Kapanadze Cousin - DALLY FREE ENERGY

[NickZ]

  I looked at both videos, the Russian version is 8.41 minutes long, and the translated version is 14.20 minutes long. In neither videos at the 8.09 minute point do I see anything to indicate a false input source, or the red arrow tips that you mention.
I repeat, What are talking about?
 
   Think for one minute, why would a guy put up a video such as this, then in one day remove it, as well as ALL his videos on his web site.   IF it doesn't work??? Threats, or...

Most replications aren't showing anything that really works, either, like maybe 99.9 % of them.  People have had threats on their lives, for showing less than what has been shown by akula0083. At least that is what has been mentioned, which I also take as given.  I take everything at face value, until proven otherwise.  Stupid, or naive,  perhaps...

  Can't we just look for how it works, instead of how it doesn't. 
  Watch the bulbs dim, as the third one is placed in the socket, probably less than the 750 watts that Wesley is estimating to be the actual output. And how concerned he is at the component heat getting too high from HV,  Ui, yu,yui... But, No shock when touching anything such as the heat sinks. 
   My heat sinks will light a neon bulb. Proof of a HV feed-back going to the 12v Dc input source.
   Any ways, I hear the wild goose calling me. Gotta go.

[Hoppy]

  I looked at both videos, the Russian version is 8.41 minutes long, and the translated version is 14.20 minutes long. In neither videos at the 8.09 minute point do I see anything to indicate a false input source, or the red arrow tips that you mention.
I repeat, What are talking about?
 
   Think for one minute, why would a guy put up a video such as this, then in one day remove it, as well as ALL his videos on his web site.   IF it doesn't work??? Threats, or...

Most replications aren't showing anything that really works, either, like maybe 99.9 % of them.  People have had threats on their lives, for showing less than what has been shown by akula0083. At least that is what has been mentioned, which I also take as given.  I take everything at face value, until proven otherwise.  Stupid, or naive,  perhaps...

  Can't we just look for how it works, instead of how it doesn't. 
  Watch the bulbs dim, as the third one is placed in the socket, probably less than the 750 watts that Wesley is estimating to be the actual output. And how concerned he is at the component heat getting too high from HV,  Ui, yu,yui... But, No shock when touching anything such as the heat sinks. 
   My heat sinks will light a neon bulb. Proof of a HV feed-back going to the 12v Dc input source.
   Any ways, I hear the wild goose calling me. Gotta go.

Look at my post 1032 for the red arrows on the video clip showing the twin wire cable. The following link to the Tungus video narrated by Wesley also shows the twin wire cable at at 8:09: - http://www.youtube.com/watch?v=cUVvZzeDe5U&feature=youtu.be

[T-1000]

@NickZ
You caneliminate HV feedback if you make resonant LC circuit on primary. This is what Romanov's circuit is showing as well.

@itsu
You do not need yoke for step up transformer. If you would like to rebuild akula's version, the yoke there was used just to step up voltage from flip-flop circuit. The Romanov's latest simplified versions skip this part and do flip-flop directly on air core transformer. The main trick was mentioned multiple times - you make standing wave on air core transformer with one coil of thin wire(TT secondary) as voltage source and another coil (asymetrical D. Smith style) whith 2mm+ diameter wire as current source with 1/4 wavelenth resonant frequency of thin wire coil and connected via capacitor between them with resonance in series for lots of amps... The sweet spot where mixing of these two occur has good voltage and good amperage for your load.

[NickZ]

  Ok, now I see what you are talking about. Thanks, and sorry I missed it before.
But, this "twin cable" is not going anywhere that I can see, like on the cement slab.
So, HOW, is it going to power this device? And again, if that were the case, would he be allowing it to be seen? Just by accident on his part?
There is alot of work being done there, (just to fool people?). And for what purpose, fun and games?   NO, I don't think so.
  So, for now, I will remain skeptical of that "cable" as well, but continue to explore, and take this all in with grain of sand. Or wait for him to lift the device off of the chair, and walk around with it.

    I must admit that I also had missed Itsu's post, which I just now saw.
So... Greatings to Itsu from Nick in Costa Rica. And thank you for your truthful reply.
Well, I understand how you must feel Itsu, and do empathize with your sentiments.
However, I must push forward with this, as sitting on my hands will not resolve it for me.   
  I have been studying the Russian tests and videos , and trying to understand their logic, and their words, as best as I can. They are really much more open, and advanced to all this, than we are. And thus, are getting somewhere, or maybe just running around in circles,  but it doesn't look like it.


  So, back to the lab for me.  Have to find my goose whistle,  first..
                                                                                                         Later!

[Hoppy]

  Ok, now I see what you are talking about. Thanks, and sorry I missed it before.
But, this "twin cable" is not going anywhere that I can see, like on the cement slab.
So, HOW, is it going to power this device? And again, if that were the case, would he be allowing it to be seen? Just by accident on his part?
There is alot of work being done there, (just to fool people?). And for what purpose, fun and games?   NO, I don't think so.
  So, for now, I will remain skeptical of that "cable" as well, but continue to explore, and take this all in with grain of sand. Or wait for him to lift the device off of the chair, and walk around with it.

    I must admit that I also had missed Itsu's post, which I just now saw.
So... Greatings to Itsu from Nick in Costa Rica. And thank you for your truthful reply.
Well, I understand how you must feel Itsu, and do empathize with your sentiments.
However, I must push forward with this, as sitting on my hands will not resolve it for me.   
  I have been studying the Russian tests and videos , and trying to understand their logic, and their words, as best as I can. They are really much more open, and advanced to all this, than we are. And thus, are getting somewhere, or maybe just running around in circles,  but it doesn't look like it.


  So, back to the lab for me.  Have to find my goose whistle,  first..
                                                                                                         Later!

There is something resembling a cable coming out of the crack in the cement slab behind the chair that I mentioned some time back on the other thread but the video quality is too poor to resolve it well at the distance it is seen on camera. It is therefore not possible for me to be sure that the cable on the chair seat does not link to a cable on the floor. I would have made quite sure that no cables could be seen off the demo board to remove any sign of faking, so it is strange that we see this cable on the chair below the demo board. Someone with appropriate software may be able to resolve this into a clearer picture.