Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Second Stage Joule Thief Circuits

Started by Pirate88179, November 21, 2009, 02:06:51 PM

Previous topic - Next topic

0 Members and 9 Guests are viewing this topic.

jeanna

So Gary,
Will you be connecting the end of one wire with the beginning of the other to make it a JT primary?

I am confused right now, because I do not understand where the secondary will be?
Is the outside secondary going to be sharing a little of the cores of these? I think it must, mustn't it?
It is a similar question I have with my conical wound secondary... or whatever that is.

jeanna

innovation_station

Quote from: Pirate88179 on December 10, 2009, 07:24:53 PM
Here are some photos.  Sorry for the blurr, I was in a hurry as I am still trying to get this done.

Bill

i say i say .... damm!   NICE UNIT!

WILLIAM

i cant keep up

LOL  let her RIP!

THIS IS TOTALLY AWESOME

ILL tell ya why there no w core 140mm cuz mike bought them all ... i sent him this ring a long time ago to NEW YORK IT IS ALL POSTED IN THE JT THRED!  he still never paid 1 dime for my materials to build it ..  ... and so they steal!!!

so i build it better ... WAY THE HELL BETTER !  : )
To understand the action of the local condenser E in fig.2 let a single discharge be first considered. the discharge has 2 paths offered~~ one to the condenser E the other through the part L of the working circuit C. The part L  however  by virtue of its self induction  offers a strong opposition to such a sudden discharge  wile the condenser on the other hand offers no such opposition ......TESLA..

THE !STORE IS UP AND RUNNING ...  WE ARE TAKEING ORDERS ..  NOW ..   ISTEAM.CA   AND WE CAN AND WILL BUILD CUSTOM COILS ...  OF   LARGER  OUTPUT ...

CAN YOU SAY GOOD BYE TO YESTERDAY?!?!?!?!

innovation_station

Quote from: resonanceman on December 10, 2009, 09:10:15 PM
Bill

If  you go to the Magnetics website and  click on  the  Distributor  Inventory button  ( it is 2 buttons above the order samples button ) 
Then  type  the  number for  your  toroid in  49740 will do
You  will find that  no   distributors in the world  have that toroid in stock .
If  you check the next 5 largest  toriods listed   you  will get similar  results .
The largest toroid  available  through  distributors of Magnetics  is 48613   85.7 MM
Not  small but  not near 140 mm  I do not  remember  the exaact numbers but I think there are a few thousand  in stock around  the world .

This is what  I mean by short supply .

Plus ...... if the powers that be  tried to stop  us ......preventing us from getting large toroids would  be  relatively  easy for them .



gary

gary !!

what a wicket idea!

that looks darn kool   just wild ..  i have to build that!  that is simply too kool

w

ps this quote goes with my last responce why there no W core 140 mm cores as mike sent me that core to build it on ... cheep guy probally got a sample payed the shipping got the teck for free ... too bad ... i guess he never knew ... reality is i can tune TO ANY CORE... : )
To understand the action of the local condenser E in fig.2 let a single discharge be first considered. the discharge has 2 paths offered~~ one to the condenser E the other through the part L of the working circuit C. The part L  however  by virtue of its self induction  offers a strong opposition to such a sudden discharge  wile the condenser on the other hand offers no such opposition ......TESLA..

THE !STORE IS UP AND RUNNING ...  WE ARE TAKEING ORDERS ..  NOW ..   ISTEAM.CA   AND WE CAN AND WILL BUILD CUSTOM COILS ...  OF   LARGER  OUTPUT ...

CAN YOU SAY GOOD BYE TO YESTERDAY?!?!?!?!

innovation_station

Quote from: gadgetmall on December 10, 2009, 11:50:41 PM
I am sure this one will produce high volts . I have a 6 turn primary and 7 turn secondary . Its lighting up 25 leds in parallel on the secondary and two on the transistor one  BC led  and one CE all at the same time . have you ever seen one light from both  bc and ce full bright from an AA battery ?

gadget

lol

wonderful


im gonna unwind my 808 and play too!!  lol

ist!

sorry for all the post i just got a little spun ...  lol  tommorow i will make a few coils on the W 140mm
To understand the action of the local condenser E in fig.2 let a single discharge be first considered. the discharge has 2 paths offered~~ one to the condenser E the other through the part L of the working circuit C. The part L  however  by virtue of its self induction  offers a strong opposition to such a sudden discharge  wile the condenser on the other hand offers no such opposition ......TESLA..

THE !STORE IS UP AND RUNNING ...  WE ARE TAKEING ORDERS ..  NOW ..   ISTEAM.CA   AND WE CAN AND WILL BUILD CUSTOM COILS ...  OF   LARGER  OUTPUT ...

CAN YOU SAY GOOD BYE TO YESTERDAY?!?!?!?!

Pirate88179

IST:

Thanks man.  I am still working on it though.  I hope it works.

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen