The Gabriel Device, possible COP=8

[matthewklinko]

Hey mav thanks for the input

Can you tell me what your no load primary current is?
Do you still run a series load with the primary to limit curent?

Thanks

Matt

I do everything counterclockwise. your shell must be rather thin for a PF of 1 or really close to the innercore, I can get pf down to .07 without much of a problem so don't know what to tell ya. As well Im useing a variac to control my input now days and a amplifier may not be the input of choice for these experiments.

[SchubertReijiMaigo]

I do everything counterclockwise. your shell must be rather thin for a PF of 1 or really close to the innercore, I can get pf down to .07 without much of a problem so don't know what to tell ya. As well Im useing a variac to control my input now days and a amplifier may not be the input of choice for these experiments.

You mean, the thinner shield closer the PF to 0 !?
So, an iron sheet would be better...
Mine was about 2 milliters...

[Mavendex]

You mean, the thinner shield closer the PF to 0 !?
So, an iron sheet would be better...
Mine was about 2 milliters...

Thicker = 0 Thinner = 1 as far as I can see

I use a variac as the primary source of input not other load in series, so basicly I can make what ever amperage I wish to be input with no load or load on the secondary.

With a load in series with the primary I was able to get it well under a amp. but that was 3 months ago and alot has been learned since then.

To completely defeat reflections intermediate shorted turn on top of the secondary, if you do this your voltages will be diminished so you will have to increase your secondary turns to overcome this, with a pf of 0 and defeating lenz effect you should be able to get very good outcomes.

Im working on a couple of electronic components to add to the device a ultra cap to add to the shorted turn to add more of a battery effect, and a resistive component to the shell to cheapen the input cost. I go on vacation on Wednesday so this will be my last entry till I return, good luck and god speed.

Mav

[SchubertReijiMaigo]

Thanks very much for this input !!!
For now I wait for oscillo and play around with my version.
I have made a youtube video of my current version (the same I have presented here 2 months ago)...
I think it's important to start to promote the device, maybe inciting many people to replicate and improve the device...
http://www.youtube.com/watch?v=Pg0BzIEQPYY

And happy holidays , after all this work you have done it's fully merited !!!

[Hope]

Mav,  have you tried finer gauge more turns on Primary and then heavy gauge less turns on Secondary?  If so what was your findings?   

Are M 427 coils worth trying, three of them?

And Goldmine Electronics are selling a couple different variacs for decent prices.

Service Project update:  I can't build this week, winter comes and her heat is not in yet.  So be back as soon as I remedy it.
The lady is in her 70's so I must help her till I am finished or she made get ill.

Thanks Daniel for your being here.