Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE

Started by bajac, October 07, 2012, 06:21:28 PM

Previous topic - Next topic

0 Members and 4 Guests are viewing this topic.

tagor

Quote from: bajac on November 05, 2012, 11:54:03 PM

I am looking for a dual phase smooth change stepper motor drivers. These drivers can generate two sinusoidal voltages with 90 degrees out of phase. IT IS PERFECT!!!

Thanks a lot!

yes i am using afmotor libraries

https://github.com/adafruit/Adafruit-Motor-Shield-library


and this

http://207.58.139.247/products/81


gadgetmall

Visit www.sunpowerwindpower.com For Gadgetmall fugi Completed unit,low powered Joule thief Kit's AA Fugi Kits,   rainbow R G B Joule theif kits completed housed units. NEW E-LIGHT AAA PERPETUAL LIGHT Runs for ?EARTH BATTERIES NOW ON SALE !  MAGNESIUM AND CARBON RODS ALL SIZES CARBON RODS 1/2" to 6" in Diameter 1 to 4 feet long & 650FARAD2.7VOLT ULTRABOOSTERCAPS THE MONSTER ,Instructions. Vintage Germanium Transistors run on low volts(0.20Vdc-some lower!)  Solar Cells 5VDC80ma,   BLUE BURNING LASER KITGreen laser pointer SEE Gadgetmall Kits link !

conradelektro

I think I found a very good IC for driving two coils with any current trace imaginable: DRV8834 from TI

http://uk.farnell.com/texas-instruments/drv8834pwp/driver-motor-dual-h-bridge-24htssop/dp/2115234?in_merch=New%20Products

One needs a microprocessor with at least two Digital/Analogue converters (Pins) and 6 I/O Pins.

An other drawback is the package (very small, pins close together, a pain to solder by hand)

See page 20 Fig. 12 in the data sheet (High-Resolution Microstepping Using a Microcontroller to Modulate VREF Signals)

The price is very low, less than 5 Euro.

Drive capability: 11.8 Volt, 1.5 Ampere (logic and D/A 3.6 Volt), very good for the TI LaunchPad MSP430

Of course, the program will be a bit evolved (D/A in combination with 6 pins in coordination), nothing for the faint hearted microprocessor programmer.

If some one knows how to solder such a small IC by hand, any suggestions are appreciated.

Greetings, Conrad

rensseak

Quote from: conradelektro on November 06, 2012, 03:25:46 PM
I think I found a very good IC for driving two coils with any current trace imaginable: DRV8834 from TI

http://uk.farnell.com/texas-instruments/drv8834pwp/driver-motor-dual-h-bridge-24htssop/dp/2115234?in_merch=New%20Products

One needs a microprocessor with at least two Digital/Analogue converters (Pins) and 6 I/O Pins.

An other drawback is the package (very small, pins close together, a pain to solder by hand)

See page 20 Fig. 12 in the data sheet (High-Resolution Microstepping Using a Microcontroller to Modulate VREF Signals)

The price is very low, less than 5 Euro.

Drive capability: 11.8 Volt, 1.5 Ampere (logic and D/A 3.6 Volt), very good for the TI LaunchPad MSP430

Of course, the program will be a bit evolved (D/A in combination with 6 pins in coordination), nothing for the faint hearted microprocessor programmer.

If some one knows how to solder such a small IC by hand, any suggestions are appreciated.

Greetings, Conrad

Wie wäre es mit Ultraschalllöten? http://www.sonicsolder.com/
Wenn Du das mit der Hand löten willst, viel Spaß dabei. Primär gehts wohl darum, dass der Chip nicht durch Hitzeeinwirkung vom Löten beschädigt wird.
Ansonsten würde ich erstmal alle Füßchen von unten mit einer möglichst dünnen Schicht Lötzinn versehen. Anschließend auf die Platine legen ausrichten fixieren und nur noch mal von oben ohne Lötzinn festlöten. Bei allen Lötprozessen für ausreichend Kühlung des Chips sorgen. Hope you are german.