Lenz free generator

[i_ron]

snip

Yes.

could the RPM and the number of magnets be considered one frequency?


Ron

[lancaIV]

At the Sund there is a sound like the Syrene singasong,similar the Martin horn,it is in the sonic sphere.
Going up and down and also down and up :the under -and overtones,remark this from the middleline
it is called thermal voltage also thermal noise and is to be seen as thermal oscillations,frequency serching to become the resonance phase like a PC software virus.


We manipulate and becomes manipulated by ever the e-m-k-f-spectrum,hell and dark matter space
                               it is a Tele-(wifi)actuating multidimensional energy field
                                               "Dream design to reality field"
                                                    w-y-d(ream)-i-w-y-g

                                              air core or virtual "winding" core
( look -this related- for the T.A.S.E.R. shot concept http://www.imfdb.org/wiki/Bloodsport
"  Tasertron " ).

[hoptoad]

@Erfinder

Regarding your video : https://www.youtube.com/watch?v=NWtcpdQ5h24&feature=youtu.be
Nice demo. Using the transformers in the setup, as shown, looks familiar. 
Cheers

[lancaIV]

I had one of those "whatever" moments so I used some ribbon cable to wind a coil.

I split a length of cable into a 2 wire strip and a 3 wire strip and wound them on a former like a capacitor.

I started with the 2 wire ribbon and then placed the 3 wire so that the middle wire of the 3 wire was in the middle of the 2 wire.  I also ran the 2 wire around one extra turn so that it was both on the bottom and the top.

9.5 inch former
12 wraps of 3
13 wraps of 2

When pulsing 20+ volts into the middle wire of the 3 wire cable the best I got out from all the others was about like 1.7V  I have not tried all combinations yet just a quick lets look and see.

This is air core.

Next I looked at the current when I had all the other wires in parallel and still stuffing the pulse in through the middle wire of the 3 wire ribbon,, 0.330A 18.8V,, not really caring about the voltage,, output was .089A straight into my meter.

Then I grabbed a ferrite E core from a transformer and placed a small part of the coil between the legs,, output went up to 0.094A,, grabbed a stack of metal E cores about the same thickness,, output went up to 0.102A,, grabbed a computer side cover and covered the one side of the entire core and then some,, output went down to 0.065A,, still want to try more things

Here is the coil and the side cover and E cores.

                                                                                  E I is not Egg-O-maniac 
                                                         https://www.youtube.com/watch?v=55GcSUT3RTI 

[i_ron]

Mag amp experiments


Ron