Kapanadze Cousin - DALLY FREE ENERGY

[d3x0r]

   Well it sounds like we are getting a bit distracted here.
   First we were talking about Dally, then Akula, then something else, and then something else again.
   If the schematics are wrong, the coil turns don't match what we see in the diagrams,  or what is seen in the videos,  and the different circuits have different configurations, etz... what we have is a mess to work with.
    Akula does not use a coaxial cable in his device, and still obtains a higher output than anyone else, except for TK, possibly.
  Anyways, which way do you want to go???  In all directions?
  Maybe Hoppy is right, and there may not be a fair wind blowing, yet.

As far as I can tell, dally is the base, and yes this has been hijacked a bit... and maybe is confusing to follow; maybe should have another thread for the akula which is just a kacher instead of coax-nanopulser... but the coil shown in the schematic does resemble the TK aquarium coil... And from the videos I can say I think that it is indeed the same sort of coil (exact turns and diameter may vary).  And while dally (and ruslan?) doesn't use the counter wound TK coil.... But your last comments were related to the akula schematic/pictures...


Ruslan is(was) based on dally, which is nanopulser...


But I do think they all go back to birkland currents... so a better test for this wouldn't be a microwave, but a vacuum chamber;
but maybe this should fracture into 2 more  separate targets so it can be easier followed.


I think you're embelishing the divergence a bit   Really the last bit of this thread has been the akula device  (from here.... http://www.overunity.com/12736/kapanadze-cousin-dally-free-energy/msg407232/#msg407232  ) and I think someone attributed this scheme to ruslan... I haven' gone back to his videos to see his coil  (and then I did)


Ruslan Kulabuhov[/color][/b][/font]
https://www.youtube.com/watch?v=hY-OC9yFcCU  guess it looks similar... I guess that's akula?
https://www.youtube.com/watch?v=59o_M6U9Un4


earlier video https://www.youtube.com/watch?v=pWfVnJ1sEms  (dally, KT926 transistor)


this is "TOPRuslan"
https://www.youtube.com/channel/UCYFyIlqNEMuUyw1CEhAKJwA  ( hate to say it, but all *these* russians look the same to me ... (lavians) ) 


....

[NickZ]

   This brings me back to.... which direction do you want to take, now.

   I came here to this thread a couple of years ago or so, because I was not able to replicate the original TK device as discussed in the TK thread. Mainly because no one could point out just how it really works, or provide us with a proper schematic, or working principals. And also because some of the guys that were there then were into discussing the non solid state TK device, at that time, which did not interest me at all. It was then suggested that I start a new thread. But, as this Daly thread was available and not being use then, I restarted it, to talk more about my interests in the non moving solid state free energy devices, such as the Akula device. The Daly replications had come to a dead end, with no positive results to be had by the few who tried to have a go at it. They know who they are, although I was not one of them, as the talk was that it must be fake, as no one could replicate it with positive results.
  There has since been much discussion about the Akula devices, on this thread, as well as  some other similar induction heater type circuits, which the first Akula device was originally derived from. As it is not just a "kacher" circuit, at all. Although it now incorporates the HV  duty cycle controlled Exciter or Kacher type circuit, along with the magnetic induction circuit, working together and heterodyning into a new frequency. Which appears to be the actual cause by which these self running devices may all be functioning by. Or not?

  Now this Daly thread has taken a new twist, with some hope for those interested in it's possible replication, due to Ruslan's self running device(s).

  Anyways, I just thought that it would be a good idea to try to focus on one thing at a time, and possibly try to obtain some working results. As we seam to be combining ideas, coils, and configurations from different circuits, that may not work as they were originally designed to.
Wishful thinking, perhaps...

   

 

[d3x0r]

  Anyways, I just thought that it would be a good idea to try to focus on one thing at a time, and possibly try to obtain some working results. As we seam to be combining ideas, coils, and configurations from different circuits, that may not work as they were originally designed to.
Wishful thinking, perhaps...

since you have your idea of how it works, and are apparently not willing to consider alternatives... I dunno what to say.
after analysis of the current state of things, there's really just the one akula topic. 


*raises hand* early contributer to dally replication, although I failed when it came to the nanopulse generator and gave up; although Itsu had success in that area, he didn't have success bringing it all together....

As it is not just a "kacher" circuit, at all.

Except the last example that was verified by tiger IS; and that's the last schematic and images...

due to Ruslan's self running device(s).

which include both dally flavor and akula Качер flavor.

Since the schematic is clearly labeled with "Качер" I don't see how you can say it's not.

[NickZ]

  I'm not sure I understand what "alternatives" you are talking about, which I should consider. As I have not seen any devices made by you or suggested by you, nor have I heard of any other alternatives, either. Other than your mentioning that the Akula device is "just a kacher".
If that is what you think, fine. But, Here (below) is where the original idea of the Brovin Kacher comes from, which was a high voltage but low amp circuit, unlike Akulas much more complicated high amp output type of circuit.
   https://www.youtube.com/watch?v=xMiNnHzFsRQ

  If you are not in agreement with what I'm suggesting in my previous post, that's ok, as I'm not here to argue. or prove a point to anyone.
  If you are suggesting that the original akula device, was not developed from his previous tests and experiments base on the induction heater type circuit, I suggest that you might want to check Akula's videos previous to his first self running device. If they are still available. There he mentions and shows how he developed his self running device from the induction heater based circuit (high amp circuit), and recommends us to do the same in order to understand how it works. I'm not making this up, as you seam to think.
Other than that, I'm not sure I understand your point, especially in reference to my inflexibility.


 
                                          NickZ
 

[00]

Here show, how coiil maybe must be wounded. Wound direction is acording schematic.

its wrong

the first layer is  cw then 2nd layer ccw then again cw and again cw. this is the pattern (corrected)

another variant ccw then cw then ccw and then ccw(corrected)

this pattern is kapanadze pattern

this combination works as magnetic cancellation coil.

the input ingredients are pulsed dc (either by katcher or pulser that must be fed to coaxial cable)
and another hf ac that must be fed to inductive input coil. as we know that Rf contains magnetic and electric vectors so to tap them we have to use variant of caduceus coil in linear fashion.

ruslan uses same tech as sr193 alias fabrice andre. being one modulator coil, output coil and long non inductive coil. fabrice  used ferrite so he had higher output. and to maintain frequency adjustment of the mixer he used copper tube in ferrite. and adjusting copper tube in ferrite changes resonant frequency of ferrite.

high frequency and pulsed dc as used by chubinidze  in cobo in one coil that thick copper one. the two transistors produced hf and then this hf is fed to  eht  of tv being rectified to pulsed dc.

so two coils are are being used one is input and other is output. he used ferrite rings. and adjustment of frequency is done by alluminium tube.

00