New permanent magnet motor on youtube from Roobert33

[roobert33]

Da come si può osservare, i tondini sono di alluminio.
Essi non sono nè magneti, nè ferrite.
Il magnete grande sopra alla staffa è fatto di legno colorato grigio.
Il magnete piccolo in basso è fatto di legno colorato grigio.
Il peso di ottone serve a bilanciare il peso del rotore.

Questo mio "V-gate" l'ho realizzato in due giorni, circa 9 ore totali, appositamente per dimostrare che quello che io ho scritto nella mia confessione è vera ed ancor più che "sono Italiano".

Io non invierò un nuovo video del "V-gate" a YT, io vorrei evitare nuove polemiche e critiche da parte di utenti di YT.

"Mi auguro che queste mie foto soddisfino i vostri dubbi ed incertezze, io più di questo non posso fare".
               
@ Scorch,
da come hai notato, io sono apparso quì sul Forum per la prima volta dopo un anno. C'è una spiegazione a tutto questo, i motivi sono tre:

1° Da molto tempo mi premeva far sapere che "Roobert33 è Italiano", mentre l'altro uomo "Robert  è del Texas"

2° Io volevo anche a far sapere come veramente erano andati i fatti riguardante la mia storia del soffio dell'aria compressa che faceva girare il "V-gate" e che tutto non era altro che uno scherzo ideato da me.

3° Fino ad ora io non avevo mai visto quì sul Forum una persona come te ad impegnarsi seriamente e con passione con un "V-gate". Questa è anche la ragione per cui io sono quì sul Forum a complimentarmi per con te e dirti di non abbandonare mai la tua bella idea di realizzare un congegno che funzioni veramente.
Vai sempre avanti in ciò che credi...


P.s.
Da anni io cerco come te di far funzionare un "V-gate", ho realizzato molte prove e tentativi con molle di bilancio, con leve a slitta, con camme, con contrappesi, con ingranaggi e cinghie. Ma, purtroppo, alla fine l'esito è sempre lo stesso, il rotore non riesce mai a fare il giro completo...

Un caro saluto!

                                                    ======================================================================
As you can see, the rods are made of aluminum.
They are neither magnets or ferrite.
The big magnet on top of the bracket is made of colored gray wood
The small magnet at the bottom is made of colored gray wood.
The brass weight serves to balance the weight of the rotor.

I made my "V-gate" in two days, about 9 hours in total, designed to prove that what I wrote in my confession is true and even more that I am "Italian."

I didn't send a new video of the "V-gate" to YT, I would like to avoid further controversy and criticism from users YT.

I hope these my photos meet your doubts and uncertainties, I can not do more than that.
                                                                                       
@ Scorch,
from what you've noticed, I have appeared here on the Forum for the first time after one year. There is an explanation for all this, the reasons are three:

1) By a long time I wanted to let you know that "Roobert33 is Italian," while the other man "Robert is in Texas"

2) I wanted also to say you how the facts really went about my history of blowing compressed air that was running the "V-gate" and that everything was just a joke created by me.

3)  Up to now I had never seen here on the forum a person like you to engage seriously with passion with a "V-gate". This is also the reason why I am here in the Forum to compliment with you and tell you to never leave to realize your beautiful idea of a device that really works.
Go ahead in what you believe ...


P.s.
For years I try to run a "V-gate" like you, I made many tests and trials with spring budget, with levers to slide, with cams, with counterweights, gears and belts. But, unfortunately, in the end the outcome is always the same, the rotor can never do the full tour ...

A dear greeting!   


                             

[roobert33]

.

[Arrow]

P.s.
For years I try to run a "V-gate" like you, I made many tests and trials with spring budget, with levers to slide, with cams, with counterweights, gears and belts. But, unfortunately, in the end the outcome is always the same, the rotor can never do the full tour ...

A dear greeting!                             

