Confirming the Delayed Lenz Effect

[DeepCut]

synchro i'm having serious doubts about this 'magnet as a core'.

Both of my tube magnets are 0.6 Tesla, even having them sitting four inches apart would make it impossible to spin up the rotor magnet.

You have tried this yourself, haven't you ?


atb,

DC.

[Heinstein]

A MESSAGE FROM THANE HEINS (I'll remove this one if the moderator doesn't censor me?)

Hello All,

Please allow me to take a moment of your time to set the record straight...

There is no such thing as "THE DELAYED LENZ EFFECT."

The "effect" is actually called REGENERATIVE ACCELERATION or ReGenX GENERATOR INNOVATION (some also refer to it as the HEINS EFFECT with respect to the original discoverer) and it was developed by yours truly, Thane Heins from 1999 to 2008 and rose from my desire to create a new energy innovation that would end the "need" for oil wars. The ReGenX Innovation was developed on a steady diet of Blood, Sweat and Tears and often all three simultaneously.

The ReGenX innovation was introduced to the world at MIT and then Ottawa University (naively and honestly as the Perepitea Generator) via a newspaper article written by Tyler Hamilton and published by the Toronto Star who deliberately and cleverly included the "Perpetual Motion" notion to mislead and stir up readers emotions in order to sell more advertising - which they did very well because the article was one of the top articles that year (although totally based on a false premise).

At Ottawa University the Regenerative Acceleration innovation's development was assisted greatly by Luc Choquette (and his own blood, sweat tears and sore back), Owen Charles, Saverio Panetta, Bill and Ellen Costantino and many, many others - who were ALL God sent and indispensable, who helped move the innovation in their own way from one stage to another until we achieved the final goal and with both the ReGenX innovation and the BiTT and was promptly expelled from our satellite lab at OU (Ottawa University) after being slandered, locked out of our lab, physically assaulted, threatened and had 3 prototypes sabotaged.

There has been much false and predominantly ignorant criticism of the innovation over the years - which have all been proven false and baseless but some still exists today (below)...

Nevertheless the ReGenX Innovation is currently being embraced and commercialized by 8 different companies worldwide and updated patents have been filed - so it is ready to move to the next stage of its evolution - or revolution into the mainstream market and commercialized.

Those of you who have been able to successfully create a generator that has the ability to accelerate under load - you have ALL created Over-Unity devices - Congrats!, ignore what any ignorant naysayer may claim.

Thanks
Thane

Thane C. Heins
President & CEO
Potential +/- Difference Inc. R & D
"Change catalysts using our potential to make a positive difference"
Email: thaneh@potentialdifference.ca 
Cell: 613.795.1602
YOUTUBE http://www.youtube.com/user/pdicanada1 
Linkedin http://www.linkedin.com/profile/view?id=107557432&trk=tab_pro
slideshare http://www.slideshare.net/ThaneCHeins 


HERE IS YOUR ("INGNORANCE IS NOT BLISS") LESSON FOR THE DAY BOYS AND GIRLS...   

Cheers
Thane

-------- Original Message --------
Subject: ReGenX and Impedance Matching...
From: Stefan Hartmann hartiberlin@gmail.com 
Date: Mon, March 18, 2013 8:09 pm
To: thaneh@potentialdifference.ca,     

Hi Thane,
to me "impedance matching"  also means:   

DEAR STEFAN,   

WHAT IT "MEANS" TO YOU IS IRRELEVANT SINCE,   

EVERYONE IS ENTITLED TO THEIR OWN OPINIONS - BUT NOT THEIR OWN FACTS. ~ Daniel Patrick Moynihan

Reducing the load on the input power by matching the right load at the output...
Exactly this you are doing...   

NOT TRUE AT ALL (AND THIS IS A FORM OF MALICIOUS SCIENTIFIC SLANDER BASED IN IGNORANCE WHICH SHOULD NOT BE TOLERATED), AND WOULD BE A VIOLATION OF THE OVER UNITY FORUM TERMS OF USE IF SHARED: "You agree, through your use of this forum, that you will not post any material which is false, defamatory, inaccurate"...   

