Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of this Forum, I am asking that you help him
by making a donation on the Paypal Button above
Thanks to ALL for your help!!


EXACT MECHANISM OF THE OVERUNITY GAIN IN THE TPU

Started by Bruce_TPU, April 24, 2007, 08:50:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bruce_TPU

I have been told to no longer write in my own threads, so I have removed all the relevent posts that did not conform to their ideas.

Sorry.  Only post an idea here if "the group" agrees.  The "theory" police.

Regards.
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

tao

So, you want to play the 'I'm not technical, so that is how I could see through SM's words'-CARD...

Well, let me ask you this!!!

You are saying that you understand the TPU based on what SM said. That must mean that you take into account EVERYTHING that SM said, right?!?!

Well, did you happen to read SM's post where he says that the MAGNETS ARE NOT NEEDED FOR THE TPU TO WORK?


Based on you saying that you READ and LISTENED to SM, why did you happen to disregard that post? SM said that the TPU had to be able to start via a magnet, to show that it truely was OU, because people didn't like seeing any batteries in his devices. And yes, SM said that in his first devices he used batteries, but only to power the control circuitry. Maybe you need to read more...

You are getting all these guy's poor hopes up with your large posts where you blatantly say that you have the answer, even though you have not made a simple coil! What a shame...

Bruce_TPU

1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

tao

"The people of this forum are not mindless robots, but are very bright.  You say "poor guys" as if they can not think for themselves. "

Man, are you trying to flip this on me or what? Your actually trying to incinuate that I think the people here are robots??? Are you mad? Now you are offending me!

It's not going to work buddy. I am looking out for all the guys here.

I was here since day one, the people of this forum know this. I said 'poor guys' because there are many that are NEW to this forum and NEW to the TPU, and they come here seeing you say "LOOK EVERYONE, HERE IS THE ANSWER!!!", when all that you are really doing is reposting SM's words with some words capitalized to show meaning.

I am NOT targeting you, I am merely trying to show that you aren't really showing ANY answer at all, you are just resposting SM's words and claiming that 'we missed something.'

And what info did you give out? "Instead of keeping all of this info to myself, I chose to share it. " You just reposted SM's words.

This is over now, you obviously don't know how to discuss or debate logically, you have not addressed even one of my questions that clearly show you are in the wrong here. So, go ahead and flip it on me again and make me look like the bad guy.

I was trying to be nice to you when I said "Your intentions are well, but your aptitude for the TPU isn't."

The primary reason I posted that first reply to you was that you blasted your long post across at least 4 threads, claiming you HAD THE ANSWER, when all you did was repost SM's words. I didn't think that was right considering your post WAS FULL OF ERRORS.

And, to let you know something, I WILL be posting my final theory to the TPU, and my primary description of it won't include SM's posts, for the same reason that you can't define a word in a dictionary using that same word...

El Fin.....................................

Bruce_TPU

1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.