Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

[Hoppy]

If this is real then it is the Kapanadze secret:


http://www.youtube.com/watch?v=HsKdgLIVnu8

At what point - number of turns - in the video did you doze off. 

[Hoppy]

Hi everyone,

I have found a video on Tariel Kapanadze -From video looks like a interested investor or observer-unconfirmed.


Take a look at video you will notice basic test done like "test pen" on garden tap and etc.
Please hear the sound of the spark do hear the frequency of sparking which likely this is used to "excite the toroid core in series via a thick straight cable in it"(maybe) at 8:40min onwards.

This is meant for those whom may not have seen this video.

http://www.youtube.com/watch?v=8CSkzA9oPSE

Very high amps in the straight black cable then. What do you suggest was supplying those amps?

[forest]

You know what : I hate such investors , asking in wrong time    Tariel was already trying to answer big question : why nobody replicated Tesla schematic so far . He ended with "потому что" when the invertor interrupted Tariel monologue doubting if the schema is  practical. Or maybe he did so by purpose

[magpwr]

Its a nice morning over here, i drink coffee and i feel like i want to comment something..


Assuming you have a working device per Kapanadze (no such luck) and a further assumption that it works on NMR, then if you employ a Toroidal or cylindrical coil (as we have seen) having the magnetizing windings wound around the cylinder (inverter or not) then the Oscillating magnetic field of high frequency (hence RF) for achieving the procession must go vertical to it. Vertical means on the other magnetization vector, i.e. wounding the coil from top to bottom of the cylinder (composed of many toroids) each turn passing inside the hole.


Only one cable inside the hole means 1 turn. From my experience, windings like that have much larger inductance per turn (as its natural) than the around the cylinder windings.
e.g  for a cylinder made of 20 x 35mm diammeter soviet 2000 HF permeatbility toroids, some 10-15 turns of wire wound around the cylinder equals in inductance to one wire passing through.

Hi Hoppy,baroutologos and everyone,

Recall i had posted something yesterday about "impedance mismatch"
Let me  explain in details which is related to my recent personnel important discovery indirectly or directly related to Kapanadze device.

I have attached the same SR193 circuit diagram which i believe some of us may have already seen it 1000 times over in this site.
I am gonna attached this link www.youtube.com/watch?v=pDXKnk9hFMI  Video title :Radiant Oscillator Circuit / Don Smith Part 5: "0 Amps" X 12 volts =12WATT output
There is a another video which uses somewhat similar setup as above eg:ignition coils but much higher input power was required for that one.I can't find that link now although i have posted it in this topic couple of weeks back.
Now i want you to pay attention to the attachment SR193 and observe there is actually 2 HV coils interacting with each other via spark gap in this case.One is HV TR3 and another is device L2 coil.
Both experiments are hv coils working together to properly down convert hv to useable voltage as shown in above video.Only the SR193 is little more complicated to explain in words.


These are my current project or about to commence pending hv components and etc-

1)HHO project 1watt HHO production ver 2.0-http://www.youtube.com/watch?v=NJw4SSjnejM    (Back to drawing board after there was a recent scientific discovery using "Super corona dope" on tube to increase production and lower Amp draw.Current stainless pipe not a seamless 316L pipe which prevent the formation of oxides on tubes after 3 months of conditioning.Although i do have some improvement related to bubble production at low watt before increasing power.I'm unable to beat Faraday Law at this moment after performing the bottle lpm experiment and then calculating the formula after taking hydrogen portion from HHO(energy here means hydrogen in faraday law).

2)Lithuania device-Merely completed HV driver stage using 1 I/C:SG3525 with 2 output to HV transformer.Currently waiting out for delivery of 40kv diodes and 50kv caps in 2 weeks time to continue.
   In the meantime i did side line from above project by creating a Avramenko plug version 3.0 using 1 wire power from disposal camera to produce automatic flash using 1 important component SIDAC
http://www.youtube.com/watch?v=YG5zUKOrboY  It's the smallest setup for 1 wire powered automatic flasher.

4)Sweet VT device and it's associated experiment-Barium magnet-I have just completed communicating with a company in China today to manufacture for me couple of those special magnet base on my provided spec.This magnets will arrive around 1 month+ time.After which i need to do some QC check for magnetic fracture via magnetic viewing sheet as part of the experiment.

5)Kapanadze device-This is new project which i'm about to start as well.I have just placed order on nanocrystalline toroid(4.5mm dia 17 of those) and other vital components.
   

[a.king21]

At what point - number of turns - in the video did you doze off. 

Well that's not the point. We are always complaining that something is missed out in a replication. Here the guy builds the device from scratch. My comment is that if this is real then it is the Kapanadze secret. So has anyone any practical input here -  or have the disinfo people done such a thorough job that no-one will even try and replicate?