  find answer, cause there has been 200 forum pages on Russian forums without success..  my opinion is thats waste of time... probably its easy to start from scratch like KApagen ..

/Sarcasm on

Stop investigating Tesla! There has been 500+ books and 300+ forums with dozens of threads of 200+ pages about him WITHOUT SUCCESS.

/Sarcasm off

Just let everybody do what they like to, it´s their decision

[stivep]

NO WE ARE NOT TRYING TO REPAT KAPANADZE
We are trying to take advantage  from everyone who contributed in this field

I have  perfect fluency in at least 3 of Eastern European Languages
That gives me access to all of the Slovian root of linguistic similarities.

Isn't that surprising that   all of the  knowledge in the area of Tesla Invention originated from this part of the world,  including Nicolas Tesla by himself ?

The progress in partnership for NO MONEY including our  position in this area is as fallow:

1. In Poland Jacek was able to light the light bulb from HV
2. The signal representation in laboratory is investigated  in reference to Low Voltage and High Voltage signals.
3. You do not have to geest what is really going on   when we finish we are willing to give it up for free.
4. We will welcome  everyone opinion in this area
but
I'm very cautioned ( ostrozny)  with sharing the progress  as SOME OF YOU Gentleman are very much discouraging.I have seen so many  very unpleasant attacks have been made  from one person  to another.And I do not want to experience this by myself.
All of the informations are being published the best way we can express ourself in English and in the form we are willing to present it.!!!!

Behavior of some of you critics or servants of the "power world" has nothing of values  I was raised with,
in small country of Poland.

5. The explanation is in Polish but major factors are in English


http://www.youtube.com/watch?v=A695XSqAdPo

http://www.youtube.com/watch?v=9Q8r2ikJtZ0

there is another video progressing  Free Energy Device wee are working on.


http://www.youtube.com/user/stivep1

Free energy device:
1.test of generating part,
2.sparking part.
3 signal representation from oscilloscope ( analog, digital)
3 spectral analysis from 20Hz to 40MHz
5.comparison of two channels
one with High Voltage Probe
second with lo voltage generating circuit
6 Kenwood 2000 used as frequency response device
7. podsumowanie dedykacja powod i kierunek tych badan.

[baroutologos]

They ARE OU... but problem is that KACHER itself is inefficient oscilator: I presume effcienty of KAcher oscilatir is LESS Than 35%

You presume. Make one or few and see yourself

It is known that Radinth is related to Electrostatic... BY CORE behavour of this setup it behaves STRANGELY.... TC = HI current at the bottom and HV at the top...

Maybe for you sounds strange that Tesla oscillators have high amperage at bottom and few at top. This is attributed solely to the distributed capacitance of the coil. Increase topload capacitance (in relation to the distributed of the coil) and them almost all current from top to bottom is equal

if you want to wiresly burn ligth bulb you need another TC to collect HV electrostatily and convert it to high current : low turn coil... WE here have ONLY capacitor directly to load...

I have done it a couple of months ago. One kacher transmiting 2 receiving. All easily explainable and under-OU of course.

Now lets see : I read that kacker is about 20-30% eff... and that  TC has low Q... much resistance(akin effect, distributed C etc) .. there you drop half of the energy for sure .... Lets sey that 100W bulb (Russian rutube channel destine) works about 70% eff with only 35-40W of imput power : ADD to that so LOW efficinet kacker + low Q tesla coil + heating of TC (resistance of wire, skin effect atc)
Kacher has NO C.. and can probably behave AS class A amplifier.. in theory it CANT have more than 25% eff.

I was one of the first to question Destine about his claims. Those are not trustworthy figures. He denied just putting an ammeter and a lamp side by side. Few Russians from time to time will make extraordinary claims, as many people in here do. we would be lucky in those were true. (no such luck yet)
I learnt to make Kachers by Destine's specs. All made by me eat some 100watts and light a 100w bulb to 50-60% efficiency.

BUT ground one end put plate near TC ... and TELL me HOW can TOP plate be near 100kV(lets say we have 100kV TC in the test)
IT clearly oscilates about +/-200V ant 70% eff...

why clearly? If you have paid closer attemtion, you would have seen the same guy in the  has an electrostatic meter which goes crazy approaching the coil. PLATE near coil reaches thousands of volts.

HOW CAN there be 25kV on that plate  of its connected with series with bulb and grounded.. it DEFIES BASIC law of transformation ....
Only radaint energy can do that.. and that has been explained in Tesla patents with elevated plate ... near radiant energy .. etc

Which law? This is not a inductive coupling imo. This is a capacitative coupling and 25Kv is too much. Perhaps 2-3Kv the plate reaches. And it is perfectly possible and works as one capacitor plate the TC and the  one the metal plate near it. (Another reason so as not to believe that plate has 16 pf capacitance only).

I am gonna say it to you one more time. Elevated capacitance in Tesla oscilators is for charge storage! (electron storage) It works as a reciprocating pump that pulls-pushes electrons in-out of the earth. Temporarily those sucked out or pushed-in should be stored/supplied by somewhere. this is the function of the elevated capacitance. An "elastic" charge storage medium.

and (according me) the Kapanadze mystery upon this lies.

SORRY for bad English , and typos

You are welcomed!

[grizli]

/Sarcasm on

Stop investigating Tesla! There has been 500+ books and 300+ forums with dozens of threads of 200+ pages about him WITHOUT SUCCESS.

/Sarcasm off

Just let everybody do what they like to, it´s their decision

Sarcasm on
Lol.. Tesla DOES NOT need police work.. it just need WORK... TESLA wrote books and made patent .. all is there ... SR made  messed up youtube video .. thats all hehe...

[grizli]

You presume. Make one or few and see yourself
Maybe for you sounds strange that Tesla oscillators have high amperage at bottom and few at top. This is attributed solely to the distributed capacitance of the coil. Increase topload capacitance (in relation to the distributed of the coil) and them almost all current from top to bottom is equal


You are welcomed!

He he do i have to repeat : HOW can plate be at 20kV and be in series with 220V bulb grounded in the same time?

I have done it a couple of months ago. One kacher transmiting 2 receiving. All easily explainable and under-OU of course.

It is maybe easily explainable, BUT of course you did not got OU.. when all things you used of input are inefficinet.. Kacher oscilator.. low Q TC etc etc..

I was one of the first to question Destine about his claims. Those are not trustworthy figures. He denied just putting an ammeter and a lamp side by side. Few Russians from time to time will make extraordinary claims, as many people in here do. we would be lucky in those were true. (no such luck yet)
I learnt to make Kachers by Destine's specs. All made by me eat some 100watts and light a 100w bulb to 50-60% efficiency

Kacher cant be more than 25% EFF.. add that to TC secondary coil loss.. you see OU

AGAIN HOW can light bulb work at 1mhz when 15pF metal plate required to be at least 25kV(caculate exact values) to burn...

why clearly? If you have paid closer attemtion, you would have seen the same guy in the  has an electrostatic meter which goes crazy approaching the coil. PLATE near coil reaches thousands of volts.

SPACE . or meter than is NOT groundes EASILY REACH thousand volts....   PLATE attachet to 220V bulb CANT REACH THOUSANT volts.. or bulb will burn out !!!

Perhaps 2-3Kv the plate reaches.

3kV is NOT enough at 1mhz

AGAIN  SORRY for repeating : HOW can 220V bulb be attached to metal plate and grouded if metal plate should reach 25kV (guess , not calculated) to burn and 20-30W at 1Mhz....