Tesla - Grebennikov Resonant Inductive Energy Convertor

[geovat]

Many asked me to show them how transformer coils L1 and L2 are built so I made a video and the address is below. The process is very simple. First I want to specify a few things:
- many structures resonate connected to a Tesla coil, and these coil-capacitor structures have the property of amplifying voltage and current and generating electric and RF fields. The connection can be by induction by air or by conductor. Each structure has a different property and resonance. The structures interact with the surrounding environment. Structures more or less change their properties depending on the environment if they are not encapsulated, the resonant frequencies change. The polarization effect can be added to the resonance. Power consumption in watts depends on how and where you connect the consumers - the load resistors, sometimes power consumption is zero in these resonant devices. The main resonant frequency is the pulse frequency of the transistor used in the Tesla coil and the LC circuit of the Tesla coil if it exists. If you change the driver of the Tesla coil, you can even make a stone to resonate. Combining with the polarizing effect leads to even more interesting results! The polarizing effect requires HV (high voltage). I recommend an interesting book:
New Sources of Energy: free energy technologies – December 21, 2021 by Aleksandr Frolov
Simple coil video, I use 6 coil like this for the presented device box, connected in parallel: https://youtu.be/JDwdgSRwf1M
Also some users asked me about antigravity research and I want to say one thing about it - those are military research and are still secret and they still protect their secrets and a lot of misinformation and fake video and text materials are injected into public media each year to confuse the audience interested in those subjects. I confirm that the fields forces used in those devices can go beyond this universe and the human that use those device and fields must be part of those fields and have god health and strength for this.

[magpwr]

hi geovat,
I spotted a issue within 12seconds the first time i lay my eyes on your video.
https://www.youtube.com/watch?v=egJxVfiT3WU&t=8s
I have attached screenshot between 10...11sec upon removing  the multi-meter probe the display on meter still indicates a Amp reading.
I have made the same mistake before and blame it on field effecting the whatever plastic multi-meter.

The Amps is incorrectly measured/invalid.I'm sorry.

[geovat]

hi geovat,
I spotted a issue within 12seconds the first time i lay my eyes on your video.
https://www.youtube.com/watch?v=egJxVfiT3WU&t=8s
I have attached screenshot between 10...11sec upon removing  the multi-meter probe the display on meter still indicates a Amp reading.
I have made the same mistake before and blame it on field effecting the whatever plastic multi-meter.

The Amps is incorrectly measured/invalid.I'm sorry.

1. The straws capacitor voltage it's almost the same like the voltage showed by the multimeter after removing the probe.
2. The device field is so powerful that even the air voltage and amps are very high, but this is a common to Tesla coils used with ground connection, make a test if you have one. (connect one probe to ground and one closer to the Tesla coil). If I close the box and ground it still remain a voltage in the air but more less.
3. When filmed I check the capacitor voltage and amps to be safe, if the voltage and amps are over 1Kv could become a little dangerous I think to touch the device and wires by hand. It's more an experiment and not a presentation in videos. I still not learned all connection modes of the device because I'm in a lot of experiments and research with various objects and devices, even nanotech.
At video second 29 you can observe the multimeter ground connection of the second probe: https://www.youtube.com/watch?v=egJxVfiT3WU&t=29s
I hope my answer cleared the sequence issue.

[sergeyman]

I present a device based on a Tesla Mini coil and cavity structures based on Grebennikov's studies.  The device is a prototype of converting the electric field into current, amplifier and a little generator - inverter.  It is not a "free energy" device.  It consists of a capacitor, a group of transformer coils and a Tesla mini coil.  The capacitor is made of drinking straw with two metal terminals, the coils are a bit more complex but their construction is shown in the other videos on my channel.  The device is based on the induction of the electric field and on the oscillation L - C. The oscillation takes place at the frequency of 5-8 MHz depending on the type of power supply.  Using other frequencies can be harmful to your health.  The generated electric field extends a few meters with high values in the air if the assembly is not enclosed in a metal box.  The device does not work properly without a ground connection.  Using coils voltage and capacitance terminals, multiple voltage and current values   can be obtained.  What you see in the pictures is a prototype, an experiment, not a final product.  When I have time, I will also do English subtitle for videos.  The device is capable of supplying both AC and DC power depending on the type of power supply. Other experiment's will follow in the future. I noticed that the AC power supply is much more suitable, the amplification being stronger and the ratio more efficient even at low voltage.  With extremely high electric field values, I will not use a stronger Tesla coil for safety reasons, as these tests are indicated to be performed in the laboratory. Also the 6Mhz current and voltage doesn't directly shock you even is over 1Kv with 10 amps but I don't recommend to stay longer in this current or field directly. Also be aware that by mistake you convert the current, to a lower frequency 80-30hz, that can be fatality. Don't try this kind of device near your tv if it's not shielded well to ground. The construction costs are low and I will build such devices for my neighbors, the power consumption is extremely low ~0.5W at 6V,~3W at 9V, ~6W at 12V.  LC cases are for design only and have no function, the box is an ice box for beer, the initial tests were performed using a cardboard box wrapped in aluminum foil - see the other videos on my channel.  In video i used a couple of conversion coils/transformers but in a older video there is a experiment using a single one like in schematic attached. There is no fixed mode to use this device feel free and use your imagination. The schematic is for a single coild (red/black coil, in image attached here are 5 or 6 coil transformers - double coils. In the latest image is a single coil video experiment name from channel). If you have any questions I will answer here.  I help anyone who wants to build a replica of the device through private message, live video, etc. It is more simply then it's look...
https://i.ibb.co/RN8zywW/coilsschematics.png
Tesla coil used image model:
https://i.ebayimg.com/images/g/NIcAAOSwuOFgY8JJ/s-l300.jpg

Watch:
https://www.youtube.com/watch?v=egJxVfiT3WU

https://www.youtube.com/watch?v=5TOwjKLf0WI
https://www.youtube.com/watch?v=l8erlKxUhYc
https://www.youtube.com/watch?v=5XQdbUHd1ic
https://www.youtube.com/watch?v=OwGOIP-ndEA
...more

Wow 😳 very impressive ! Thanks for sharing 🙏

[geovat]

Another experiment research by me in development, strange isn't?     
-------------------
https://www.youtube.com/watch?v=JrBTe0iO8fk
--------------------