SINCE A DEAD SHORT IS AN INFINITE LOAD AND YOU CAN'T GET A HIGHER LOAD THAN THAT. AND THE ReGenX GENERATOR CREATES THE MOST ACCELERATION WITH A DEAD SHORT (IE AN INFINITE NUMBER OF LIGHT BULBS (LOADS) CONNECTED IN PARALLEL) AND WORKS BEST WITH PURELY RESISTIVE LOADS.   

THE "IMPEDANCE MATCHING" IDEA IS COMPLETLY FALSE, INACCURATE AND PURE BALONEY!   

THERE IS NO IMPEDANCE MATCHING HERE: http://www.youtube.com/watch?v=IgHFhNMkDiw&list=PLkH1zLdXy1SypPD7inxAYi8MjkQk91syC&index=1

OR HERE: http://www.youtube.com/watch?v=SCRx9MW-a7M&list=PLkH1zLdXy1SypPD7inxAYi8MjkQk91syC

OR IN ANY OTHER ReGenX TEST AND THE ONLY VATIALBE THAT IS CHANGED IS THE OPERATING FREQUENCY OF THE ReGenX COIL AND THE LOAD STAYS THE SAME (ALWAYS)!

But you don´t yet get more power out than in.   

YES WE DO (ANOTHER FALSE AND INACCURATE STATEMENT BASED IN IGNORANCE) AND I EXPLAIN WHY BELOW... TO THOSE WHO ARE EDUCATED ENOUGH TO COMPREHEND IT WILL BE CLEAR.   

I ALWAYS FIND IT AMAZING THAT THE FOUNDER OF AN OU FORUM CAN'T EVEN SEE OU WHEN IT HAS BEEN STARING HIM IN THE FACE FOR OVER 5 YEARS.

If you are still using your yellow motor for testing and still no flywheel, you will not see, if you can raise the RPM on the purely passive flywheel by appling your Regen-X coil load...

Only this test would be valid and will show, if adding your Regen-X system will not drag the Flywheel RPM totally down over time.   

NO IT WILL NOT (AND AGAIN MORE IGNORANCE)...   

SINCE THERE IS NOT A SINGLE CORE MATERIAL ON THE PLANET THAT DOES NOT PRODUCE SOME SORT OF HYSTERESIS EFFECT (MAGNETIC DRAG), AND REMNANT FLUX IN THE CORE REQUIRING ADDITIONAL DRIVE SHAFT COERCIVE FORCE TO EXTRACT IT. (THE COMPANY THAT CREATES ONE WILL RULE THE WORLD BTW)   

THE ReGenX GENERATOR OPERATES ON THE VERY SAME PRINCIPLE AS DO ALL GENERATORS I.E. COILS WITH CORES - SO IN THAT SENSE IT IS EXACTLY IDENTICAL TO ANY OTHER GENERATOR ON THE PLANET (THAT HAS CORES). 

HYSTERESIS, REMNANT FLUX, AND DRIVE SHAFT COERCIVE FORCE REQUIREMENTS WILL ALL BE DEALT WITH IN THE DESIGN AND MANUFACTURING PROCESS IN A COUPLE OF MONTHS.

So putting a Regen-X system on any motor will just need additional input power, cause your coil rods are dragging the motor down.   

WE DON'T USE "RODS" WE USE M3 AND ABOVE FERROMAGNETIC LAMINATIONS TO MINIMIZE CORE HYSTERESIS AS DO ALL GOOD GENERATORS AND MOTORS ON PLANET EARTH.

Why aren´t you just doing the run test on your E-Bike ?   

WHO SAYS WE ARE NOT?   

Just let the E-Bike run WITHOUT the Regen-X system and see how long the 36 Volts batteries will last and the attach again the Regen-X system and let the bike again run the 36 Volts Battery pack run down by recharging the 36 Volts battery pack from the output of your coils.   

THE 24 COILS ON THE INFINITE RANGE eBIKE PROJECT WILL DELIVER A MINIMUM OF 384 WATTS OR 16 WATTS/COIL.   THE BIKE MOTOR WILL CONSUME A MAXIMUM OF 360 WATTS.   

ONCE COMPLETE THE INFINITE RANGE eBIKE WILL RUN "FOREVER" AS PLANNED JUST AS WE DID AT OU (OTTAWA U WITH THE BYONX eBIKE).   

As you already have all the parts in place, why don´t you do these tests ?
Regards, Stefan.   

MORE IGNORANCE AND MORE FAULTY ASSUMPTIONS - ALL THE PARTS ARE NOT IN PLACE...   

