Partnered Output Coils - Free Energy

[MarkE]

PW,

Like I have said all along, my work is simply replications of other devices that I have already shown, my work is nothing new, my work started with a simple re-discovery, I then found that this was nothing new, its all been done before! Many of the greatest devices in history have shown these same configurations. Many devices that have run themselves, powered useful loads, done useful work... Bill Alek's work is nothing new, he even says this!

Because youre ignorant to the facts, quite a few people right now have Free Energy Devices, the amazing thing is, they know how to build them, they can replicate them and make them work every time!

I am not asking you to take my word for this, or anyone to. But I can say, with a little dedication, some thought, and perseverance this is readily achievable with the Data I have already given you! You sit, complaining, while others are working, experimenting, seeing things work, measuring excellent efficiencies! But, you, PW, sit and complain!

I posted this at the start on this thread: https://www.youtube.com/watch?v=ZhQgch4L5XY

I posted on YouTube, around 7 months ago, but the Video was around 2 years old at the time. Yet you disputed this, I show what I have presented: Partnered Output Coils, doing usefull work, Shorted with no effect on the Input, I explain how to do it and explain that it was low level OU... But you, are too old, to tired, and too lazy to get off your Ass and do the investigations!

Is it that you need someone to hold your Hand? Is it that you are mentally unable to try? Incapable because of a Roll of Electrical Tape has disabled your ability's to extend your Arms?

Look, honestly, if you don't like t, don't believe it, don't want to see possibilities, leave, don't come back! But here in lies the situation, you do keep coming back, you cant put this down, because subconsciously you do know what I have said it the truth, its the path forward, you just don't want to admit it!

There is only one person that can help you Picowatt, that person is YOU!

   Chris Sykes
       hyiq.org

You ccan make claims all day long.  They are known to be false.  Your claims of working free energy machines are a particular joke.

[tinman]

Chris:  The problem is that there is not a single iota of substance to back up your grandiose statements.  Plus Mark is acknowledged as an expert and you are acknowledged as a rank amateur that spent 15 years on your bench but you still managed to show everybody that you barely have a clue about how a coil works.

Tinman:  If you have data to back up your claim then please present it.

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what?
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

[MarkE]

It sounds fine to me.

[EMJunkie]

Quite a few people claim to have free energy devices, yet none have been confirmed by a qualified third party or made available commercially.
I do not complain (except with regard to your insulting tones).  I just don't believe you have any free energy devices.  And yes, as you are not offering any evidence to support your claims, you are indeed asking us all to just take your word for it.

I don't dispute it at all.  I am just not impressed.  What do we see?  A lamp running from 5V at 300mA.  Are we supposed to be impressed because when you short the secondary the input power does not change?  I find that totally uninteresting and unremarkable.  I definitely do not see that as evidence of "free energy".  Your other video (self assisted...) shows something similar, a dimly lit bulb with 14 watts or so of supply current and again, you short the secondary with minimal input power change as if that is something truly amazing.  If that is your definition of "success" (the coil shorting thing) then I am less than impressed.


And again, notice how you just can't resist making assumptions about people and getting your insulting digs in any time you can.  Try growing up and learning how to have a discussion without your constant need to insult or denigrate as if that somehow bolsters your position.  It does not.

The truth is indeed the path forward, make sure you are listening to your own advice.

So again, can you demonstrate a free energy device doing anything useful with the free energy it manifests?

PW

PW, honestly I read your post and see the same old things...

I have one point I want to make: When you say:

you are indeed asking us all to just take your word for it.

I have NOT asked you, or anyone for anything! Period. I have given you my findings! You, and for that matter, everyone is free to do what they want with those findings!

I certainly have not asked you to "Believe me"! This is A PW Assumption. Ever heard of Free Will?

I have now made my point! A conversation between Adults, requires two! It sounds like you're getting MarkE to proof read your posts before submitting them? What's going on here?

   Chris Sykes
       hyiq.org

[EMJunkie]

It sounds fine to me.

Says he who will dispute entirely the very gospel he preaches - What a total joke!!!

What is it: GIGO is the official term to dispute known and IEEE Accepted Power Equations!

   Chris Sykes
       hyiq.org