Kapanadze and other FE discussion

[SolarLab]

 
Buck boost Autotransformers

https://www.youtube.com/watch?v=QtByASWDFwE

The Current Transformer

Question: What results when you have an open secondary CT?

https://www.electronics-tutorials.ws/transformer/current-transformer.html

1000A High Current Transformer Experiment

https://www.youtube.com/watch?v=ID7gG6krecI 

FIN

[Jeg]

Hi itsu Nice to see again scopeshots of yours!

Well, i tested one bulb at a time. First 40W and then 70W. Both Incadesent bulbs at 220V.
Yellow is across the input capacitor C1. Blue is taken as you said between L1 and Czero.
Yes input is approximately 2X24V=48W. (with the 40W bulb)

I see at your last scopeshot that your input voltage (yellow) slightly inceases when feedback returns back some energy. Judjing by your very high input capacitance, looks like a generous return. Probably i have a flaw in my wiring connections as i don't see any change across my input capacitor C1=470uF.

[Jeg]

Itsu, V8Carlos
I think there is a flaw in the original Q-circuit. When Czero charges , L1 steals charges from the input capacitors, something that has to be blocked.
Itsu it will be easier if you could measure with your current probe, what flows between D1 and C2 and to what direction.

If this is true then the addition of D3 is of a necessity.

Also if everyone agree to move this conversation in the old kapanadje thread or in a new one for not disturbing the guys here.   
Regards

[v8karlo]

We are struggling years on bench with Ruslan's bullshits! What you just described it has already been tested with so many different ways i really can't remember. Yes the timing that you say is correct. But you always need power to create high voltage peaks. No matter how much power you need, at the end of the superimposition we are again at the starting point. Pout=Pin-losses.

About this 90 degrees thing is a nice subject for loosing few years more until to understand that the above equation doesn't ever change. But this is only my personal opinion of cource

Guys i open again the old rusty Kapanadje thread for the V8-tests.

It will be good to start new tread Q.


About Q device. It uses energy trough bulb in both 2 phase. But it is returning energy only in 1 phase. So it should be 50% returned. In reality, losses, lets say 45%. If you could manage it to return energy in both phases you have your monster. It is that simple.


I work during New Year Eve so i wont be able to be on forum.for a few days. I write this from my mobile. The idea is real and the principle is good. You decide.

[Sergh]

And now you will be able to know how Wesley was able to  excite dielectric.https://youtu.be/KLAPRNWuAn4?t=883

Oh, Wesley..
When this antenna worked, I could show you such "wonders" at a distance of 5 kilometers from it.
https://www.youtube.com/watch?v=e7eoZIGGDGk
https://realt.onliner.by/2018/04/27/radio
Happy New Year!