Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Solid State Orbo System

Started by Groundloop, January 06, 2010, 12:21:24 PM

Previous topic - Next topic

0 Members and 13 Guests are viewing this topic.

Print
Go Down Pages 1 ... 97 98 99 100 101 ... 148
User actions

Omega_0

#490
March 10, 2010, 04:19:48 PM
Quote from: lumen on March 10, 2010, 08:27:57 AM

Why would the flux leaving the core during the coil on time be such a problem?


Let me clear it. Flux should leave the core at on time, it is not a problem.

Now how much flux should couple with the pickup and how much should remain ? This is the question. Ideally, one would want all of the flux to leave the core and couple with the pickup windings, not only half of it, to induce max power.

I'm sorry, I could not come up with any clever ideas on this today (except the one for placing the core such that the hole faces the PM instead of edge on).

Perhaps the best designs are those posted very early in the bigger steorn thread.
I have more respect for the fellow with a single idea who gets there than for the fellow with a thousand ideas who does nothing - Thomas Alva Edison

gravityblock

#491
March 10, 2010, 05:11:11 PM
Quote from: exnihiloest on March 10, 2010, 04:23:23 AM
Your reply is the proof that you, not me, is bothered with cooling. You spoke the first, not me, about cooling in this thread.
For me there is no cooling so I'm not bothered!
If I detect one in the future, I will inform you.  ;)

Bruce spoke first about the cooling effect in this thread, not me.  Why would I be bothered with the cooling, when I think it's a good effect?  You on the other hand believe there is no cooling, so you are bothered with these reports because it is in disagreement with what you believe and it would be an indicator of excess energy in this setup, which you are also against.

GB
Insanity is doing the same thing over and over again, and expecting a different result.

God will confuse the wise with the simplest things of this world.  He will catch the wise in their own craftiness.

gravityblock

#492
March 10, 2010, 05:29:48 PM
It doesn't matter if the flux leaves the core or doesn't leave the core at on time, because the pickup coil is open circuit during the on-time of the pulse, thus if there is flux leakage due to saturation during the on-time, it's not inducing an EMF in the pickup coil.

GB
Insanity is doing the same thing over and over again, and expecting a different result.

God will confuse the wise with the simplest things of this world.  He will catch the wise in their own craftiness.

gravityblock

#493
March 10, 2010, 05:51:57 PM
I wonder what the results would be with partially demagnetized magnets.  Steorn's patented measuring device mentions the testing of partially demagnetized magnets.

GB
Insanity is doing the same thing over and over again, and expecting a different result.

God will confuse the wise with the simplest things of this world.  He will catch the wise in their own craftiness.

Bruce_TPU

#494
March 10, 2010, 08:40:12 PM
Good evening ALL,

I found what I hope will be the perfect form for my first bias experiment.  It is plastic.  Later I will try the metal.

Now it is time to wind it, with three layers.

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 ... 97 98 99 100 101 ... 148
User actions