Holcomb Energy Systems:Breakthrough technology to the world

[Semi]

Dear Fellows,

thank you all for your awesome research and work, very much appreciated.

I am wondering If someone could give me a clue, or point me to a direction where to look, what values Holcomb
is using for a single coil on his Salient Pole Rotor?
I've read and searched his patents, but I can't find any word about how much (milli) Henry and Copper Resistance
one of his coils has. Only the mention of 20V and 6amps I could find his Patent (US20190238011A1).

I would really like to know, what Time Constant τ (Tau) = L/R or rather Cutoff frequency he is driving.
And so If he is driving a coil in saturation or not?

Due to the structure of his Salient Pole Rotor, the coils go almost down to its center, it hints that he has created a relatively low inductor, with
a high Copper resistance but with relatively low number of turns. -> Higher Cutoff frequency

But then, he uses this 3.2 Ohms Resistor on his excitation board, which hints to a none saturation measurement, and without it, it would drive the coil
into saturation.

Thanks in advance

Cheers
Semi

[SolarLab]

Magnetic Gain and Domain Alignment-Relaxation

There seems to still be some confusion regarding the magnetic domain alignment, relaxation,
and re-alignment. The animated gif attached clearly shows the differences. Other animations
also exist in the previous link list.
*Apparently an animated gif can not be attached or will not work on this forum... Oh well.
If I recall correctly, that's why I went elsewhere to post. Pretty much done here anyway...

The link to the gif: https://www.overunityresearch.com/index.php?topic=4261.msg98901#msg98901

Three materials are simulated; ST37, polycarbonate and Steel 1008. ST37 has magnetic gain as well
as aligns, fully relaxes, then realigns. Polycarbonate has no gain but does align and relax. Steel 1008
has some gain but does not fully align nor fully relax. Legends of the isoline values are present on the RH side.
Complete alignment, complete relaxation and complete re-alignment occurs every 2 milliseconds in
the animation. Holcomb refers to this occuring every 4 milliseconds in his patent.


This gif viewer is good for stopping or slowing the animation:

https://sourceforge.net/projects/gifviewer/

A full report is also attached. Note the coil windings, current, timing, etc. are exactly same
for all three poles.
Hope this will help clearing up any misconceptions.

SL

[stivep]

platform with a million audience.
the system, - it watches over everything.

Yes it does. - adult sites too.and it doesn't make it much more or less visited.
it is a need to know or need to see that drives people into convincing particular webpage .
so all you need is to be convincing, and assisted with some money for advertising .

Russia, engineer Kornilov from the city of Rostov-on-Don died in December 2021
Flynn //...motor

Kapanadze, SR, Anonimus, Akula?, Stanley Meyer, and hundreds of others are dead.
I was lucky to escape.
recipe: don't bother to show too much,
People lost their lives not because
they had FE,but because they were convincing - some others didn't want you to talk about.
for example :
Russian government is not made from physicists, Pres. Putin doesn't use computer,
country is based on selling gas and oil.it is not in their interest to have people experimenting with Free Energy
In United States you must be much more convincing as cost of energy is not that critically impacting population.
but I don't take a conspiracy theory for granted.
people from corrupted countries tends to believe that everything around is corrupt,

interesting is that the link to your website is posted on livejournal.com
which is the most corrupted the most controlled by
Russian FSB Roskomnadzor (RKN) (Russian: Роскомнадзор [РКН]) , regime institutions.
the forefront of Russian propaganda.
Here is a link:
https://rakarskiyhttps://rakarskiy.livejournal.com/19384.html/19384.html

if you open this material in different browsers, this material is not available.
In "Opera" it is available to me 144 different articles, where the material is not available 140. I myself am surprised.

thank you for that information will check it out.
question: isn't it related to the geographic area you will writing from?

_________________________________________________________
https://www.allaboutcircuits.com/user-agreement/

Restricted topics. The following topics are considered "out of bounds" and will result in your thread being closed without question:
Any kind of over-unity devices and systems
Devices designed to electrocute or shock another person
Jammers intended for actual use in other than legal academic contexts
Amateur/homemade rail guns and other high-energy projectile devices
If You come across a thread or post discussing any of the above topics please report the thread so We can close, and if necessary remove, the offending thread/posts.

all about circuits - is a business
they do what they want and they have full rights to do it.
_{Perpetual motion doesn't exist
Overunity does not exist
solarlab cannot prove that it exists, nobody can prove that it exists,
and there was nobody ever who wrote scientific article, about it - approved by science.}

And all about circuits company doesn't want to lose nor the name nor the money.
Whether you like it or not this is how capitalism work.
Wesley

[rakarskiy]

***

Good time!

Everything is "corrupt", resources from the USA follow closed technologies no less than in other countries. It is a global system managed from a single cent.
Ukraine also ignores and controls the progress of OU systems and shuts them down.

If you take my Google blog https://rakatskiy.blogspot.com/2022/05/electric-solid-state-generator-tg.html (half of the text is not available)
Moved to the page https://rakatskiy.blogspot.com/p/ssgukraine.html on the same blog

I have not suffered from persecution mania for a long time. I make several information channels. Even if it will be the site of the predictor itself, I don't care, the main thing is to post it.

Sincerely.

PS
Much more convincing. https://rakatskiy.blogspot.com/2022/06/overunity-holcomb-energy-system.html

The question is that a patent is not enough for the production and sale of this device in the United States, certification and an agreement with the system are needed: what is possible, what is not.
Above in the text, we have already analyzed what the letter "B" at the end of the patent is - examination, this is enough to understand what the system is.

United Nations. Universal Declaration of Human Rights. Article 19
"Everyone has the right to freedom of opinion and expression; this right includes freedom
to hold opinions without interference and to seek, receive and impart information and ideas
by any means and regardless of frontiers."

[rakarskiy]

Magnetic Gain and Domain Alignment-Relaxation

There seems to still be some confusion regarding the magnetic domain alignment, relaxation,
and re-alignment. The animated gif attached clearly shows the differences. Other animations
also exist in the previous link list.
*Apparently an animated gif can not be attached or will not work on this forum... Oh well.
If I recall correctly, that's why I went elsewhere to post. Pretty much done here anyway...

The link to the gif: https://www.overunityresearch.com/index.php?topic=4261.msg98901#msg98901

Three materials are simulated; ST37, polycarbonate and Steel 1008. ST37 has magnetic gain as well
as aligns, fully relaxes, then realigns. Polycarbonate has no gain but does align and relax. Steel 1008
has some gain but does not fully align nor fully relax. Legends of the isoline values are present on the RH side.
Complete alignment, complete relaxation and complete re-alignment occurs every 2 milliseconds in
the animation. Holcomb refers to this occuring every 4 milliseconds in his patent.


This gif viewer is good for stopping or slowing the animation:

https://sourceforge.net/projects/gifviewer/

A full report is also attached. Note the coil windings, current, timing, etc. are exactly same
for all three poles.
Hope this will help clearing up any misconceptions.

SL

Much depends on the limiting frequency of remagnetization (hysteresis losses or eddy currents, this is when there is a residual field of the previous cycle in the core. And we are already forming a counter flow, if simple)

This is the main mistake of those who think that it is so easy to insert the stator of an induction motor to form a rotating excitation field. Or they do it on purpose to lead the layman into a dead end.

Very accessible about magnetization here   

Solids/ferro.html