Kapanadze Cousin - DALLY FREE ENERGY

[GeoFusion]

No capacitor at all. Better a thyristor or triac with RC  circuit resonant at 50 Hz. Urfa posted a diagram.

Hi Conico,

Yes, this area is of much interest. This is what many did not try yet and has to be done.
The workings of an Current Amplifier " accelerator " at receiver.

   Here's one of Geo's further modified diagrams. He can explain what he has done since then, which has been a lot.   

Hi Nick,
Yes type 3 mod was very successful test back then but was limited by voltage at the output.
Where I could have lit alot of load was holding inbetween a 68 till it drops to 60 and below when
connecting 1Kw worthy on bulbs but are on low lumens lvl because of voltage. Was not enough for loop.
3T from yoke with the series caps area was not meant to be output but somehow it became,
I just had a thought that maybe I had it working in reverse.
Grenade became very warm when in operation. Without the ground there was nothing.
Input amperage did not decrease/increase while adding load.
only when reaching threshold ( when placing alot of load till things happen)  only then you can see decrease in
input DC Amps and lose the effect for the moment.

But I was close those days, yet I did not like the sensitivity of the antenna so something els should be done,
that is why I stopped on that one and figuring other ways out and learn why others have it differently connected.
To know the Whole core we need to conduct series of experiments as to back engineer and see where it is.

All,
One thing I want to point out on is  at the Roma Gritz device and Vasmus are almost or are the same operation.


          Cheers~

[AlienGrey]

This weird as if you do it to the biggest winding it reflects through the whole windings and you should see it reflected on the primary and the 4turn winding. Try checking your not seeing a reflection of the 4t phase shift winding, the scope shot is of
a 2kw device that's working.

I haven't got that far on the device I have here yet.

In was trying to get apecore to see if he had got that far but he is very elusive and never available

[NickZ]

   apecore is available at times, mostly after happy hour. (just kidding apecore).  He has made a great effort on this project up to now. But, still no cigar.   Great wall hanging deco art, at least. He doesn't get too involved in all the BS here, that sometimes distracts us all.
    Itsu also made several great replication(s), as well. But, with similar results as the rest of us.
    Geo, has possibly shown the highest output, so far. But, like he mentioned, there was not enough output for the feed back circuit to work properly. As the 24v Feed Back power supply goes out, if too big a load is placed on the grenade's output. We are some of the few guys who have gotten to the feed back circuit part, and that is where we are both hung up on, at this time.    That is also the toughest bridge to cross.   It's good to see part of the old builders team group, interested in getting their hands dirty, again. So, let's push forward...

[AlienGrey]

Sergh is this what you're looking for?

https://www.youtube.com/watch?v=ym-5u4UomRM

[Jeg]

https://www.youtube.com/watch?v=_r0p6y6vtmM

gravity did you say ! part of free zp e

AG. Thanks a lot for this brake. Especially at 7:20 it is my first time i watch live a time distortion event. I won't ever forget it.