Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



The Brnbrade Coil/Overunity?

Started by Bruce_TPU, July 01, 2007, 12:14:40 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 39 40 41 42 43 ... 116
User actions

wattsup

#200
July 03, 2007, 01:27:41 PM
@all

I did a few phorensic dimensional measurements - CSI style.

Took a reference off the transitor on Trial #5 - center circle being 3/4".

Came up the the following dimensions for the coils.

May not be totally exact but it's the best one can do with what is given.

MeggerMan

#201
July 03, 2007, 01:39:37 PM
Quote from: jacob on July 03, 2007, 10:20:06 AM
Quote from: z_p_e on July 02, 2007, 10:59:40 PM

It would not be too difficult to power a 12V, 50W bulb for a few minutes from 2 AA batteries with the right circuit. Keep that in mind folks.

Darren
I need your help here. I have no idea how this would be possible. Because it would imply pulling upward of 10-15 amps from those small batteries and maintaining that draw for a few minutes. Plus, let's keep in mind that there is no high speed switching component being used here. Can you please explain how it can be done. Thanks!

@All,
So just how much power can you pull out of two AA batteries?
I have just completed a test using various NiMH batteries as the other zinc carbon batteries I have are nearly flat, perhaps someone can test these:

Cell = 1 x AA size GP 2700 mAh 1.2V
Test load = 0.8 Ohm resistor (3 x 2.2R in parallel)
Output = 1.25A @ 1V

I tried heavier loads but the voltage drops further, so 1.25 watts seems about the limit.
2 x AA cells should provide about 2.5 watts but this may cause the batteries to explode because of the relatively high current draw.
So Darren, hopefully you are correct, with the right circuit you CAN light a 24V car headlamp halogen bulb. The right circuit being a TPU!

Regards
Rob Ã, 

jacob

#202
July 03, 2007, 02:04:59 PM
Rob,

Thanks for the info. I agree with you that drawing that much current from the cells would be dangerous. Actually, you probably noticed some overheating during testing didn't you?

Quote from: Earl on July 03, 2007, 11:59:17 AM
Rich, no power should be input.  It is the Creator's aether which is the input power. 

Thanks for the quote Earl. I just love it when I hear stuff like that! 

Jacob

Bruce_TPU

#203
July 03, 2007, 02:17:15 PM
@ Earl
@ Wattsup

I have updated page 1 with your information.  Thank you both.

@ALL
I will no longer post any more "Theories" of operation on page 1.  Only build information to assist replication.

Happy Days!  :)
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

chrisC

#204
July 03, 2007, 02:26:02 PM
Quote from: btentzer on July 03, 2007, 02:17:15 PM

@ALL
I will no longer post any more "Theories" of operation on page 1.  Only build information to assist replication.

Happy Days!  :)
Bruce

Bruce:

Thank you for the good job in putting the build info. together for easy access. I also want to thank you for your time, channeling excitement into this Forum and sometimes, even your out of this world suggestions.

However, some of us would rather not hear of wildly speculative theories unless there really is really good grounds for suggesting it. Out of context, these things are very confusing. What we need is FOCUS and Quality Test results which are reproducible and hopefully quite explainable when the code is cracked!

Nevertheless, great job and well done! Thanks.

chrisC
Print
Go Up Pages 1 ... 39 40 41 42 43 ... 116
User actions