Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Partnered Output Coils - Free Energy

Started by EMJunkie, January 16, 2015, 12:08:38 AM

Previous topic - Next topic

0 Members and 214 Guests are viewing this topic.

hyiq

Quote from: gyulasun on February 18, 2017, 07:19:55 PM
Hi Chris,

I can see three problems.

1) your 4.92 uF and 0.24 H should resonate on 146.46 Hz and not on your FG's input of 270 Hz (if you set the FG to 270 Hz, that is)




Is this really a "Problem"? Or just a lack of observation? My scope does show: "141.8Hz" so, on one diagram, I perhaps should not have rushed and corrected the actual Frequency on that Circuit.


Quote from: gyulasun on February 18, 2017, 07:19:55 PM

2) your chosen current measuring point in the parallel resonance circuit is not correct: you actually check the coil current and not the input current going into the parallel LC circuit. In this circuit you should insert the current sensing resistor in series with the generator, say in its GND wire that goes to the bottom of the paralleled LC , and not in series with the coil





I think you have missed the entire Conversation? We are talking specifically about the Voltage Current Relationship inside a RLC or LC Circuit, and not the Power into the Circuit?


Quote from: gyulasun on February 18, 2017, 07:19:55 PM



3) your chosen voltage measuring point in the series LC circuit is not correct: you actually check the phase shift of the capacitor. In this circuit the test point for the voltage is the direct FG's 'hot' output itself.

Gyula




I am not sure you understand our current topic? Please read back on the past posts to see what we are actually showing. We specifically are not showing the Input Power, we have covered this already. We are showing the Phase relationships Inside the LC Circuit Only!

Sorry, I am repeating my self, to try in all honesty to make sure I am being Clear!


   Chris Sykes
       hyiq.org

gotoluc


Quote from: hyiq on February 18, 2017, 06:56:23 PM
I have never told any lies, ever!

http://overunity.com/15395/partnered-output-coils-free-energy/msg491630/#msg491630

Chris,

That link is not going to help!... probably the opposite. You wrote a lot of things that are not correct.



Quote from: hyiq on February 18, 2017, 06:56:23 PM
you that owes GotoLuc an apology, for pressing him for Information. In the process, through a complete circle of incomplete dialogs... Storeys got mixed up and falsified. Which You Chet K were part of!!!

   Chris Sykes
       hyiq.org

Again, you're making stuff up!... I posted above that I told Chet information to get him off your case. Where did I write he was "pressing for Information"?   I totally volunteered this information.

Why write such a thing?... that's as close to a lie as it gets when you make stuff up. Stick to what you know is true

Stop before things get worse.
We are trying to help believe it or not.

Sincerely

Luc

hyiq


Quote from: ramset on February 18, 2017, 07:31:27 PM
Chris
Quote
I have never told any lies ever
end quote

Lets get into this shall we ?

please start a thread for this as you have been intimating and outright calling many persons here thieves and liars controlled By
Mark Golds and even recently said Stefan Hartmann controls or Manages this nefarious figment of your imagination

or was the most recent example of Brad working under this make believe group not a Lie ??

you owe Brad an apology too


Chris
the truth will set you free

you have made countless false accusations against many members here

START A NEW THREAD






On your way to Hell, say Hi to George Bush Pal - Go Away, you Chet K are not welcome here!!!


   Chris Sykes
       hyiq.org


hyiq


Quote from: gotoluc on February 18, 2017, 07:34:19 PM

Chris,

That link is not going to help!... probably the opposite.

As well, you're making stuff up!... I posted above that I told Chet information to get him off your case. Where did I write he was "pressing for Information"?

Why write such a thing?... that's as close to a lie as it gets when you make stuff up. Stick to what you know as truth.[/size]

Stop before things get worse.
We are trying to help believe it or not.

Sincerely

Luc




Well Luc, help then, Replicate Wistiti's Work (125%), Yuri Likhovid's Work (114%), Tinman's Work (118%), Graham Gundersons Work (560%), show your work! Many many more with good results...

The Time is now Luc, focus your effort on the task at hand and share your results!

Lets see if you really are trying to help, like I hope you are!


   Chris Sykes
       hyiq.org


ramset

Chris
I have learned in my life to treat another man as I would want to be treated, to NEVER accuse or infer ill behavior or ill will on another.
I have also learned the truth is a media which requires the most steadfast adherence as a part of this Life style.

the only reason I am here [in this thread] or have been over these last few years is your continued insistence of claims ,and constant requirement for testing by fellows whom I work with/for ...

yes Chris I do work here and elsewhere in any possible manner I can to assist the experimenters here and elsewhere.
I spent a lifetime working for test Labs and interacting with the strictest possible test protocols in the most risky
and dangerous scenarios ,it is an area where I am quite comfortable.

your anger with me ...if truth be told

you have never shared one example of anomalous energy which was not attributed to error

Not One

and you hate me for saying the truth [example above post],and make up all manner of stories VERY TALL stories , you behave as a child not a man.

You try once again to get thrown out here

Not by My hand !!

Man up Chris the floor is yours

Chetkremens@gmail.com

ps
and just for clarity ,my email has been in my profile for the better part of a decade and I do NOT post it here for you
Oh contraire
you tried posting my full name here as if it would intimidate me the last time you were trying to get thrown out.[when you started posting accusations against Stefan]

man up Chris

POST YOUR WORK !!
lets see what comes of it as Luc says below ?





Whats for yah ne're go bye yah
Thanks Grandma