Kapanadze Cousin - DALLY FREE ENERGY

[verpies]

The difference is that Akula is not making an induction heater that requires 1000 watts of input for it to produce a higher wattage output. It does it with NO input source connected.

I think he is trying to show you some kind of an anomaly or a principle - not a whole replication of Acula's device at once.

[T-1000]

Gali išversti tai į lietuvių, nes angliškai sunkoka suprasti.

https://sites.google.com/site/searlmachine/antigravitacia/sarovye-molnii - "... стало очевидно, что шары образуются в результате взаимодействия двух частот, на гармонике более высокой
частоты волны, образуемой сложением с более низкой частотой колебаний главной цепи ....

Это условие действует как триггер, который приводит к полной мощности энергии волны образующейся в
бесконечно малом промежутке времени и пропорционально чрезвычайно большой скорости нарастания энергии,
которая не может ограничиваться металлом проводника и освобождается в окружающее пространство с немыслимой силой.

Это всего лишь шаг к пониманию, как высокая частота тока может формировать взрывной разряд.
Используя этот принцип, можно разработать систему, в которой эти взрывы могут производится  искусственно "
.-N. Tesla
(Same Tesla quote in Russian)

  T-1000:
   I have already viewed ALL his videos, several times. Yet without a diagram, and without understanding a word he says, it it obvious that I don't know what he it trying to do. The question is do you?  Not just his words, but how to replicate the results? Are you also guessing? 

I think he is trying to show you some kind of an anomaly or a principle - not a whole replication of Acula's device at once.

In Dally, Romanov, akula and Chibinidze(he's camera man just you guys nicknamed) circuits express same anomaly to me. This is why the test cases need to be done first so you guys can find exactly where "magic" happens. Also with 2 frequencies (same as in N. Tesla quote) I had personal experience with Aidas what came to lightning bulbs, burning dialectric in Tesla coil and burning skin with current from Tesla coil isntead of having usual exciter spark. I would love to share complete device but I do not have one at the moment...

[Hoppy]

I think he is trying to show you some kind of an anomaly or a principle - not a whole replication of Acula's device at once.

My understanding from watching the video is that he had around 2.5A at 25V powering an oscillator, driving a primary winding on a yoke ferrite transformer, with the pancake coil driven from from a low turns step-down secondary. The spanner was possibly connected to ground via the long wire? The clamp meter was reading 13.1A but was this accurate given that the oscillator output would have been HF and that clamp meters are designed to be accurate for 50Hz / 60Hz AC sinusoidal waveforms. However, I think the message is that with the pancake coil in series resonance (with the big tin-can capacitor), a high current is induced into the spanner by induction and that this current can in-turn be stepped up and further processed in some way to achieve the self-running goal. This demonstration therefore represents how we should approach the design of the device front-end?

[Grumage]

  Grum:
   The difference is that akula is not making an induction heater that requires 1000 watts of input for it to produce a higher wattage output. It does it with NO input source connected.

Dear Nick.

But isn't that a matter of perception? 1Kw in 1.5Kw out is the same as Zero in 500W out!! IMO there must have to be some energy expended to drive the device.

Cheers Grum.

[Grumage]

My understanding from watching the video is that he had around 2.5A at 25V powering an oscillator, driving a primary winding on a yoke ferrite transformer, with the pancake coil driven from from a low turns step-down secondary. The spanner was possibly connected to ground via the long wire? The clamp meter was reading 13.1A but was this accurate given that the oscillator output would have been HF and that clamp meters are designed to be accurate for 50Hz / 60Hz AC sinusoidal waveforms. However, I think the message is that with the pancake coil in series resonance (with the big tin-can capacitor), a high current is induced into the spanner by induction and that this current can in-turn be stepped up and further processed in some way to achieve the self-running goal. This demonstration therefore represents how we should approach the design of the device front-end?

Afternoon Hoppy.

Good point, but I think the long wire you mention is a temperature probe. My own thought is that he is demonstrating how good the step down transformer is.

Cheers Grum.