Magnetic Resonance Devices based on Don Smith Concepts

[Peterae]

In the patent pending Diagram page 34 of the pdf, he specifies a spark gap of 0.0025 Inches, this converted to mm is 0.0635mm which given in air the breakdown voltage is 3000v/mm gives us a gap breakdown voltage of 190.5V

Peter

[Peterae]

Spark arresters can be found in master telephone sockets, here in the uk they are rated between 200 and 260v i think.

[Yucca]

@peterae, I always wondered what those things in UK sockets telephone were, I thought they were snubber caps, now I know. The dip meter should definitely be handy for working on this stuff. I have been using online calcs to work out coil inductance and then looking at their performance using a sniffer probe on my scope to check resonance freqs and get a general feel for Q. The calcs have proved quite accurate at predicting the coils self resonance.

@all,
OK guys, I've just finished making my primary slipover coil, it's not as neat as the secondary because the 12AWG wire is very stiff to work with and I was using the seconday as a form so was winding and spacing by hand without a rigid form and spacers, see pics.

I first wound the 12AWG tightly round a glass jar 1cm less diameter than the secondary, then I pried open the spring gently so that it hugged the secondary ribs and then just spaced it up by eye.

I will try and build up a device later today if I can find some time.

[Paul-R]

People here will never achieve overunity...first off i have seen god

Then ask Him how its done, for God's sake.

...and get yourself one of those Bedini SG kits and prove yourself wrong.

[Yucca]

Just finished a first prototype. I will fire it up after midnight.