Un caro saluto!
Rob
Ð"ля меня все ясно! "РооберÑ, 33" Ñ,Ñ‹ мог все исправиÑ,ÑŒ у Ñ,ебя был шанс!Ð'удь здоров не кашляй, успеÑ...ов Ñ,воей семье.
Ты все прочиÑ,ал , я все сÑ,ер, кÑ,о предупрежден Ñ,оÑ, вооружен уважаемый! ИграйÑ,есь дальше с Ð'ашим именем.ПусÑ,ÑŒ будеÑ, вам сÑ,ыдно:)
http://www.translate.ru/

[Scorch]

Thank you for the images, these do help, but, Roobert33, please forgive me as I see no verifiable proof of your claim, I am still not convinced, and still question your motives.

There are many things here that are not same as the original video including the shaft, the shape of the cam, the appearance of the rods and the magnets which appear to be a total mockup of the real thing likely assembled (or reassembled) recently.
Including spray painted wood in place of the real magnets which have a highly reflective surface in the original video.
And, BTW, I see the Italian style outlets on your equipment.

But, then, there are OTHER things that are VERY similar to the original video including the color of the backdrop, the shape and construction of the rocker, and even your hand!
But, as I have already pointed out, even if you have the original motor, and that motor is fully functional, its still possible to give the APPEARANCE of fraud.
But for what motive? Why go through all this trouble NOW? What drives you to reassemble and represent the fraud you claim to have been involved with a year ago?

Is it really just because I recently appeared here and gave my two cents?
I do not know the answers to these questions and can only speculate.
And its all irrelevant to my own efforts anyway.

So I am at a complete loss as to what to think and unable to take any position about what appears to be a false flag misdirection. . .

Time for me to show my hold card:
My very limited relationship with Mr. Robert Calloway goes all the way back to the flying dutchman projects when, about 17-18 years ago, I made my first real attempt to build a magnetic motor in the form of the Bowman motor.
See: http://www.fdp.nu/bowman/default.asp

Mr. Calloway appeared to be the primary builder on this project and he only saw me as "R. Graff" trying to build the same thing and it wasn't long before I gave up on that project in favor of other pursuits such as the helix rotory, pulsed DC systems, Marko Rodin's vortex math and rodin coils, etc.
(see "builder reports" and "follow up" for my (R. Graff) project picture and report.)

And BTW, this site ALSO has a page titled: "V-gate motor
designed by Robert Calloway" at: http://www.fdp.nu/v-gate/default.asp

My youtube page:
http://www.youtube.com/user/ScorchGD
My contractors page:
http://www.rodscontracts.ws/
My anthropomorphic art enthusiast page:
http://www.furaffinity.net/user/scorch/
(includes project images and journals)

And, so, here's the deal; in addition to Steve, at PESN, personally talking to Mr. Calloway I ALSO, personally spoke with Mr. Calloway about three weeks ago merely to ask: Where can I find shiny ferrites?
And in that short, telephone, conversation I heard him say (hearsay) the following:
#1 He was involved with invention and construction of this motor.
#2 The ferrite rods were nickel plated merely for appearance.
#3 He sold the design. (to an Italian???)
#4 He is under contract which includes a non-disclosure agreement regarding the design specifics.

I informed him that I have a fair understanding of contract law and that I respect his non-disclosure agreement and I did not ask him anymore questions.
The conversation was about about 3 minutes long and I have no intention of bothering him anymore on this subject.

The status of my current replication attempt is: Still moving forward.

I found some stainless steel wood screws at the hardware store in Denver and picked up some scraps of brass at Uhric locomotive in Strasburg.
Be advised I am very lazy, have many other things to do, and I'm taking my time building this project the way I think it should be built.
So it may be a few weeks before I have anything new to report.

And, Mr. Arrow, you have presented a lot of questions for me.
I will try to address a few of these when I have more time to sort through all this.
Thank you very much for your support and I do have love and appreciation for what you are doing and hope your efforts will be successful.

Scorch G. Dragon
(A.K.A. Rodney-Brian  Graff)

}:>

.

[Arrow]

}:>

Dear Scorch I did not understand this #3 He sold the design. (to an Italian???)
can you explane it?