Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

[baroutologos]

Subjected to two frequencies of the magnetic flux in the ferrite or to two frequencies of the electric current in the winding?
In other word what creates those frequencies? What drives what?

Hello Verpie,
I guess i did not expressed myself well . I mean the latter.

In other words, the same winding subjected to 2 or more frequencies is a detrimental issue. The magnetic flux to respond into two frequencies by two coils (hence shown to a third probe coil, inductively coupled) i think its peculiar enough.
what you say?

[firlight]

@MasterPlaster

Can you zip that file and send it too me at contact(at)purco.qc.ca. I cannot open the rar file for some reason.

@all

I am very puzzle by the terms ferromagnetic-resonance (FR). I don't think anyone has ever really measured a frequency at which the ferrite resonates because the ferrite will have one or more coils on it and all the results will be dependent on the coils themselves. Now if the ferrite was sitting beside a very powerful coil that was pulsing and at a certain frequency the ferrite just cracked to pieces, or started to move erratically, then I would call this some type crude proof of a ferromagnetic resonance. But if the ferrite has coils on it, then it is no longer FR but inter coil resonance via a ferrite mass, which is not FR.

Can anyone please explain in layman terms what FR really means.

wattsup

Ferro resonance is a non-linear effect,you need to create the conditions so that your transformer,core
is operating just up around the knee at the point of saturation of the BH curve of your ferro-material in a non linear mode.You just have to hit that sweet spot.It will start off as non-linear stochastic resonance,
the random oscillations will gradually build up to full resonance.
Take a look at this vid .It is clear and concise. Dancombine has created a excellent presentation
and shows how it should be done.

http://www.youtube.com/watch?v=fd_3lCG1oiI


Dave

[forest]

You see where is the problem ?    You should have replaced copper braid with proper coil - antenna !
Aidas , congratulations. In my humble opinion you should have now the proper degausing coil which is MUCH more then copper braid. That's what I have in my device I'm slowly building from the last year summer.(you know that I'm slow ramset, right ;-) )


wattsup and all people experimenting, I propose you to make a change in device : wind HV coil on inside wall of yoke (yoke must be insulated with electrical tape first) , then wind second part of coil on outer wall of yoke but in opposite direction.Winding on inner wall is hard part- today I would rather prepare some cardboard cone to speed it up.


This is the secret ! Magic Russel coil which you can easily find on Floyd Sweet schematic. We are very very close my friends.    (btw  I saw that Tito is revealing his method, be fast and save it too)


Verpies, I badly need 100W audio amplifier capable of amplifying pure sinewave 50Hz signal but I have no time or money to buy it at eBay (I thought that you know that shipping costs would be overkill here in Poland  ) . Anyway I think I could help. I have that device laying in dust from the last year as I said when I made connection of  Tiger schematic with Sweet ideas and I'm quite sure that it works and why it works.
Just analyze the coil windings of degausing coil. This is radio antenna (most probably that kind of radio antenna called magnetic antenna, but I'm not expert here) , radio waves are flipping iron atoms nucleus perpendicularly to magnetic flux which cause immediate flux change direction.I see it WITHOUT HV but my signal generator is outputing only a few watts and max 11 volts.


EVERY yoke should work ! Basically you just HAVE TO TUNE degausing coil to choosen radio station and then have HV sparking at the same frequency,  but that's not  all IMHO. You have to be lucky to have ferrite composition respond on that frequency and  I think I can explain why. This is not about domains, in fact it will work the best with ONLY ONE domain, which is of course unrealistic. This is pure iron atom respond to radio wave or rather to Tesla radio wave, longitudinal. You have to tune to 1/4 wavelength of radio station and to the iron atom resonant frequency which depends on crystal structure.


It's interesting that it does not depend in theory on frequency of HV sparking, which is only the repetition ratio !!!! As soon as you digest that idea from Tesla you will find how we are fooled by our wrong understanding of Tesla, due to school teachings. For Tesla there is no frequency, he always thought about wavelength and speed of propagation. When he said about frequency he thought about repetition ratio of effect !


I understand Tiger that he want to finish his device first and know everything about it before sharing anything; maybe he also want to protect his rights in the way of patenting it. That's alright, personally I would do the same    if I had money and time (I'm mad angry that my situation force me to search for any stupid work instead of working on device laying in corner of my "lab" and covered by dust).


Ok, ok....sorry for that long flow of thought but I'm trying to put it clear and for all what is important and my amount of english words is quite low. Let us advance by all means as Tesla stated !


Ok, I twisted myself, more later.

[John M]

No, the direction of the windings has no influence on the polarity of the induced H-Field because its direction is determined by the direction of current and the direction of winding. Current will flow in opposite direction in oppositely wound coil, but the H-Field will be the same.
So Lenz law is not defeated at all and the induced current in the receiving coil creates an H-Field that opposes the field of the driving coil and aids the field of the other receiving coil.

Verpies, you are exactly right when the primary is inputting a sinusoidal, square wave etc. Inputting with a spark gap is much different.
I am not an expert in explaining this, so please see info in the attached document.

John

[osamaricu_te]

Hey!

Wesly is back to town?
Great news!
I am glad that my words so  hardly houched him and motivated to write so much here!

PS Stevep!  Dont stop! I like your ways to ovoid the  truth!

Personally not the type to comment on forums too much, more the one to read and listen what smarter/more educated people say, but in your case, I must make a comment although its not topic related so excuse me all.
I read most of your posts on this forum and energetic one... People like you disgust me my entire life! All you do here is foul mouth people who are doing their best to help everyone. Actually thats all you do... What happened with your promise on other forums that you will disclose everything in full details in 3 days?

You are not some young kid to be acting like that, you should be ashamed of your self. These guys you bad mouth, are doing their best (which is ALL you can ask from another human being) and on top of that, they are not keeping it to them selves, but sharing with everyone, your self included.

In my book that is a VERY BIG deal, especially compared with majority of people in this world! I questioned my self what would I do if I were in their place and this was 100% working as it seems. Would I share it over a forum... I cant say I am sure I would do that... honestly

Finally, I apologize for being off topic, but if I was a moderator here, with so many off topic posts on your hands I would ban you cause you are trying to ruin some very nice and exciting moments here!