Modified Heron's Fountain

[TinselKoala]

Facepalm. If only this, if only that, can't afford this, they are keeping you from that.... and  "you must be financially independent TK" ..... you are indeed a fool, can't even write your own script. Too bad you can't stand on your own two feet--- you'd make a fair standup comic.

It's very convenient for you that you can't do anything but whine. Because if you ever DID get out of bed and build one of your silly "ideas" you'd find out how wrong you really are. But that won't stop you, will it. You probably have more silly non-workable ideas in a day than I do in a week. Why don't you go do some research for a change, since you are incapable of doing any work.

Here's something mechanical I built a long time ago, and I'm showing it here just to refute your silly accusations and assumptions about me. Machined to tolerances of 0.0001 inch, every bit made by me from metal stock, runs on a very small pressure differential of 2 psi, illustrates a clever mechanism. No levers? Awwww.... shucks.  Let's see your levers then, Jimbo.

http://www.youtube.com/watch?v=KeyHiEpT6ZU

[johnny874]

  you know what I like about you ? You are showing the way some people are about.
And as you say, if I have more than one idea, I must be the Second Coming of Jesus, after all, you think you that smart.
One thing I do that you won't is discuss other peoples ideas with them.
That is the problem with people like, you have to screw someone over because you want everyone to think you have some thing going on which if you didm you wouldn't be bothering me.
like say, I can't work according to my situation but should answer to you when you don't know crap about engineering or the build I want to do. This means you're another jerk just like Alan,

[johnny874]

tinselkoala, you are slippery as a snake. you show you machinec someting and alan would show his armor.
if you machined it to the tolerance you claim, doubt it was done on a used mill. everybody knows mills develop twice your tolerane in play because metal does wear.
I think you're full of shit.
If you want to refute what I say, discuss engineering but I know you're not capable of that.
it's like alan always told me, it's all about who's more aggressive anc rhat's all you got.

[TinselKoala]

tinselkoala, you are slippery as a snake. you show you machinec someting and alan would show his armor.
if you machined it to the tolerance you claim, doubt it was done on a used mill. everybody knows mills develop twice your tolerane in play because metal does wear.
I think you're full of shit.
If you want to refute what I say, discuss engineering but I know you're not capable of that.
it's like alan always told me, it's all about who's more aggressive anc rhat's all you got.

The poor mechanic always blames his tools. And you have just revealed how poor you are. Accuracy is in the machinist, not the machine. You have no idea what you are talking about and you are calling me a liar and saying that I am full of shit. And in another thread you accuse ME of stalking YOU! What a paranoid, deluded individual you are.

That little Scotch Yoke motor wouldn't even turn if it didn't have the accuracy and precision I stated. IT RUNS ON 2 PSI. You call me a liar and tell me I'm full of shit......  I tell you to produce something, ANYTHING, comparable at all. But you cannot. You are just a talker, and not a very good one either, because whenever you are challenged or shown to be wrong, you fall back on your tried and true tactic: You insult, lie, and start blaming other people for your own inability to perform.

I am indeed capable of discussing engineering -- and the people who issued me my degrees and certifications agree with me on that little matter --  mister "Cubic inches of surface area", but there is no point in doing it with you, because you don't even have the necessary common language and you refuse to educate yourself. Your silly sketches have nothing to do with engineering and any bright ten year old can tell you at a glance that they won't work. None of them ! And if you knew how to calculate moments and arms, torques and forces, pressures and volumes, energy and momentum,  you'd see it for yourself. But you cannot. Cubic inches of surface area! Three times in two separate posts, and NOT a typo! Cubic inches per inch !!!

We know you can't build anything. We know you can't do math. We know you don't understand machining, or machine tools. All you really seem to be able to do is to insult people and lie about them. But you don't even do that very well, since your insults and lies are so easily refuted with facts and references and demonstrations.

[johnny874]

The poor mechanic always blames his tools. And you have just revealed how poor you are. Accuracy is in the machinist, not the machine. You have no idea what you are talking about and you are calling me a liar and saying that I am full of shit. And in another thread you accuse ME of stalking YOU! What a paranoid, deluded individual you are.

http://www.overunity.com/12640/herons-fountain/15/#.UEOTqnmYTTo
reply 23 to pirate88719.
here's a way you might try it Bill, just trying to be helpful.

http://www.youtube.com/watch?v=Z5LpJAR3cM0
his reply to me, reply #28
TK and all:

I have old Johnny on ignore and can't see what he is posting...I am sure I am not missing much.  Ignore is such a great feature.
tinselkoala's "build", http://www.youtube.com/watch?v=AlLYD4CSJLU
and if you look at the 4:00 minute mark, he doesn't explain why adding the straw to the outlet tube slows down the flow of water almost enough to stop it.
And what I posted , reply #27;
TK,
the reason the flow slowed so much when you put the straw on the discharge tube is because the weight of the static head increased. but with what I drew, only one chamber is necessary because of a barrier which can be over flowed. that is what would allow for it possibly going perpetual.

  And what tinselkoala is now saying;
We know you can't build anything. We know you can't do math. We know you don't understand machining, or machine tools. All you really seem to be able to do is to insult people and lie about them. But you don't even do that very well, since your insults and lies are so easily refuted with facts and references and demonstrations.

  The attached pic is a build I could finish if I felt like it. But then as tinselkoala has maintained, it is about proving something to him. It's not.
The people on youtube that I sent the link to about the modification I believe would allow it to work perpetually are people that find it interesting.
As for one reason I do not need to build, my doctors and my employer both agree that i need to resolve my medical problems before returning to work. I work for Amazon.com and not tinselkoala, something he has missed.


btw tinself koala, this is all about you,right ? After all, you are the one who jumped into a thread I started and started harassing me with your first post. I mean the words "you blew it" refering to me were posted for what reason ? It's all on you. Of course, someone else posted they think it's funny when you correct someone, but you didn't correct me.
I guess AB Hammer was right when he said this forum is all about who the most aggressive person is.

edited to add, and once again tinself koala, your attacks omit engineering. you only want me to prove something to you so you can tell everyone even jim has to do what I want. I don't live for your happiness nor your approval.
You remind me of a preacher that used to harass me at work, it turned out he didn't read the Bible unless it was to tell someone what they had to do, he didn't know any other scripture. I guess one thing you don't know about me is I had to change careers from machining to warehousing because of problems my hearing loss cause. Also went to school for machining.
So why don't you bother someone else or show something yourself that is a mechanical build using levers. You can't for the simple reason is that you are a lost little boy when it comes to mechanical engineering.
And if anyone takes the time to look in other parts of the forum, I rarely if ever post there because I like to stick with what I know.

edited to add; yep, -people are checking out my design