Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Trawoeer Power Pyramid Version 12 - Electrical output from a homemade pyramid

Started by hartiberlin, June 28, 2011, 04:05:30 PM

Previous topic - Next topic

0 Members and 16 Guests are viewing this topic.

Print
Go Down Pages 1 ... 77 78 79 80 81 ... 102
User actions

k4zep

#390
August 20, 2011, 04:09:51 PM
Hi All,

Spent part of yesterday, and most of today, messing, measuring, adding a top suspension point, epoxy here, epoxy there, measuring some more, picture below is of a trial fit.  Bottom of CAP is not cut yet to fit.  Have to put the X lines to be sure centered, also going to put a front to back parallel line to sight the compass for true north also off to the side. 

Note the base that is red that the unit sits on.  Never showed that before.  It stabilizes the Pyramid, corners are steel reinforced for more stability and to keep it true, Glued and screwed together.  Also added front stringers to strengthen and keep the pyramid true.  A lot of piddle stuff to finish it right.  Almost there now.  Have to make a "travel box" to keep the reactor vertical when I am transporting it.

I wonder how many out there are actively building/testing a Pyramid?

Respectfully
Ben K4ZEP

GPS25

#391
August 21, 2011, 12:05:55 AM
here are some of my findings for Thoma's Project,Brass Tap Fittings and from the Pet Shop very fine high quality quartz sand.I wonder for those who have found big granule quartz sand if they can use coffe grinder to refine it.Also Brass can be TIG welded using brazing rods.

GPS25

#392
August 21, 2011, 02:39:59 AM
Quote from: DiegoPalma on July 26, 2011, 01:42:34 AM
Capacitor

For the capacitor I used a 20mm x 525mm plastic water PVC pipe with two coils of 11 meters each of the 16 AWG 1.5mm copper cable. I add 10cm to each endings on both coils to connect and synchronize the capacitor.

I cut the endings and mount it in the pyramid to keep the reactor in the exact center of the pyramid as Thomas indicated.

Charging the reactor

The voltage in my country (Peru) is 220v. Here comes the tricky part. I decided to go for the high voltage charging instead of the High Radio Frequency way since my understanding of electronic and RF is limited. I found a high voltage DC transformer made from a fly-back. It makes 20,000 volts (that’s what the seller told me but I couldn’t prove it). I bought a multimeter and there is a warning to do not attempt to measure a circuit if the voltage is grater than 60v DC so I do not know neither the exact amps that are coming out of the transformer, but when I bring the terminals closer than 30mm they make a nice flow of lightning current between (sorry for my English).

I went to a swimming pool service and found two different brands of filter quartz sand. One is Crystaline Silica from Southern Products Silica C.O., INC (first picture) and the second one is a Peruvian brand (more expensive) and is made of ground quartz (second picture). I bought both.

I am going to use the first one since it is more similar in color to what Thomas showed in his video. (The second one is white and irregular in size but I have a 1.5mm frame to filter it if necessary)

That’s all for now. I will wait for your suggestions before going into the next step.
I read that the transformer need to be AC output and between 3 to 7 kilovolts but I have read different approaches and changes of mind in the last days that I am not sure anymore. I hope Thomas can give me the right approach.

Thank you Pascuser for the dowsing articles I would studied them and applied them in my yard. I live in Pisaq, a small town in the Sacred Valley in Cusco (2 hours from Macchu Picchu) at 3,000 meters high (11,000 feet aprox) and  and there is a lot of water underground.

I hope Ben, Matsatbg, Smoky, Pascuser, Duff, Jimboot, Neptune, me and all the rest together can replicate the power pyramid soon with the help of Thomas.

Waiting for your comments...

Diego
have you try this quartz sand from a petshop?I will post you my findings as well.Might be helpful.Regards George

k4zep

#393
August 21, 2011, 12:57:23 PM
Hi All,

Found this little fan at the flea market this morning on our weekly visit for vegetables.

Very small, will run down to 2.8VDC @ 20 ma.  Top end is 5V I think as it came off a video card.

Respectfully
Ben

Print
Go Up Pages 1 ... 77 78 79 80 81 ... 102
User actions