ALL 24 COILS HAVE TO BE REWOUND AND 2 MORE ROTORS HAVE TO BE MADE AND INSTALLED WITH 2 NEW COIL JIGS ETC.
       

THE DIFFERENCE BETWEEN OVER-UNITY AND PERPETUAL MOTION     

BELLOW IS THE CORRECT WAY TO EVALUATE ANY ELECTRIC GENERATOR:   

AN ELECTRIC GENERATOR IS A DEVICE WHICH CONVERTS MECHANICAL POWER (IN A DRIVE SHAFT) INTO ELECTRICAL POWER.   

THE INPUT TO THE GENERATOR IS THE MECHANICAL POWER IN THE DRIVE SHAFT WHICH IS EQUAL TO THE TORQUE X THE SPEED.   

THE OUTPUT IS THE ELECTRICAL POWER DELIVERED TO THE LOAD.     

ALL GENERATORS ARE EVALUATED (EFFICIENCY WISE) BY WHAT HAPPENS AFTER THEY ARE PLACED ON-LOAD NOT BEFORE (DURING NO-LOAD).   

FOR EXAMPLE:   

THE HYDROELECTRIC GENERATOR ON THE RIVER IN OUR TOWN REQUIRES 500 KW OF MECHANICAL DRIVE SHAFT POWER JUST TO IDLE ON NO-LOAD!     

A LARGE WIND TURBINE WOULD BE EVEN WORSE AND REQUIRE EVEN MORE NO-LOAD IDLING ENERGY AND OFTEN THE WIND TURBINE'S GENERATOR IS USED AS A MOTOR TO BRING THE BLADES UP TO SPEED. ALSO OFTEN DONE TO TRICK THE TOWN FOLK WHEN THE WIND IS LOW BUT THE PEOPLE WANT TO SEE THEIR TURBINE TURNING INSTEAD OF SITTING IDLE.   

A DIESEL MOTOR WILL POWER A LARGE GENERATOR ON NO-LOAD WITH A LARGE FUEL CONSUMPTION - WITH ZERO POWER IN THE DRIVE SHAFT, ZERO GENERATOR OUTPUT AND ZERO EFFICIENCY.   

THE IDLING NO-LOAD MECHANICAL ENERGY REQUIREMENTS ARE NEVER EVER PART OF THE EFFICIENCY CALCULATION. IF THEY WERE MOST GENERATORS WOULD BE LESS THAN 10% EFFICIENT AND THIS IS NOT THE CASE.   

IT IS THE ON-LOAD MECHANICAL ENERGY INPUT INCREASE REQUIREMENTS THAT ARE IMPORTANT NOT THE NO-LOAD IDLING PRIME MOVER POWER CONSUMPTION.   

I.E. A GENERATOR THAT DELIVERS 0.8 WATTS TO THE LOAD WITH A 1 WATT INCREASE IN ON-LOAD MECHANICAL DRIVE SHAFT POWER OVER THE NO-LOAD STARTING POINT IS 80% EFFICIENT - EVEN THOUGH THE NO-LOAD MECHANICAL ENERGY INPUT MAY BE 500 KW AND THE TOTAL INPUT 500,001 WATTS WITH AN OUTPUT OF 0.8 WATTS!   

SO IF YOU HAVE A GENERATOR THAT ACCELERATES ON-LOAD ANY LOAD (AND YOU ARE NOT SOMEHOW REDUCING NO-LOAD MECHANICAL LOSSES IN THE PROCESS THEN YOU HAVE OVER-UNITY) CONGRATULATIONS!   

SATURATING THE CORE AND REDUCING ROTOR FLUX PENETRATION WOULD BE A FORM OF NO-LOAD LOSS REDUCTION BECAUSE THE HYSTERESIS EFFECTS WOULD BE REDUCED (BUT THE CORE WOULD QUICKLY OVERHEAT AND FAIL)   

AS WOULD LEVITATING THE GENERATOR OFF THE BEARINGS OR SUPERCONDUCTING YOUR COILS ETC. WHEN PLACING IT ON-LOAD.
BTW THE NET MECHANICAL INPUT POWER TO ANY GENERATOR AT ANY STEADY STATE SPEED IS 0.00 WATTS BECAUSE THE NET TORQUE WILL ALWAYS BE ZERO AND MECHANICAL INPUT POWER = TORQUE X SPEED.   

