Confirmation of OU devices and claims

[rickfriedrich]

I'm going to need another week to finish this video. I'm going to make a big presentation on this.

I'm not going to enlarge about what I mean by balance. But you are moving in the right direction it seems. You will see the video and associated information next week that will demonstrate as far as I am going to show. If you watch the videos I have done already you can see this. I will be organizing all the videos (beyond my playlists on my rickfriedrich youtube channel) next week.

Rick,
are you saying that it's not just about hitting tanks with the negative spike and take some power of the resulting resonant current? I get that depending on tuning we can either send back power to the input or send more to the charge battery, or neither and have the system in balance. Are you saying that when it is in balance something else happens which results in the possibility of the load not having voltage across it?
Maybe the best way to learn what you mean (or what you think I'm missing) is you giving a concrete example, I have solid state SG, I have a resonant tank (unloaded yet) between diode and charge battery. Show me what I should do with it to experience what you mean.
Btw, you said that in your schematic the third coil is not complete and that the cap would explode. I thought that cap was connected to the coil to make it resonant. It's actually not clear to me if the third and fourth coil are supposed to be one setup the way it is shown, or are they two separate setups? The cap you mention is connected to the coil on its left side, does the caps right leg touch the coil(s)?
I was referring to the diode lamps you show in the main video on your channel, at what voltage are they normally run at?
I'm looking forward to the new video:)
thanks
Mario

[rickfriedrich]

Yes.

Hi all
I'd like to ask Rick about the series inductor impedances which serve as a stand alone reaction loops. Each connecting point between those inductances, is a reflection point especially when we are in resonance. This eventually will lead to a creation of standing waves on the line which consists of that reactive loops. Is that an effect that relates to the amounts of the extracted free energy? Is that a point that we have to pay more attention like building for example reactive loops with specific lengths of wire harmonically related?
Thanks
Jeg

[popolibero]

Hi Rick,


that's great, take your time. Something else: when we talked about how to use a negatively charged battery on the front end I said I use a big cap, you said it's the right direction but something else needed to be made, and that the schematics have been shown. Could you tell me where I can find them? I suppose it could be disconnecting the battery from the cap on the positive side with a mosfet run out of phase with the drive mosfet...


thanks,
Mario

[rickfriedrich]

And can any serious measurements be taken seriously over the internet? You will never be able to tell enough from pictures or videos if the measurements are real or fake, or mistaken, or what the complete environment really is when this is shared through the internet. Why do you guys still have this double standard??? You readily believe anything someone says or shows against a free energy claim while you disbelieve anything someone says for free energy claims. And those for free energy will readily believe videos and pictures and claims of free energy systems and disbelieve those who oppose. So most people are doing one of these or the other. But the truth is you cannot believe any meter readings shown here or anywhere online. Here is one point along these lines in the video I am doing presently: You can not even realize that you have damaged parts and then you do your measurements and come to wrong conclusions. So the skeptic is confirmed because he wants to disbelieve the claim. On the other hand, the believer in free energy may have a meter that isn't properly calibrated and gives him a false positive. How can we know the whole story if we are not there and fully check things out over time and properly control the details? You just can't do that.

Now I have no problem with people sharing pictures and videos as is being done. But conclusions people are making from other peoples claims is unjustified and actually reckless. It promotes a double standard as I said.

So my point is that someone posting pictures without meters, while making a claim that they are excited about, is just as valuable, and on the same level, as someone posting very limited pictures with meters while making claims. They are both unverifiable claims. So the both are of equal value when it comes to proving anything--which neither of them prove anything. All they can really do is suggest ideas for people to try. And as such they are valuable. But as we have seen yesterday, there are mistakes being made with meters. This only goes to show everyone that you will never know the actual environment of anyone else over the internet. You can never know what all they could be doing wrong or be mistaken by or if it is real at all.

quote a.king21 Posts: 1481:  Coils at all angles.             ha ha lol 
                                            OU coils at all angles2.jpg

It doesn't matter what you are doing guys the LEDs will be glowing anyhow.  Ha ha
Any serious measurements?
NO
Arne

[rickfriedrich]

Yes that subject of what is happening in the battery is too involved to get into on the forums (and it requires the use of words and models that I am undecided in at this time). As for the idea, you are converting the negative to positive through a capacitor. So you can see the way we do it with the cap pulser before the battery, and you can think that through and do something similar on the front end. This would be like using various RC or even LC filters like you find with bandpass bypass, etc. I don't usually do that and having posted any schematics myself so you are on your own.

The idea to understand, as has been recently brought up here, is the DSE or Don Smith Effect. The idea is that the capacitor is a blocking device. More importantly it allows for replicating the energy on the front side on the back side. So the OU demonstration Don gave, that most people completely missed, was that he had double the arcing from the input when you consider the regular arcing to the one side of the plate was about 1" and then when he added a ground terminal an inch away from the other side plate it arced another 1" and effectively doubled or duplicated the energy. Now the arc was a real load on both sides. This is an essential process with Don Smith systems.

The point here is that the capacitor replicates the energy on the output side, and this case the replication becomes positive energy and results in current flow under the circumstances. So once you understand this you can build the appropriate filter(s) so do the same on the front end. The same is true with doing this third stage process to power loads with positive energy.

Hi Rick,
that's great, take your time. Something else: when we talked about how to use a negatively charged battery on the front end I said I use a big cap, you said it's the right direction but something else needed to be made, and that the schematics have been shown. Could you tell me where I can find them? I suppose it could be disconnecting the battery from the cap on the positive side with a mosfet run out of phase with the drive mosfet...
thanks,
Mario