Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Quantum Energy Generator (QEG) Open Sourced (by HopeGirl)

Started by madddann, March 26, 2014, 09:42:27 PM

Previous topic - Next topic

0 Members and 52 Guests are viewing this topic.

Print
Go Down Pages 1 ... 132 133 134 135 136 ... 804
User actions

Bruce_TPU

#665
May 03, 2014, 10:30:09 AM
Not to worry guys!  I've got a part of the TPU working and have experimentally tested out other parts.  Still a ways to go, but winding every day.

The math was completed some time ago, but the circuit potential has been a booger!  But we have made fantastic progress on that part of it.

The secret is definitely in the coils interactions with one another and learning to move electrons.  And of course, you have to have a "real" power source.  The earth's magnetic waves.   ;)


Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

tysb3

#666
May 03, 2014, 11:12:16 AM
Quote from: Bruce_TPU on May 03, 2014, 10:30:09 AM
Not to worry guys!  I've got a part of the TPU working and have experimentally tested out other parts.  Still a ways to go, but winding every day.

The math was completed some time ago, but the circuit potential has been a booger!  But we have made fantastic progress on that part of it.

The secret is definitely in the coils interactions with one another and learning to move electrons.  And of course, you have to have a "real" power source.  The earth's magnetic waves.   ;)


Cheers,

Bruce

I think the secret is ferromagnetic core resonance. there is the "zero point" energy pump. it's need to be 2 resonances in one time, - resonance in resonance, like told Kapanadze to Melnichenko long time ago. the QEG guys get only LC resonance. they need to check QEG cores ferromagnetic resonance and tune LC resonance on 1/2 or 1/4 or 1/8 cores harmonic of ferromagnetic resonance.

http://realstrannik.ru/media/kunena/attachments/6159/opredelenie_MR.pdf

Hoppy

#667
May 03, 2014, 02:07:00 PM
Quote from: hartiberlin on May 03, 2014, 10:22:30 AM
Sorry, to burst all your hopes,
but I just heard yeasterday regarding the QEG measurements in Morroco , that Gerhard Roessler, a German electrical engineer has just measured :

500 Watts input power from the drive motor and only 120 Watts maximal output power at the lamps...

so no overunity and no selfrunning...

it seems the claimed "raw power" of Mr. Robitaille was either measurement errors or a
lie to make lots of money with donations...too bad...

Regards, Stefan.

I'm sure I'm not the only one who is not surprised at this news.

MileHigh

#668
May 03, 2014, 02:30:34 PM
Quote from: Hoppy on May 03, 2014, 02:07:00 PM
I'm sure I'm not the only one who is not surprised at this news.

I am not surprised.  What might be a surprise is how much money will have been spent on this and where most of that money ends up.

Allegedly there are around 200 replicator teams out there that intend on doing a full-blown replication by purchasing the 'official' core which apparently costs about $3000 USD.  Some of them must be reading this thread.

For those replicators that are reading this thread, can you please post directly or indirectly what you current costs are?  If you can, please split that into the total parts cost in US dollars and labour costs.  For the labour costs, let's say that you estimate the number of man-hours and you 'charge yourself' $25 US dollars per hour.

Any replicators willing to share this basic data with us?  It would be very interesting and it will show others how much of a financial and time drain this has become.

Even if you did all of this willingly, I am sure that many of us would like to know how much this adventure has cost.

MileHigh

Pirate88179

#669
May 03, 2014, 04:52:01 PM
Quote from: Hoppy on May 03, 2014, 02:07:00 PM
I'm sure I'm not the only one who is not surprised at this news.

Surprised?  I am shocked...shocked I tell you.  Measurement error?  How can this be?

Seriously though, the real measurements do not seem to be even close so, that was one hell of an error over there.  I really wish folks would have others check their measurements before claiming O.U. and causing some good believing people to spend hard earned money on fruitless replications.

Now just wait, someone will claim that the MIB shut them down.

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen
Print
Go Up Pages 1 ... 132 133 134 135 136 ... 804
User actions