IF THE SYSTEM ACCELERATES ON-LOAD THEN THE MECHANICAL DRIVE SHAFT POWER INCREASES (OVER THE NO-LOAD STARTING POINT) + THE LOAD POWER ADDED TOGETHER ARE MORE THAN THE NO-LOAD STARTING POINT ... THE GENERATOR IS OVER-UNIY ALTHOUGH NOT PERPETUAL MOTION.     

IF YOU CAN DELIVER SUSTAINED POWER TO A LOAD (OR LOADS) WITH A REDUCTION IN NO-LOAD IDLING INPUT POWER REQUIREMENT THEN EVEN BETTER.     

ANY GENERATOR THAT CAN DELIVER 1 WATT OF ELECTRICAL POWER WITH ONLY A 1 WATT INCREASE IN MECHANICAL DRIVE SHAFT INPUT POWER INCREASE (OVER THE N0-LOAD STARTING POINT) IS 100% EFFICIENT.   

IT GOES UP OR DOWN FROM THERE... NOT HAVING TO INCREASE THE MECHANICAL INPUT WHILE DELIVERING 0.0000000000000000000000000001^N=INFINITY WATTS IS OVER-UNITY.     

THE ReGenX GENERATOR DELIVERS 1 WATT OF ELECTRICAL POWER TO ITS LOADS + AN INCREASE IN MECHANICAL OUTPUT WITHOUT AN INCREASE IN DRIVE SHAFT MECHANICAL INPUT POWER AND INCLUDES A REDUCTION IN PRIME MOVER INPUT.   

PERPETUAL MOTION IN THIS CASE REQUIRES AN OVER-UNITY GENERATOR CONFIGURATION WHEREBY THE ELECTRICAL OUTPUT EXCEEDS THE ELECTRICAL INPUT POWER AND ALL THE RESISTIVE LOSSES IN THE SYSTEM WHICH IS A TALL ORDER BECAUSE THE RESISTIVE LOSSES INCREASE AS SYSTEM SPEED INCREASES     

BUT IT CAN AND HAS ALREADY BEEN DONE AND WILL BE DONE AGAIN.     

REGARDS Thane
ps
THE DAY I CREATED A PERPETUAL MOTION MACHINE AT OTTAWA UNIVERSITY (ATTACHED)

[DeepCut]

Very well said Thane.

Does this mean that i am going to rule the world ?


All the best,

DC.

[conradelektro]

Among a ton of words Mr. Thane C. Heins writes:

----------------------------------------------------------------------------------------------------------
THE 24 COILS ON THE INFINITE RANGE eBIKE PROJECT WILL DELIVER A MINIMUM OF 384 WATTS OR 16 WATTS/COIL.   THE BIKE MOTOR WILL CONSUME A MAXIMUM OF 360 WATTS.   

ONCE COMPLETE THE INFINITE RANGE eBIKE WILL RUN "FOREVER" AS PLANNED JUST AS WE DID AT OU (OTTAWA U WITH THE BYONX eBIKE).   
-----------------------------------------------------------------------------------------------------------

I am not a native English speaker but as far as I understand, the alleged OU may be WILL HAPPEN, i.e. may be the case in the future.

Someone will have proven OU once it HAS HAPPENED.

So, lets wait and watch.

The only OU devices I have ever heard of WILL be OU after some improvements. And REGENERATIVE ACCELERATION seems to be in a similar category of OU devices.

It is good to experiment with this effect, but it is pretty unproductive to call it OU without factual proof. Proof by definition (as Mr. Heins attempts) is not very helpful. Words rarely deliver energy, words just deliver a small amount of warm air (in case they are spoken and not written down).

So, let's experiment. Bragging, claiming of rights, name giving and saving of the world should be delayed till proof materialises.

Greetings, Conrad

[synchro1]

synchro i'm having serious doubts about this 'magnet as a core'.

Both of my tube magnets are 0.6 Tesla, even having them sitting four inches apart would make it impossible to spin up the rotor magnet.

You have tried this yourself, haven't you ?


atb,

DC.

I get tired of repeating myself. You need to run the rotor up first past threshold speed, then position the magnet core coil. You've made it much more difficult for me to keep explaining this to you then it would be to try it. I'm tired of your insults. This is my final response to you.