Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Building a self looping "SMOT"

Started by elecar, October 08, 2013, 03:34:35 PM

Previous topic - Next topic

0 Members and 13 Guests are viewing this topic.

Newton II

Quote from: elecar on October 08, 2013, 05:38:32 PM

Hi Gyula,
            Yes I really do have a working prototype. It runs for as long as I am able to stand the noise. I tried running more than 1 ball but sometimes they catch up to each other and cause a complete stop.


Quote from: elecar on October 08, 2013, 05:38:32 PM

Hi Bill,
          I have to be honest I have never timed the runs, I can tell you that I did leave one test running whilst we went shopping and returned over 3 hours later and it was still running.


Quote from: elecar on October 08, 2013, 05:38:32 PM

If you just want to see my model running you should visit the thread in the future when I will post a video, I promised on another thread I would do that and I will post that video in the near future.


If not a 3 hr video,  can you  atleast show the ball making 15 to 20 cycles without your hand touching it ?



TinselKoala

(sound of crickets chirping)

Of course he cannot, NewtonII. He can't even show it going around TWICE, much less 10 or 15 times, even when he loads the "spring" by pulling the ball to the left against the pull of the magnets, and then actually pushes it into the track system with a quick finger flick as he does in the video.

Just in case he decides to remove the video evidence of his fail, here it is again:

elecar

Quote from: TinselKoala on November 06, 2013, 10:49:01 AM
Just as I predicted: the insults and special pleadings fly perpetually, but NO EVIDENCE supporting elecar's claims has been or will ever be presented.

Elecar's little video actually demolishes his case. Look at it carefully. You can see clearly that he places the ball ABOVE the entrance to the ramp arrangement, and that he flicks the ball to the right into the system with his fingers as he releases the ball. The ball enters the ramp with excess velocity, goes around one full turn, then stutters to a stop at the sticky point and NEVER regains the height of its initial release. There is no self-looping shown and the energy for what IS shown is clearly coming from elecar's hand.

And further, elecar is claiming that I have "minions". His paranoia is showing, in the most comical way possible. I don't have "minions", elecar, but what I do have, on this forum, is a lot of ENEMIES, people who can't stand to see me comment.... but who have never even once been able to refute anything I've said. This pisses them off and makes them insult me and anyone who appears to agree with me.... and frustrates them so much that they start stomping their feet and holding their breath. But what they cannot do is to provide evidence for their claims.

He labels his screen shots "elecarfake" and gets hurt that I call him a moron and many other things beside.

There are no "FLICKS" of the ball in the video, it was purely taken at the request of a member.

You are wrong TK people do not hate you for posting, it is the manner in which you post. You are entitled to your opinion but when you become disrespectful which is your standard MO you get people backs up.


THIS OFFER IS ONLY AVAILABLE TO TK, COME TO ENGLAND AND WATCH THE BALL SELF LOOP WITH YOUR OWN 2 EYES. YOU WILL BE FREE TO DISASSEMBLE THE SMOT TO ENSURE THERE ARE NO TRICKS, CONS OR SCAMS. IN FACT YOU CAN KEEP IT IN YOUR HOTEL ROOM YOUR WHOLE STAY.

IF THERE IS ANY TRICKERY OR DECEPTION I WILL REIMBURSE TKs AIR FARE AND HE CAN COME ON TO THE FORUM AND EXPOSE ME AS A CHEAT, LIAR, CON, SCAMMER. AND YOU RESUME YOUR PLACE AS KING OF THE FORUM KNOW IT ALLS.

HOWEVER IF AFTER HE HAS WATCHED THE SMOT LOOP FOR 3 HOURS AND BEEN ALLOWED TO TAKE IT APART TO LOOK FOR CHEATS HE COMES TO THE CONCLUSION IT WORKS AS I HAVE STATED.

THEN HE MUST COME ON THE FORUM JUST 1 FINAL TIME TO LET HIS FANS KNOW I WAS TELLING THE TRUTH AND HE MUST APOLOGIZE TO ME AND HE MUST ADMIT HE IS A BULLY AND A KNOW IT ALL.

HE MUST THEN NEVER COME ON THIS OR ANY OTHER FORUM THAT HAS ANYTHING TO DO WITH OVER UNITY OR FREE ENERGY.

What do you say TK ? You coming ? 

elecar

Quote from: TinselKoala on November 06, 2013, 11:41:24 AM
(sound of crickets chirping)

Of course he cannot, NewtonII. He can't even show it going around TWICE, much less 10 or 15 times, even when he loads the "spring" by pulling the ball to the left against the pull of the magnets, and then actually pushes it into the track system with a quick finger flick as he does in the video.

Just in case he decides to remove the video evidence of his fail, here it is again:


TK you expect not to be treated as a MORON but as I have previously stated when you did your last "PRESERVATION" post.

You can not remove the post or alter it, I also said that perhaps the admin on here bows to you and you may have special dispensation to edit and delete your posts but I dont.
Thats why I added the videos as attachments so they are "PRESERVED" 

Are you really that retarded ? Or are you just trying to look good to your minions ?

TinselKoala

Once again, you offer no refutation, no evidence, nothing that shows that my analysis of the video is wrong in any way. All you do is shout and insult.

Of course I am not coming to England and you know it. But you are welcome to come to Texas and I will take you to a laboratory that I know about and let you convince the scientists THERE that you have what you claim, or if you don't want to come to this barbarous backwater, I know another laboratory in Toronto that would be more than happy to allow you to demonstrate to your heart's content. I will not be involved other than to make the introductions.

Much simpler would be for you to just show HERE what you claim, and what you FAILED to show in the video.

Do you deny that you pulled the ball to the LEFT?
Do you deny that you flicked the ball into the track system using your fingers?
Do you deny that the ball never again reached the height of the "release"?
Do you deny that the ball only made a single loop after your release?
Do you deny that the ball came to rest in the "sticky spot" or magnetic potential well at the end of the clip?

Of course you cannot deny any of that, because your own video clearly shows all of the above things are true, as my frame captures clearly illustrate.

Again, you cannot refute any of my points, so you insult me, erect straw-man and paranoid arguments, and shout in entire paragraphs of footstomping whining. Wouldn't it be a lot easier just to SHOW YOUR EVIDENCE?

Of course it would be, but you don't have any to show.

And I don't have any "special dispensation" for anything in this forum. Stefan tolerates me for some reason, perhaps because I put my demonstrations and analyses up for anyone to criticise and duplicate or refute as they like, in stark contrast to people like YOU who insult without reason, make claims without evidence, and take people on wild goose chases like you are doing now.

Present your evidence for your claims and refute me. You cannot.